mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-01 02:27:17 +00:00
Import OrcaSlicer Profiles
This commit is contained in:
Dark98
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 19 KiB |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 42 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 42 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 7.3 KiB |
Binary file not shown.
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 41 KiB |
Binary file not shown.
@@ -0,0 +1 @@
|
||||
<svg width="430" height="430" fill="none" xmlns="http://www.w3.org/2000/svg"><path opacity=".9" fill-rule="evenodd" clip-rule="evenodd" d="m368.377 412.523 5.629 5.416 3.415.332-4.454-3.917-4.59-1.831Z" fill="#fff"/><path fill-rule="evenodd" clip-rule="evenodd" d="m373.927 417.992-5.626-5.434-3.467 6.239 3.868 5.772 5.225-6.577ZM368.777 424.583l5.237-6.557 3.427.305-4.115 4.602-4.549 1.65Z" fill="#fff"/><path d="M393.901 415.736h-1.504l1.531 2.166.766-1.039-.793-1.127ZM390.735 418.926l-3.811-3.375v1.631l5.039 4.45v-5.896h-1.228v3.19ZM396.399 415.736l-2.036 2.786v2.927h1.234v-2.528l2.324-3.185h-1.522ZM382.474 416.806l1.29 2.488h-.483l-.613 1.2h1.705l.498.955h1.377l-3.078-5.975-.696 1.332ZM386.924 421.449v.003h1.228v-2.286l-1.228-1.079v3.362Z" fill="#fff"/><path d="m382.103 417.545-2.007 3.905h1.372l1.319-2.563-.684-1.342ZM413.853 419.118a1.55 1.55 0 0 0 .545-.256 1.668 1.668 0 0 0 .684-1.412 1.61 1.61 0 0 0-.68-1.36 1.646 1.646 0 0 0-.575-.276 3.61 3.61 0 0 0-.861-.078h-.309v1.214h.441c.191-.015.382.015.559.088a.443.443 0 0 1 .221.416.482.482 0 0 1-.279.466 1.392 1.392 0 0 1-.547.077h-.395v1.2h.441a3.09 3.09 0 0 0 .755-.079ZM398.496 416.768a2.934 2.934 0 0 0-.624 1.836 3.012 3.012 0 0 0 1.174 2.375c.441.337.962.553 1.513.624v-1.239a1.841 1.841 0 0 1-1.129-.753 1.779 1.779 0 0 1-.159-1.751 1.75 1.75 0 0 1 .441-.611c.245-.209.537-.354.852-.421v-1.242a3.05 3.05 0 0 0-2.068 1.182ZM402.331 417.525l.962-.765a2.88 2.88 0 0 0-.882-.788 3.158 3.158 0 0 0-1.161-.377v1.242c.434.086.82.332 1.081.688ZM423.393 417.525l.964-.765a2.905 2.905 0 0 0-.882-.788 3.146 3.146 0 0 0-1.161-.377v1.242c.433.087.819.332 1.079.688ZM413.886 419.578c.009.04.014.081.014.122a.465.465 0 0 1-.322.486 1.727 1.727 0 0 1-.516.058h-.395v1.201h.403c.265.005.529-.019.788-.071.195-.044.378-.125.541-.24a1.748 1.748 0 0 0 .719-1.41 1.826 1.826 0 0 0-.151-.743c-.275.324-.66.537-1.081.597ZM419.56 416.768a2.92 2.92 0 0 0-.622 1.836 2.994 2.994 0 0 0 1.173 2.375 3.15 3.15 0 0 0 1.514.624v-1.239a1.842 1.842 0 0 1-1.132-.753 1.776 1.776 0 0 1-.159-1.751 1.73 1.73 0 0 1 .441-.611 1.92 1.92 0 0 1 .852-.421v-1.242a3.046 3.046 0 0 0-2.067 1.182ZM401.243 420.366v1.242a2.993 2.993 0 0 0 2.063-1.169l-.971-.752a1.797 1.797 0 0 1-1.092.679ZM423.398 419.687c-.27.355-.663.598-1.103.679v1.242c.406-.044.798-.17 1.154-.371a3 3 0 0 0 .91-.798l-.961-.752ZM417.626 415.736h-1.23v5.713h1.23v-5.713ZM405.92 419.832c-.125-.3-.18-.626-.159-.95v-3.146h-1.233v3.258c-.011.35.036.698.137 1.032.095.284.25.545.454.764.183.204.4.374.642.502.241.134.503.225.775.272v-1.255a1.118 1.118 0 0 1-.616-.477ZM407.999 418.886c.021.33-.037.661-.167.964a1.083 1.083 0 0 1-.62.459v1.255a2.41 2.41 0 0 0 .778-.267c.241-.133.459-.304.644-.507a2.07 2.07 0 0 0 .457-.764 3.3 3.3 0 0 0 .137-1.032v-3.258h-1.229v3.15ZM411.97 415.736h-1.23v5.713h1.23v-5.713Z" fill="#fff"/></svg>
|
||||
|
After Width: | Height: | Size: 2.8 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 37 KiB |
Binary file not shown.
