Initial Profile Sources

2026-07-08 00:41:08 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,10 @@
+[printer:Q1 Pro 0.2 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.2 nozzle
+default_print_profile = 0.12mm Fine @Q1 Pro 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
@@ -0,0 +1,6 @@
+[printer:Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.4 nozzle
+default_print_profile = 0.20mm Fine @Q1 Pro 0.4 nozzle
+retract_length = 0.8
+
@@ -0,0 +1,11 @@
+[printer:Q1 Pro 0.6 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.6 nozzle
+default_print_profile = 0.30mm Fine @Q1 Pro 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
@@ -0,0 +1,11 @@
+[printer:Q1 Pro 0.8 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.8 nozzle
+default_print_profile = 0.40mm Fine @Q1 Pro 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
+# X-MAX 3 preset
@@ -0,0 +1,10 @@
+[printer:X-MAX 3 0.2 nozzle]
+inherits = *X-MAX 3*
+default_filament_profile = Generic PLA @X-MAX 3 0.2 nozzle
+default_print_profile = 0.12mm Fine @X-MAX 3 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
@@ -0,0 +1,5 @@
+[printer:X-MAX 3 0.4 nozzle]
+inherits = *X-MAX 3*
+default_filament_profile = Generic PLA @X-MAX 3 0.4 nozzle
+default_print_profile = 0.20mm Fine @X-MAX 3 0.4 nozzle
+
@@ -0,0 +1,11 @@
+[printer:X-MAX 3 0.6 nozzle]
+inherits = *X-MAX 3*
+default_filament_profile = Generic PLA @X-MAX 3 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-MAX 3 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
@@ -0,0 +1,11 @@
+[printer:X-MAX 3 0.8 nozzle]
+inherits = *X-MAX 3*
+default_filament_profile = Generic PLA @X-MAX 3 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-MAX 3 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
+# X-Plus 3 preset
@@ -0,0 +1,10 @@
+[printer:X-Plus 3 0.2 nozzle]
+inherits = *X-Plus 3*
+default_filament_profile = Generic PLA @X-Plus 3 0.2 nozzle
+default_print_profile = 0.12mm Fine @X-Plus 3 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
@@ -0,0 +1,5 @@
+[printer:X-Plus 3 0.4 nozzle]
+inherits = *X-Plus 3*
+default_filament_profile = Generic PLA @X-Plus 3 0.4 nozzle
+default_print_profile = 0.20mm Fine @X-Plus 3 0.4 nozzle
+
@@ -0,0 +1,11 @@
+[printer:X-Plus 3 0.6 nozzle]
+inherits = *X-Plus 3*
+default_filament_profile = Generic PLA @X-Plus 3 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-Plus 3 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
@@ -0,0 +1,11 @@
+[printer:X-Plus 3 0.8 nozzle]
+inherits = *X-Plus 3*
+default_filament_profile = Generic PLA @X-Plus 3 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-Plus 3 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
+# X-smart 3 preset
@@ -0,0 +1,10 @@
+[printer:X-Plus 4 0.2 nozzle]
+inherits = *X-Plus 4*
+default_filament_profile = Generic PLA @X-Plus 4 0.2 nozzle
+default_print_profile = 0.12mm Fine @X-Plus 4 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
@@ -0,0 +1,6 @@
+[printer:X-Plus 4 0.4 nozzle]
+inherits = *X-Plus 4*
+default_filament_profile = Generic PLA @X-Plus 4 0.4 nozzle
+default_print_profile = 0.20mm Fine @X-Plus 4 0.4 nozzle
+retract_length = 0.8
+
@@ -0,0 +1,11 @@
+[printer:X-Plus 4 0.6 nozzle]
+inherits = *X-Plus 4*
+default_filament_profile = Generic PLA @X-Plus 4 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-Plus 4 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
@@ -0,0 +1,11 @@
+[printer:X-Plus 4 0.8 nozzle]
+inherits = *X-Plus 4*
+default_filament_profile = Generic PLA @X-Plus 4 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-Plus 4 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
+# Q1 Pro preset
