Import OrcaSlicer Profiles

profile_sources/orcaslicer-fff/Creality/filament/Creality Generic ABS @Ender-3V3-all.json

@@ -0,0 +1,25 @@
+{
+	"type": "filament",
+	"name": "Creality Generic ABS @Ender-3V3-all",
+	"inherits": "Creality Generic ABS",
+	"from": "system",
+	"setting_id": "GFSA04_CREALITY_00",
+	"instantiation": "true",
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"compatible_printers": [
+		"Creality Ender-3 V3 SE 0.2 nozzle",
+		"Creality Ender-3 V3 SE 0.4 nozzle",
+		"Creality Ender-3 V3 SE 0.6 nozzle",
+		"Creality Ender-3 V3 SE 0.8 nozzle",
+		"Creality Ender-3 V3 KE 0.4 nozzle",
+		"Creality Ender-3 V3 0.4 nozzle",
+		"Creality Ender-3 V3 0.6 nozzle",
+		"Creality Ender-3 V3 Plus 0.4 nozzle",
+		"Creality Ender-3 V3 Plus 0.6 nozzle"
+	]
+}

profile_sources/orcaslicer-fff/Creality/filament/Creality Generic ABS @Ender-5Max-all.json

@@ -0,0 +1,107 @@
+{
+	"type": "filament",
+	"name": "Creality Generic ABS @Ender-5Max-all",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"setting_id": "GFSA04_CREALITY_00",
+	"filament_id": "07001",
+	"instantiation": "true",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "0",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality Ender-5 Max 0.4 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "80",
+	"cool_plate_temp": "90",
+	"cool_plate_temp_initial_layer": "90",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "60",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"eng_plate_temp": "105",
+	"eng_plate_temp_initial_layer": "105",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "20",
+	"fan_min_speed": "20",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": [
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.85",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": [
+		"35"
+	],
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "0",
+	"filament_retract_lift_below": "0",
+	"filament_retract_lift_enforce": "All Surfaces",
+	"filament_retract_restart_extra": "0",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "nil",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; Filament gcode\n"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"ABS"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "90",
+	"hot_plate_temp_initial_layer": "90",
+	"nozzle_temperature": "260",
+	"nozzle_temperature_initial_layer": "260",
+	"nozzle_temperature_range_high": "260",
+	"nozzle_temperature_range_low": "230",
+	"overhang_fan_speed": "20",
+	"overhang_fan_threshold": "25%",
+	"pressure_advance": "0.03",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "5",
+	"slow_down_min_speed": "10",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": "90",
+	"textured_plate_temp_initial_layer": "90"
+}

profile_sources/orcaslicer-fff/Creality/filament/Creality Generic ABS @Hi-all.json

@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+	"name": "Creality Generic ABS @Hi-all",
+	"inherits": "Creality Generic ABS",
+	"from": "system",
+	"setting_id": "GFSA04_CREALITY_00",
+	"instantiation": "true",
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"
+	],
+	"compatible_printers": [
+		"Creality Hi 0.4 nozzle",
+		"Creality Hi 0.6 nozzle"
+	]
+}

profile_sources/orcaslicer-fff/Creality/filament/Creality Generic ABS @K1-all.json

@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Creality Generic ABS @K1-all",
+	"inherits": "Creality Generic ABS",
+	"from": "system",
+	"setting_id": "GFSA04_CREALITY_00",
+	"instantiation": "true",
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"compatible_printers": [
+		"Creality K1C 0.4 nozzle",
+		"Creality K1C 0.6 nozzle",
+		"Creality K1C 0.8 nozzle",
+		"Creality K1 SE 0.4 nozzle"
+	]
+}