@@ -0,0 +1 @@
|
||||
<svg width="230" height="230" fill="none" xmlns="http://www.w3.org/2000/svg"><path opacity=".9" fill-rule="evenodd" clip-rule="evenodd" d="m168.09 210.559 5.655 5.417 3.431.333-4.475-3.918-4.611-1.832Z" fill="#fff"/><path fill-rule="evenodd" clip-rule="evenodd" d="m173.666 216.029-5.652-5.435-3.483 6.241 3.886 5.773 5.249-6.579ZM168.493 222.622l5.261-6.56 3.443.306-4.134 4.603-4.57 1.651Z" fill="#fff"/><path d="M193.734 213.772h-1.511l1.538 2.167.769-1.038-.796-1.129ZM190.552 216.964l-3.829-3.377v1.631l5.064 4.453v-5.898h-1.235v3.191ZM196.243 213.772l-2.045 2.787v2.929h1.238v-2.529l2.336-3.187h-1.529ZM182.253 214.843l1.296 2.489h-.485l-.616 1.2h1.713l.501.956h1.383l-3.092-5.978-.7 1.333ZM186.723 219.488v.002h1.234v-2.286l-1.234-1.08v3.364Z" fill="#fff"/><path d="m181.881 215.582-2.017 3.906h1.379l1.325-2.564-.687-1.342ZM213.778 217.155c.198-.049.384-.137.548-.256a1.656 1.656 0 0 0 .687-1.412 1.598 1.598 0 0 0-.683-1.361 1.677 1.677 0 0 0-.578-.276 3.639 3.639 0 0 0-.865-.078h-.31v1.214h.443c.192-.015.384.015.561.089a.437.437 0 0 1 .222.416.482.482 0 0 1-.28.466 1.404 1.404 0 0 1-.549.077h-.397v1.2h.443c.255.005.51-.021.758-.079ZM198.35 214.805a2.927 2.927 0 0 0-.627 1.836 3 3 0 0 0 1.179 2.377 3.19 3.19 0 0 0 1.52.624v-1.24a1.848 1.848 0 0 1-1.134-.752 1.773 1.773 0 0 1-.16-1.753c.102-.233.253-.442.443-.611.246-.209.54-.354.856-.421v-1.242a3.076 3.076 0 0 0-2.077 1.182ZM202.202 215.562l.966-.766a2.884 2.884 0 0 0-.886-.788c-.36-.2-.756-.328-1.166-.377v1.243c.436.085.824.331 1.086.688ZM223.363 215.562l.968-.766a2.921 2.921 0 0 0-.886-.788c-.36-.2-.756-.328-1.166-.377v1.243a1.77 1.77 0 0 1 1.084.688ZM213.811 217.616c.009.04.014.081.014.121a.462.462 0 0 1-.324.486 1.71 1.71 0 0 1-.518.06h-.397v1.2h.405c.266.005.531-.018.792-.071.195-.044.379-.125.543-.24a1.745 1.745 0 0 0 .722-1.41 1.826 1.826 0 0 0-.151-.743 1.763 1.763 0 0 1-1.086.597ZM219.511 214.805a2.911 2.911 0 0 0-.625 1.836 2.995 2.995 0 0 0 1.179 2.377 3.17 3.17 0 0 0 1.521.624v-1.24a1.845 1.845 0 0 1-1.137-.752 1.78 1.78 0 0 1-.16-1.753c.101-.234.252-.442.443-.611a1.94 1.94 0 0 1 .856-.421v-1.242a3.076 3.076 0 0 0-2.077 1.182ZM201.109 218.404v1.242a2.993 2.993 0 0 0 2.072-1.169l-.975-.753a1.803 1.803 0 0 1-1.097.68ZM223.367 217.724a1.796 1.796 0 0 1-1.108.68v1.242a3.007 3.007 0 0 0 2.074-1.169l-.966-.753ZM217.568 213.772h-1.235v5.716h1.235v-5.716ZM205.808 217.87a2.11 2.11 0 0 1-.16-.951v-3.147h-1.239v3.259c-.011.35.036.698.138 1.033.095.285.251.544.456.763.184.205.402.375.645.503.242.134.505.225.778.272v-1.255a1.119 1.119 0 0 1-.618-.477ZM207.897 216.924c.021.329-.037.66-.168.964a1.09 1.09 0 0 1-.623.459v1.255c.274-.044.539-.134.782-.267.242-.133.461-.304.647-.508.207-.218.363-.478.459-.763.1-.335.146-.683.137-1.033v-3.259h-1.234v3.152ZM211.886 213.772h-1.235v5.716h1.235v-5.716Z" fill="#fff"/></svg>
|
||||
|
After Width: | Height: | Size: 2.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 39 KiB |
Binary file not shown.
@@ -0,0 +1 @@
|
||||
<svg width="230" height="230" fill="none" xmlns="http://www.w3.org/2000/svg"><path opacity=".9" fill-rule="evenodd" clip-rule="evenodd" d="m168.09 210.559 5.655 5.417 3.431.333-4.475-3.918-4.611-1.832Z" fill="#fff"/><path fill-rule="evenodd" clip-rule="evenodd" d="m173.666 216.029-5.652-5.435-3.483 6.241 3.886 5.773 5.249-6.579ZM168.493 222.622l5.261-6.56 3.443.306-4.134 4.603-4.57 1.651Z" fill="#fff"/><path d="M193.734 213.772h-1.511l1.538 2.167.769-1.038-.796-1.129ZM190.552 216.964l-3.829-3.377v1.631l5.064 4.453v-5.898h-1.235v3.191ZM196.243 213.772l-2.045 2.787v2.929h1.238v-2.529l2.336-3.187h-1.529ZM182.253 214.843l1.296 2.489h-.485l-.616 1.2h1.713l.501.956h1.383l-3.092-5.978-.7 1.333ZM186.723 219.488v.002h1.234v-2.286l-1.234-1.08v3.364Z" fill="#fff"/><path d="m181.881 215.582-2.017 3.906h1.379l1.325-2.564-.687-1.342ZM213.778 217.155c.198-.049.384-.137.548-.256a1.656 1.656 0 0 0 .687-1.412 1.598 1.598 0 0 0-.683-1.361 1.677 1.677 0 0 0-.578-.276 3.639 3.639 0 0 0-.865-.078h-.31v1.214h.443c.192-.015.384.015.561.089a.437.437 0 0 1 .222.416.482.482 0 0 1-.28.466 1.404 1.404 0 0 1-.549.077h-.397v1.2h.443c.255.005.51-.021.758-.079ZM198.35 214.805a2.927 2.927 0 0 0-.627 1.836 3 3 0 0 0 1.179 2.377 3.19 3.19 0 0 0 1.52.624v-1.24a1.848 1.848 0 0 1-1.134-.752 1.773 1.773 0 0 1-.16-1.753c.102-.233.253-.442.443-.611.246-.209.54-.354.856-.421v-1.242a3.076 3.076 0 0 0-2.077 1.182ZM202.202 215.562l.966-.766a2.884 2.884 0 0 0-.886-.788c-.36-.2-.756-.328-1.166-.377v1.243c.436.085.824.331 1.086.688ZM223.363 215.562l.968-.766a2.921 2.921 0 0 0-.886-.788c-.36-.2-.756-.328-1.166-.377v1.243a1.77 1.77 0 0 1 1.084.688ZM213.811 217.616c.009.04.014.081.014.121a.462.462 