@@ -0,0 +1,10 @@
+[printer:X-smart 3 0.2 nozzle]
+inherits = *X-smart 3*
+default_filament_profile = Generic PLA @X-smart 3 0.2 nozzle
+default_print_profile = 0.12mm Fine @X-smart 3 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
@@ -0,0 +1,5 @@
+[printer:X-smart 3 0.4 nozzle]
+inherits = *X-smart 3*
+default_filament_profile = Generic PLA @X-smart 3 0.4 nozzle
+default_print_profile = 0.20mm Fine @X-smart 3 0.4 nozzle
+
@@ -0,0 +1,11 @@
+[printer:X-smart 3 0.6 nozzle]
+inherits = *X-smart 3*
+default_filament_profile = Generic PLA @X-smart 3 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-smart 3 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
@@ -0,0 +1,9 @@
+[printer:X-smart 3 0.8 nozzle]
+inherits = *X-smart 3*
+default_filament_profile = Generic PLA @X-smart 3 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-smart 3 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
@@ -0,0 +1,15 @@
+[printer:*Q1 Pro*]
+inherits = *common*
+printer_model = Q1 Pro
+autoemit_temperature_commands = 0
+auxiliary_fan = 1
+bed_exclude_area = 0x0,0x0,25x240,25x245,115x245,115x240,25x240,0x0,0x0,208x240,208x245,245x245,245x240,208x240,0x0
+bed_shape = 0x0,245x0,245x245,0x245
+before_layer_gcode = TIMELAPSE_TAKE_FRAME
+chamber_temperature_control = 1
+max_print_height = 240
+retract_lift_below = 239
+start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[chamber_minimal_temperature]\nM83\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nM141 S[chamber_minimal_temperature]\nG4 P3000\nT[initial_tool]\n{position[0] = max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)}\n{position[1] = max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)}\n{position[2] = 0.5 * first_layer_height * nozzle_diameter[0]}\nG0 X{position[0]} Y{position[1]} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{position[0] + 85} E{85 * position[2]} F3000\nG1 Y{position[1] + 2} E{2 * position[2]}\nG1 X{position[0]} E{85 * position[2]}\nG1 Y{position[1] + 85} E{83 * position[2]}\nG1 X{position[0] + 2} E{2 * position[2]}\nG1 Y{position[1] + 3} E{82 * position[2]}\nG1 X{position[0] + 3} Z0\nG1 X{position[0] + 6}\nG1 Z1 F600\n
+thumbnails = 160x160/PNG, 112x112/PNG
+wipe_device = 1
+
@@ -0,0 +1,10 @@
+[printer:*X-MAX 3*]
+inherits = *common*
+printer_model = X-MAX 3
+auxiliary_fan = 1
+bed_shape = 0x0,325x0,325x325,0x325
+chamber_temperature_control = 1
+max_print_height = 315
+retract_lift_below = 314
+thumbnails = 380x380/QIDI, 210x210/QIDI, 110x110/PNG
+
@@ -0,0 +1,10 @@
+[printer:*X-Plus 3*]
+inherits = *common*
+printer_model = X-Plus 3
+auxiliary_fan = 1
+bed_shape = 0x0,280x0,280x280,0x280
+chamber_temperature_control = 1
+max_print_height = 270
+retract_lift_below = 269
+thumbnails = 380x380/QIDI, 210x210/QIDI, 110x110/PNG
+
@@ -0,0 +1,18 @@
+[printer:*X-Plus 4*]
+inherits = *common*
+printer_model = X-Plus 4
+autoemit_temperature_commands = 0
+auxiliary_fan = 1
+bed_exclude_area = 0x0,0x0,0x302,0x305,35x302,35x302,0x302,0x0,0x0,293x0,293x20,305x20,305x0,293x0,0x0
+bed_shape = 0x0,305x0,305x305,0x305
+before_layer_gcode = TIMELAPSE_TAKE_FRAME
+chamber_temperature_control = 1
+end_gcode = M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 Y290 F12000\nG0 X90 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}
+layer_gcode = G92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}
+machine_max_feedrate_z = 20
+max_print_height = 280
+retract_lift_below = 279
