Initial Profile Sources

profile_sources/non-prusa-fff/gCreate/print/0.20mm - Dual 2in1 PLA with PVA Support @GCREATE.ini

@@ -0,0 +1,151 @@
+[print:0.20mm - Dual 2in1 PLA with PVA Support @GCREATE]
+inherits = *0.20mm*; 0.20mm - Dual 2in1 @GCREATE
+compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 400
+dont_support_bridges = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 1
+extrusion_width = 0
+fill_angle = 45
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.23
+first_layer_speed = 35
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 15
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 65
+perimeters = 4
+post_process = 
+print_settings_id = 0.20mm - Dual 2in1 @GCREATE PLA PVA Support
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 35
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 2
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 2
+support_material_interface_layers = 4
+support_material_interface_spacing = 0
+support_material_interface_speed = 90%
+support_material_pattern = rectilinear-grid
+support_material_spacing = 3
+support_material_speed = 65
+support_material_synchronize_layers = 1
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 0
+thin_walls = 1
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 35
+top_solid_layers = 4
+top_solid_min_thickness = 0
+travel_speed = 130
+wipe_tower = 1
+wipe_tower_bridging = 20
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 75
+wipe_tower_x = 50
+wipe_tower_y = 400
+
+
+
+##################################
+#  SET FILAMENT VARIANTS         #
+##################################
+
+# TEMPLATE
+
+#[filament:*PLA*]
+#inherits = *common*
+
+#filament_type = PLA
+#filament_density = 1.24
+#filament_cost = 20
+
+#first_layer_bed_temperature = 60
+#first_layer_temperature = 200
+#temperature = 200
+#bed_temperature = 60
+
+#fan_always_on = 1
+#cooling = 1
+#disable_fan_first_layers = 1
+#max_fan_speed = 90
+#min_fan_speed = 90
+#bridge_fan_speed = 75
+
+#fan_below_layer_time = 15
+#slowdown_below_layer_time = 10
+
+#compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
+
+# Common filament preset across all filaments