0 0 1-.324.486 1.71 1.71 0 0 1-.518.06h-.397v1.2h.405c.266.005.531-.018.792-.071.195-.044.379-.125.543-.24a1.745 1.745 0 0 0 .722-1.41 1.826 1.826 0 0 0-.151-.743 1.763 1.763 0 0 1-1.086.597ZM219.511 214.805a2.911 2.911 0 0 0-.625 1.836 2.995 2.995 0 0 0 1.179 2.377 3.17 3.17 0 0 0 1.521.624v-1.24a1.845 1.845 0 0 1-1.137-.752 1.78 1.78 0 0 1-.16-1.753c.101-.234.252-.442.443-.611a1.94 1.94 0 0 1 .856-.421v-1.242a3.076 3.076 0 0 0-2.077 1.182ZM201.109 218.404v1.242a2.993 2.993 0 0 0 2.072-1.169l-.975-.753a1.803 1.803 0 0 1-1.097.68ZM223.367 217.724a1.796 1.796 0 0 1-1.108.68v1.242a3.007 3.007 0 0 0 2.074-1.169l-.966-.753ZM217.568 213.772h-1.235v5.716h1.235v-5.716ZM205.808 217.87a2.11 2.11 0 0 1-.16-.951v-3.147h-1.239v3.259c-.011.35.036.698.138 1.033.095.285.251.544.456.763.184.205.402.375.645.503.242.134.505.225.778.272v-1.255a1.119 1.119 0 0 1-.618-.477ZM207.897 216.924c.021.329-.037.66-.168.964a1.09 1.09 0 0 1-.623.459v1.255c.274-.044.539-.134.782-.267.242-.133.461-.304.647-.508.207-.218.363-.478.459-.763.1-.335.146-.683.137-1.033v-3.259h-1.234v3.152ZM211.886 213.772h-1.235v5.716h1.235v-5.716Z" fill="#fff"/></svg>
|
||||
|
After Width: | Height: | Size: 2.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 39 KiB |
Binary file not shown.
@@ -0,0 +1 @@
|
||||
<svg width="230" height="230" fill="none" xmlns="http://www.w3.org/2000/svg"><path opacity=".9" fill-rule="evenodd" clip-rule="evenodd" d="m168.09 210.559 5.655 5.417 3.431.333-4.475-3.918-4.611-1.832Z" fill="#fff"/><path fill-rule="evenodd" clip-rule="evenodd" d="m173.666 216.029-5.652-5.435-3.483 6.241 3.886 5.773 5.249-6.579ZM168.493 222.622l5.261-6.56 3.443.306-4.134 4.603-4.57 1.651Z" fill="#fff"/><path d="M193.734 213.772h-1.511l1.538 2.167.769-1.038-.796-1.129ZM190.552 216.964l-3.829-3.377v1.631l5.064 4.453v-5.898h-1.235v3.191ZM196.243 213.772l-2.045 2.787v2.929h1.238v-2.529l2.336-3.187h-1.529ZM182.253 214.843l1.296 2.489h-.485l-.616 1.2h1.713l.501.956h1.383l-3.092-5.978-.7 1.333ZM186.723 219.488v.002h1.234v-2.286l-1.234-1.08v3.364Z" fill="#fff"/><path d="m181.881 215.582-2.017 3.906h1.379l1.325-2.564-.687-1.342ZM213.778 217.155c.198-.049.384-.137.548-.256a1.656 1.656 0 0 0 .687-1.412 1.598 1.598 0 0 0-.683-1.361 1.677 1.677 0 0 0-.578-.276 3.639 3.639 0 0 0-.865-.078h-.31v1.214h.443c.192-.015.384.015.561.089a.437.437 0 0 1 .222.416.482.482 0 0 1-.28.466 1.404 1.404 0 0 1-.549.077h-.397v1.2h.443c.255.005.51-.021.758-.079ZM198.35 214.805a2.927 2.927 0 0 0-.627 1.836 3 3 0 0 0 1.179 2.377 3.19 3.19 0 0 0 1.52.624v-1.24a1.848 1.848 0 0 1-1.134-.752 1.773 1.773 0 0 1-.16-1.753c.102-.233.253-.442.443-.611.246-.209.54-.354.856-.421v-1.242a3.076 3.076 0 0 0-2.077 1.182ZM202.202 215.562l.966-.766a2.884 2.884 0 0 0-.886-.788c-.36-.2-.756-.328-1.166-.377v1.243c.436.085.824.331 1.086.688ZM223.363 215.562l.968-.766a2.921 2.921 0 0 0-.886-.788c-.36-.2-.756-.328-1.166-.377v1.243a1.77 1.77 0 0 1 1.084.688ZM213.811 217.616c.009.04.014.081.014.121a.462.462 0 0 1-.324.486 1.71 1.71 0 0 1-.518.06h-.397v1.2h.405c.266.005.531-.018.792-.071.195-.044.379-.125.543-.24a1.745 1.745 0 0 0 .722-1.41 1.826 1.826 0 0 0-.151-.743 1.763 1.763 0 0 1-1.086.597ZM219.511 214.805a2.911 2.911 0 0 0-.625 1.836 2.995 2.995 0 0 0 1.179 2.377 3.17 3.17 0 0 0 1.521.624v-1.24a1.845 1.845 0 0 1-1.137-.752 1.78 1.78 0 0 1-.16-1.753c.101-.234.252-.442.443-.611a1.94 1.94 0 0 1 .856-.421v-1.242a3.076 3.076 0 0 0-2.077 1.182ZM201.109 218.404v1.242a2.993 2.993 0 0 0 2.072-1.169l-.975-.753a1.803 1.803 0 0 1-1.097.68ZM223.367 217.724a1.796 1.796 0 0 1-1.108.68v1.242a3.007 3.007 0 0 0 2.074-1.169l-.966-.753ZM217.568 213.772h-1.235v5.716h1.235v-5.716ZM205.808 217.87a2.11 2.11 0 0 1-.16-.951v-3.147h-1.239v3.259c-.011.35.036.698.138 1.033.095.285.251.544.456.763.184.205.402.375.645.503.242.134.505.225.778.272v-1.255a1.119 1.119 0 0 1-.618-.477ZM207.897 216.924c.021.329-.037.66-.168.964a1.09 1.09 0 0 1-.623.459v1.255c.274-.044.539-.134.782-.267.242-.133.461-.304.647-.508.207-.218.363-.478.459-.763.1-.335.146-.683.137-1.033v-3.259h-1.234v3.152ZM211.886 213.772h-1.235v5.716h1.235v-5.716Z" fill="#fff"/></svg>
|
||||
|
After Width: | Height: | Size: 2.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 39 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 9.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 39 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 1.9 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 34 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 11 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 28 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 37 KiB |
Binary file not shown.