+start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[chamber_minimal_temperature]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nM141 S[chamber_minimal_temperature]\nG4 P3000\nT[initial_tool]\n{position[0] = max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)}\n{position[1] = max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85), 0)}\n{position[2] = 0.5 * first_layer_height * nozzle_diameter[0]}\n{if position[0] <= 35 and position[1] >= 217} {position[1] = 217} {endif}\n{if position[0] >= 208 and position[1] <= 20} {position[0] = 208} {endif}\nG0 X{position[0]} Y{position[1]} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{position[0] + 85} E{85 * position[2]} F3000\nG1 Y{position[1] + 2} E{2 * position[2]}\nG1 X{position[0]} E{85 * position[2]}\nG1 Y{position[1] + 85} E{83 * position[2]}\nG1 X{position[0] + 2} E{2 * position[2]}\nG1 Y{position[1] + 3} E{82 * position[2]}\nG1 X{position[0] + 3} Z0\nG1 X{position[0] + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1\n
+thumbnails = 272x272/PNG, 96x96/PNG
+wipe_device = 1
+
@@ -0,0 +1,8 @@
+[printer:*X-smart 3*]
+inherits = *common*
+printer_model = X-smart 3
+bed_shape = 0x0,175x0,175x180,0x180
+max_print_height = 170
+retract_lift_below = 169
+thumbnails = 205x205/QIDI, 140x140/QIDI, 110x110/PNG
+
@@ -0,0 +1,94 @@
+[printer:*common*]
+autoemit_temperature_commands = 1
+auxiliary_fan = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_exclude_area = 0x0
+bed_shape = 0x0,325x0,325x325,0x325
+before_layer_gcode = 
+between_objects_gcode = 
+binary_gcode = 0
+chamber_fan = 1
+chamber_temperature_control = 0
+color_change_gcode = M0
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0
+end_gcode = M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+host_type = moonraker
+inherits = 
+layer_gcode = G92 E0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 20000
+machine_max_acceleration_retracting = 5000
+machine_max_acceleration_travel = 1500
+machine_max_acceleration_x = 20000
+machine_max_acceleration_y = 20000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 30
+machine_max_feedrate_x = 600
+machine_max_feedrate_y = 600
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 2
+machine_max_jerk_x = 9
+machine_max_jerk_y = 9
+machine_max_jerk_z = 3
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.28
+max_print_height = 315
+min_layer_height = 0.08
+multimaterial_purging = 45
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M0
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = QIDI
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 2
+retract_lift = 0.4
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = PRINT_START\nG28\nM141 S[chamber_minimal_temperature]\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29; mesh bed leveling, comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM106 P3 S255\nM83\nG4 P3000\nT[initial_tool]\n{position[0] = max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)}\n{position[1] = max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85), 0)}\n{position[2] = 0.5 * first_layer_height * nozzle_diameter[0]}\nG0 X{position[0]} Y{position[1]} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{position[0] + 85} E{85 * position[2]} F3000\nG1 Y{position[1] + 2} E{2 * position[2]}\nG1 X{position[0]} E{85 * position[2]}\nG1 Y{position[1] + 85} E{83 * position[2]}\nG1 X{position[0] + 2} E{2 * position[2]}\nG1 Y{position[1] + 3} E{82 * position[2]}\nG1 X{position[0] + 12} E{-10 * position[2]}\nG1 E{10 * position[2]} F3000\n
+template_custom_gcode = 
+thumbnails = 
+thumbnails_format = PNG
+travel_lift_before_obstacle = 0
+travel_max_lift = 0.4
+travel_ramping_lift = 1
+travel_slope = 3
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+wipe_device = 0
+wipe_distance = 2
+z_offset = 0
+
+# X-Plus 4 preset