@@ -0,0 +1,18 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
|
||||
<svg width="100%" height="100%" viewBox="0 0 230 230" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xml:space="preserve" xmlns:serif="http://www.serif.com/" style="fill-rule:evenodd;clip-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2;">
|
||||
<g transform="matrix(1,0,0,1,6.568,-4)">
|
||||
<g transform="matrix(1,0,0,1,-86,0)">
|
||||
<path d="M168.09,210.559L173.745,215.976L177.176,216.309L172.701,212.391L168.09,210.559Z" style="fill:white;fill-opacity:0.9;"/>
|
||||
</g>
|
||||
<g transform="matrix(1,0,0,1,-86,0)">
|
||||
<path d="M173.666,216.029L168.014,210.594L164.531,216.835L168.417,222.608L173.666,216.029ZM168.493,222.622L173.754,216.062L177.197,216.368L173.063,220.971L168.493,222.622Z" style="fill:white;"/>
|
||||
</g>
|
||||
<g transform="matrix(1,0,0,1,-86,0)">
|
||||
<path d="M193.734,213.772L192.223,213.772L193.761,215.939L194.53,214.901L193.734,213.772ZM190.552,216.964L186.723,213.587L186.723,215.218L191.787,219.671L191.787,213.773L190.552,213.773L190.552,216.964ZM196.243,213.772L194.198,216.559L194.198,219.488L195.436,219.488L195.436,216.959L197.772,213.772L196.243,213.772ZM182.253,214.843L183.549,217.332L183.064,217.332L182.448,218.532L184.161,218.532L184.662,219.488L186.045,219.488L182.953,213.51L182.253,214.843ZM186.723,216.124L186.723,219.49L187.957,219.49L187.957,217.204L186.723,216.124Z" style="fill:white;fill-rule:nonzero;"/>
|
||||
</g>
|
||||
<g transform="matrix(1,0,0,1,-86,0)">
|
||||
<path d="M181.881,215.582L179.864,219.488L181.243,219.488L182.568,216.924L181.881,215.582ZM213.778,217.155C213.976,217.106 214.162,217.018 214.326,216.899C214.777,216.574 215.036,216.043 215.013,215.487C215.03,214.948 214.773,214.435 214.33,214.126C214.157,213.998 213.961,213.904 213.752,213.85C213.468,213.79 213.177,213.763 212.887,213.772L212.577,213.772L212.577,214.986L213.02,214.986C213.212,214.971 213.404,215.001 213.581,215.075C213.73,215.158 213.817,215.321 213.803,215.491C213.815,215.689 213.703,215.874 213.523,215.957C213.347,216.019 213.16,216.045 212.974,216.034L212.577,216.034L212.577,217.234L213.02,217.234C213.275,217.239 213.53,217.213 213.778,217.155ZM198.35,214.805C197.938,215.328 197.717,215.976 197.723,216.641C197.725,217.573 198.161,218.452 198.902,219.018C199.345,219.355 199.87,219.57 200.422,219.642L200.422,218.402C199.962,218.305 199.557,218.036 199.288,217.65C198.928,217.136 198.867,216.468 199.128,215.897C199.23,215.664 199.381,215.455 199.571,215.286C199.817,215.077 200.111,214.932 200.427,214.865L200.427,213.623C199.604,213.721 198.855,214.147 198.35,214.805ZM202.202,215.562L203.168,214.796C202.93,214.475 202.629,214.206 202.282,214.008C201.922,213.808 201.526,213.68 201.116,213.631L201.116,214.874C201.552,214.959 201.94,215.205 202.202,215.562ZM223.363,215.562L224.331,214.796C224.093,214.476 223.791,214.207 223.445,214.008C223.085,213.808 222.689,213.68 222.279,213.631L222.279,214.874C222.714,214.96 223.101,215.205 223.363,215.562ZM213.811,217.616C213.82,217.656 213.825,217.697 213.825,217.737C213.846,217.955 213.71,218.159 213.501,218.223C213.332,218.269 213.158,218.29 212.983,218.283L212.586,218.283L212.586,219.483L212.991,219.483C213.257,219.488 213.522,219.465 213.783,219.412C213.978,219.368 214.162,219.287 214.326,219.172C214.778,218.845 215.047,218.32 215.048,217.762C215.05,217.507 214.999,217.253 214.897,217.019C214.619,217.343 214.233,217.555 213.811,217.616ZM219.511,214.805C219.099,215.327 218.878,215.976 218.886,216.641C218.887,217.573 219.324,218.453 220.065,219.018C220.508,219.356 221.033,219.571 221.586,219.642L221.586,218.402C221.125,218.306 220.718,218.036 220.449,217.65C220.091,217.135 220.03,216.468 220.289,215.897C220.39,215.663 220.541,215.455 220.732,215.286C220.978,215.077 221.272,214.932 221.588,214.865L221.588,213.623C220.765,213.721 220.016,214.147 219.511,214.805ZM201.109,218.404L201.109,219.646C201.931,219.559 202.682,219.136 203.181,218.477L202.206,217.724C201.937,218.078 201.546,218.32 201.109,218.404ZM223.367,217.724C223.096,218.081 222.7,218.324 222.259,218.404L222.259,219.646C223.081,219.558 223.832,219.135 224.333,218.477L223.367,217.724ZM217.568,213.772L216.333,213.772L216.333,219.488L217.568,219.488L217.568,213.772ZM205.808,217.87C205.682,217.57 205.627,217.244 205.648,216.919L205.648,213.772L204.409,213.772L204.409,217.031C204.398,217.381 204.445,217.729 204.547,218.064C204.642,218.349 204.798,218.608 205.003,218.827C205.187,219.032 205.405,219.202 205.648,219.33C205.89,219.464 206.153,219.555 206.426,219.602L206.426,218.347C206.169,218.267 205.95,218.098 205.808,217.87ZM207.897,216.924C207.918,217.253 207.86,217.584 207.729,217.888C207.585,218.112 207.363,218.275 207.106,218.347L207.106,219.602C207.38,219.558 207.645,219.468 207.888,219.335C208.13,219.202 208.349,219.031 208.535,218.827C208.742,218.609 208.898,218.349 208.994,218.064C209.094,217.729 209.14,217.381 209.131,217.031L209.131,213.772L207.897,213.772L207.897,216.924ZM211.886,213.772L210.651,213.772L210.651,219.488L211.886,219.488L211.886,213.772Z" style="fill:white;fill-rule:nonzero;"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 5.2 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 14 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 39 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 2.4 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 2.4 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.2 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 2.3 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.6 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 6.3 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.2 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.2 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 4.3 KiB |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 46 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 23 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 40 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 42 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 41 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.4 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.4 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.4 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 14 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.7 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 3.7 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -0,0 +1,876 @@
|
||||
[vendor]
|
||||
repo_id = orcaslicer-fff
|
||||
name = BIQU
|
||||
config_version = 02.03.02.60
|
||||
description = BIQU configurations
|
||||
force_update = 0
|
||||
|
||||
[printer_model:BIQU B1]
|
||||
model_id = B1
|
||||
nozzle_diameter = 0.4
|
||||
machine_tech = FFF
|
||||
family = BIQU
|
||||
bed_model = BIQU_B1_buildplate_model.stl
|
||||
bed_texture = BIQU_B1_buildplate_texture.png
|
||||
hotend_model = biqu_b1_hotend.stl
|
||||
default_materials = Generic PLA @System;Generic PETG @System;Generic ABS @System
|
||||
|
||||
[printer_model:BIQU BX]
|
||||
model_id = BX
|
||||
nozzle_diameter = 0.4
|
||||
machine_tech = FFF
|
||||
family = BIQU
|
||||
bed_model = BIQU_BX_buildplate_model.stl
|
||||
bed_texture = BIQU_BX_buildplate_texture.png
|
||||
hotend_model = biqu_bx_hotend.stl
|
||||
default_materials = Generic PLA @System;Generic PETG @System;Generic ABS @System
|
||||
|
||||
[printer_model:BIQU Hurakan]
|
||||
model_id = Hurakan
|
||||
nozzle_diameter = 0.4
|
||||
machine_tech = FFF
|
||||
family = BIQU
|
||||
bed_model = BIQU_Hurakan_buildplate_model.stl
|
||||
bed_texture = BIQU_Hurakan_buildplate_model.png
|
||||
hotend_model = biqu_hurakan_hotend.stl
|
||||
default_materials = Generic PLA @System;Generic PETG @System;Generic ABS @System
|
||||
|
||||
[printer:fdm_machine_common]
|
||||
from = system
|
||||
instantiation = false
|
||||
printer_technology = FFF
|
||||
deretraction_speed = 40
|
||||
extruder_colour = #FCE94F
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
machine_max_acceleration_e = 5000
|
||||
machine_max_acceleration_extruding = 10000
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_x = 10000
|
||||
machine_max_acceleration_y = 10000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_speed_e = 60
|
||||
machine_max_speed_x = 500
|
||||
machine_max_speed_y = 500
|
||||
machine_max_speed_z = 10
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
printable_height = 250
|
||||
extruder_clearance_radius = 65
|
||||
extruder_clearance_height_to_rod = 36
|
||||
extruder_clearance_height_to_lid = 140
|
||||
nozzle_diameter = 0.4
|
||||
printer_settings_id =
|
||||
printer_variant = 0.4
|
||||
retraction_minimum_travel = 2
|
||||
retract_before_wipe = 70%
|
||||
retract_when_changing_layer = 1
|
||||
retraction_length = 1
|
||||
retract_length_toolchange = 1
|
||||
z_hop = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retraction_speed = 60
|
||||
single_extruder_multi_material = 1
|
||||
change_filament_gcode =
|
||||
wipe = 1
|
||||
z_lift_type = NormalLift
|
||||
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
|
||||
;[layer_z]
|
||||
G92 E0
|
||||
|
||||
machine_start_gcode = G0 Z20 F9000
|
||||
G92 E0; G1 E-10 F1200
|
||||
G28
|
||||
M970 Q1 A10 B10 C130 K0
|
||||
M970 Q1 A10 B131 C250 K1
|
||||
M974 Q1 S1 P0
|
||||
M970 Q0 A10 B10 C130 H20 K0
|
||||
M970 Q0 A10 B131 C250 K1
|
||||
M974 Q0 S1 P0
|
||||
M220 S100 ;Reset Feedrate
|
||||
M221 S100 ;Reset Flowrate
|
||||
G29 ;Home
|
||||
G90;
|
||||
G92 E0 ;Reset Extruder
|
||||
G1 Z2.0 F3000 ;Move Z Axis up
|
||||
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
|
||||
M109 S205;
|
||||
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
|
||||
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
|
||||
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
|
||||
G92 E0 ;Reset Extruder
|
||||
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
|
||||
machine_end_gcode = M400 ; wait for buffer to clear
|
||||
G92 E0 ; zero the extruder
|
||||
G1 E-4.0 F3600; retract
|
||||
G91
|
||||
G1 Z3;
|
||||
M104 S0 ; turn off hotend
|
||||
M140 S0 ; turn off bed
|
||||
M106 S0 ; turn off fan
|
||||
G90
|
||||
G0 X110 Y200 F3600
|
||||
print_end
|
||||
|
||||
[printer:fdm_biqu_common]
|
||||
inherits = fdm_machine_common
|
||||
from = system
|
||||
instantiation = false
|
||||
gcode_flavor = marlin
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 500,500
|
||||
machine_max_acceleration_retracting = 1000,1000
|
||||
machine_max_acceleration_travel = 500,500
|
||||
machine_max_acceleration_x = 3000,3000
|
||||
machine_max_acceleration_y = 3000,3000
|
||||
machine_max_acceleration_z = 500,500
|
||||
machine_max_speed_e = 60,60
|
||||
machine_max_speed_x = 500,500
|
||||
machine_max_speed_y = 500,500
|
||||
machine_max_speed_z = 10,10
|
||||
machine_max_jerk_e = 5,5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
printable_height = 250
|
||||
extruder_clearance_radius = 47
|
||||
extruder_clearance_height_to_rod = 34
|
||||
extruder_clearance_height_to_lid = 34
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant = 0.4
|
||||
retraction_minimum_travel = 2
|
||||
retract_before_wipe = 70%
|
||||
retract_when_changing_layer = 1
|
||||
retraction_length = 5
|
||||
retract_length_toolchange = 2
|
||||
z_hop = 0.4
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retraction_speed = 60
|
||||
deretraction_speed = 40
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 1
|
||||
change_filament_gcode =
|
||||
machine_pause_gcode = M25 ;pause print
|
||||
wipe = 1
|
||||
default_filament_profile = Generic PLA @System
|
||||
bed_exclude_area = 0x0
|
||||
machine_start_gcode = G90 ; use absolute coordinates
|
||||
M83 ; extruder relative mode
|
||||
M140 S[bed_temperature_initial_layer] ; set final bed temp
|
||||
M104 S150 ; set temporary nozzle temp to prevent oozing during homing
|
||||
G4 S10 ; allow partial nozzle warmup
|
||||
G28 ; home all axis
|
||||
G1 Z50 F240
|
||||
G1 X2 Y10 F3000
|
||||
M104 S[nozzle_temperature_initial_layer] ; set final nozzle temp
|
||||
M190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize
|
||||
M109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize
|
||||
G1 Z0.28 F240
|
||||
G92 E0
|
||||
G1 Y140 E10 F1500 ; prime the nozzle
|
||||
G1 X2.3 F5000
|
||||
G92 E0
|
||||
G1 Y10 E10 F1200 ; prime the nozzle
|
||||
G92 E0
|
||||
machine_end_gcode = {if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}
|
||||
G1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print
|
||||
{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}
|
||||
{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}
|
||||
M140 S0 ; turn off heatbed
|
||||
M104 S0 ; turn off temperature
|
||||
M107 ; turn off fan
|
||||
M84 X Y E ; disable motors
|
||||
layer_change_gcode =
|
||||
scan_first_layer = 0
|
||||
nozzle_type = undefine
|
||||
auxiliary_fan = 0
|
||||
|
||||
[printer:fdm_klipper_common]
|
||||
inherits = fdm_machine_common
|
||||
from = system
|
||||
instantiation = false
|
||||
gcode_flavor = klipper
|
||||
use_firmware_retraction = 0
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 500,500
|
||||
machine_max_acceleration_retracting = 1000,1000
|
||||
machine_max_acceleration_travel = 1500,1250
|
||||
machine_max_acceleration_x = 500,500
|
||||
machine_max_acceleration_y = 500,500
|
||||
machine_max_acceleration_z = 500,500
|
||||
machine_max_speed_e = 60,60
|
||||
machine_max_speed_x = 500,500
|
||||
machine_max_speed_y = 500,500
|
||||
machine_max_speed_z = 10,10
|
||||
machine_max_jerk_e = 5,5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
extruder_clearance_radius = 50
|
||||
extruder_clearance_height_to_rod = 60
|
||||
extruder_clearance_height_to_lid = 350
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant = 0.4
|
||||
retraction_minimum_travel = 1
|
||||
retract_before_wipe = 70%
|
||||
retract_when_changing_layer = 1
|
||||
retraction_length = 5
|
||||
retract_length_toolchange = 1
|
||||
z_hop = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retraction_speed = 60
|
||||
deretraction_speed = 40
|
||||
z_hop_types = Normal Lift
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 1
|
||||
change_filament_gcode =
|
||||
machine_pause_gcode = PAUSE
|
||||
|
||||
wipe = 1
|
||||
default_filament_profile = Generic PLA @System
|
||||
bed_exclude_area = 0x0
|
||||
machine_start_gcode = START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
|
||||
|
||||
machine_end_gcode = END_PRINT
|
||||
layer_change_gcode = ;AFTER_LAYER_CHANGE
|
||||
;[layer_z]
|
||||
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
|
||||
;[layer_z]
|
||||
G92 E0
|
||||
|
||||
scan_first_layer = 0
|
||||
nozzle_type = undefine
|
||||
auxiliary_fan = 0
|
||||
|
||||
[printer:BIQU B1 (0.4 nozzle)]
|
||||
inherits = fdm_biqu_common
|
||||
from = system
|
||||
setting_id = GM001
|
||||
instantiation = true
|
||||
printer_model = BIQU B1
|
||||
default_print_profile = 0.20mm Standard @BIQU B1 (0.4 nozzle)
|
||||
nozzle_diameter = 0.4
|
||||
printable_area = 0x0,235x0,235x235,0x235
|
||||
printable_height = 270
|
||||
nozzle_type = undefine
|
||||
auxiliary_fan = 0
|
||||
deretraction_speed = 70
|
||||
gcode_flavor = marlin
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1000
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_x = 1000
|
||||
machine_max_acceleration_y = 1000
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_speed_e = 60
|
||||
machine_max_speed_x = 500
|
||||
machine_max_speed_y = 500
|
||||
machine_max_speed_z = 10
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.3
|
||||
machine_max_junction_deviation = 0.08,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.10
|
||||
printer_variant = 0.4
|
||||
retraction_minimum_travel = 1.5
|
||||
retraction_length = 7
|
||||
retraction_speed = 70
|
||||
machine_start_gcode = ; BIQU B1 Start G-code
|
||||
M117 Getting the bed up to temp!
|
||||
M140 S[first_layer_bed_temperature]; Set Heat Bed temperature
|
||||
M190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature
|
||||
M117 Getting the extruder up to temp!
|
||||
M104 S[first_layer_temperature]; Set Extruder temperature
|
||||
G92 E0; Reset Extruder
|
||||
M117 Homing axes
|
||||
G28; Home all axes
|
||||
M109 S[first_layer_temperature]; Wait for Extruder temperature
|
||||
G1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed
|
||||
G1 X4.1 Y20 Z0.3 F5000.0; Move to start position
|
||||
M117 Purging
|
||||
G1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line
|
||||
G1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little
|
||||
G1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line
|
||||
G92 E0; Reset Extruder
|
||||
M117 Lets make
|
||||
G1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed
|
||||
G1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish
|
||||
machine_end_gcode = ;BIQU B1 Default End Gcode
|
||||
G91;Relative positioning
|
||||
G1 E-2 F2700;Retract a bit
|
||||
G1 E-2 Z0.2 F2400;Retract a bit more and raise Z
|
||||
G1 X5 Y5 F3000;Wipe out
|
||||
G1 Z10;Raise Z by 10mm
|
||||
G90;Return to absolute positioning
|
||||
G1 X0 Y{print_bed_max[1]};
|
||||
M106 S0;Turn-off fan
|
||||
M104 S0;Turn-off hotend
|
||||
M140 S0;Turn-off bed
|
||||
M84 X Y E;Disable all steppers but Z
|
||||
|
||||
[printer:BIQU BX (0.4 nozzle)]
|
||||
inherits = fdm_biqu_common
|
||||
from = system
|
||||
setting_id = GM001
|
||||
instantiation = true
|
||||
printer_model = BIQU BX
|
||||
default_print_profile = 0.20mm Standard @BIQU BX (0.4 nozzle)
|
||||
nozzle_diameter = 0.4
|
||||
printable_area = 0x0,250x0,250x250,0x250
|
||||
printable_height = 250
|
||||
nozzle_type = undefine
|
||||
auxiliary_fan = 0
|
||||
deretraction_speed = 70
|
||||
gcode_flavor = marlin
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1000
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_x = 1000
|
||||
machine_max_acceleration_y = 1000
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_speed_e = 60
|
||||
machine_max_speed_x = 500
|
||||
machine_max_speed_y = 500
|
||||
machine_max_speed_z = 10
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.3
|
||||
machine_max_junction_deviation = 0.04,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.10
|
||||
printer_variant = 0.4
|
||||
retraction_minimum_travel = 1.5
|
||||
retraction_length = 1
|
||||
retraction_speed = 40
|
||||
machine_start_gcode = ; BIQU BX Start G-code
|
||||
;M117 Initial homing sequence; Home so that the probe is positioned to heat
|
||||
G28
|
||||
M117 Probe heating position
|
||||
G0 X65 Y5 Z1; Move the probe to the heating position.
|
||||
M117 Getting the heaters up to temp!
|
||||
M104 S140; Set Extruder temperature, no wait
|
||||
M140 S60; Set Heat Bed temperature
|
||||
M190 S60; Wait for Heat Bed temperature
|
||||
M117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.
|
||||
G4 S90
|
||||
M117 Post warming re-home
|
||||
G28; Home all axes again after warming
|
||||
M117 Z-Dance of my people
|
||||
G34
|
||||
M117 ABL Probing
|
||||
G29
|
||||
M900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament
|
||||
M900 T0 S0
|
||||
G1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed
|
||||
G1 X4.1 Y10 Z0.3 F5000.0; Move to start position
|
||||
M117 Getting the extruder up to temp
|
||||
M140 S[first_layer_bed_temperature]; Set Heat Bed temperature
|
||||
M104 S[first_layer_temperature]; Set Extruder temperature
|
||||
M109 S[first_layer_temperature]; Wait for Extruder temperature
|
||||
M190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature
|
||||
G92 E0; Reset Extruder
|
||||
M117 Purging
|
||||
G1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line
|
||||
G1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little
|
||||
G1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line
|
||||
G92 E0; Reset Extruder
|
||||
M117 Lets make
|
||||
G1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish
|
||||
machine_end_gcode = ; BIQU BX Default End Gcode
|
||||
G91;Relative positioning
|
||||
G1 E-2 F2700;Retract a bit
|
||||
G1 E-2 Z0.2 F2400;Retract a bit more and raise Z
|
||||
G1 X5 Y5 F3000;Wipe out
|
||||
G1 Z10;Raise Z by 10mm
|
||||
G90;Return to absolute positioning
|
||||
G1 X0 Y{print_bed_max[1]};TaDaaaa
|
||||
M106 S0;Turn-off fan
|
||||
M104 S0;Turn-off hotend
|
||||
M140 S0;Turn-off bed
|
||||
M84 X Y E;Disable all steppers but Z
|
||||
|
||||
[printer:BIQU Hurakan (0.4 nozzle)]
|
||||
inherits = fdm_klipper_common
|
||||
from = system
|
||||
setting_id = GM001
|
||||
instantiation = true
|
||||
printer_model = BIQU Hurakan
|
||||
default_print_profile = 0.20mm Standard @BIQU Hurakan (0.4 nozzle)
|
||||
nozzle_diameter = 0.4
|
||||
printable_area = 0x0,220x0,220x220,0x220
|
||||
printable_height = 270
|
||||
nozzle_type = undefine
|
||||
auxiliary_fan = 0
|
||||
machine_max_acceleration_e = 10000,10000
|
||||
machine_max_acceleration_extruding = 3000,3000
|
||||
machine_max_acceleration_retracting = 5000,5000
|
||||
machine_max_acceleration_travel = 3000,3000
|
||||
machine_max_acceleration_x = 3000,3000
|
||||
machine_max_acceleration_y = 3000,3000
|
||||
machine_max_acceleration_z = 500,500
|
||||
machine_max_speed_e = 60,60
|
||||
machine_max_speed_x = 180,180
|
||||
machine_max_speed_y = 180,180
|
||||
machine_max_speed_z = 15,15
|
||||
machine_max_jerk_e = 5,5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_max_junction_deviation = 0.08,0
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
extruder_clearance_radius = 50
|
||||
extruder_clearance_height_to_rod = 60
|
||||
extruder_clearance_height_to_lid = 350
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant = 0.4
|
||||
retraction_minimum_travel = 1
|
||||
retract_before_wipe = 70%
|
||||
retract_when_changing_layer = 1
|
||||
retraction_length = 4.5
|
||||
retract_length_toolchange = 1
|
||||
z_hop = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retraction_speed = 40
|
||||
deretraction_speed = 40
|
||||
z_hop_types = Normal Lift
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 1
|
||||
change_filament_gcode =
|
||||
machine_pause_gcode = PAUSE
|
||||
|
||||
wipe = 1
|
||||
default_filament_profile = Generic PLA @System
|
||||
bed_exclude_area = 0x0
|
||||
machine_start_gcode = START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
|
||||
|
||||
machine_end_gcode = END_PRINT
|
||||
layer_change_gcode = ;AFTER_LAYER_CHANGE
|
||||
;[layer_z]
|
||||
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
|
||||
;[layer_z]
|
||||
G92 E0
|
||||
|
||||
scan_first_layer = 0
|
||||
|
||||
[print:fdm_process_common]
|
||||
from = system
|
||||
instantiation = false
|
||||
adaptive_layer_height = 0
|
||||
reduce_crossing_wall = 0
|
||||
bridge_flow = 0.95
|
||||
bridge_speed = 25
|
||||
brim_width = 5
|
||||
compatible_printers =
|
||||
print_sequence = by layer
|
||||
default_acceleration = 10000
|
||||
bridge_no_support = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
outer_wall_line_width = 0.4
|
||||
outer_wall_speed = 120
|
||||
line_width = 0.45
|
||||
infill_direction = 45
|
||||
sparse_infill_density = 15%
|
||||
sparse_infill_pattern = crosshatch
|
||||
initial_layer_line_width = 0.42
|
||||
initial_layer_print_height = 0.2
|
||||
initial_layer_speed = 20
|
||||
gap_infill_speed = 30
|
||||
infill_combination = 0
|
||||
sparse_infill_line_width = 0.45
|
||||
infill_wall_overlap = 25%
|
||||
sparse_infill_speed = 50
|
||||
interface_shells = 0
|
||||
detect_overhang_wall = 0
|
||||
reduce_infill_retraction = 0
|
||||
filename_format = {input_filename_base}.gcode
|
||||
wall_loops = 3
|
||||
inner_wall_line_width = 0.45
|
||||
inner_wall_speed = 40
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = nearest
|
||||
skirt_distance = 2
|
||||
skirt_height = 2
|
||||
minimum_sparse_infill_area = 0
|
||||
internal_solid_infill_line_width = 0.45
|
||||
internal_solid_infill_speed = 40
|
||||
spiral_mode = 0
|
||||
standby_temperature_delta = -5
|
||||
enable_support = 0
|
||||
support_filament = 0
|
||||
support_line_width = 0.42
|
||||
support_interface_filament = 0
|
||||
support_on_build_plate_only = 0
|
||||
support_top_z_distance = 0.15
|
||||
support_interface_loop_pattern = 0
|
||||
support_interface_top_layers = 2
|
||||
support_interface_spacing = 0
|
||||
support_interface_speed = 80
|
||||
support_base_pattern = rectilinear
|
||||
support_base_pattern_spacing = 2
|
||||
support_speed = 40
|
||||
support_threshold_angle = 30
|
||||
support_object_xy_distance = 0.5
|
||||
detect_thin_wall = 0
|
||||
top_surface_line_width = 0.4
|
||||
top_surface_speed = 30
|
||||
travel_speed = 400
|
||||
enable_prime_tower = 1
|
||||
prime_tower_width = 60
|
||||
xy_hole_compensation = 0
|
||||
xy_contour_compensation = 0
|
||||
|
||||
[print:fdm_process_biqu_common]
|
||||
inherits = fdm_process_common
|
||||
from = system
|
||||
instantiation = false
|
||||
adaptive_layer_height = 0
|
||||
reduce_crossing_wall = 0
|
||||
max_travel_detour_distance = 0
|
||||
bottom_surface_pattern = monotonic
|
||||
bottom_shell_layers = 3
|
||||
bottom_shell_thickness = 0
|
||||
bridge_flow = 0.95
|
||||
bridge_speed = 25
|
||||
brim_width = 5
|
||||
brim_object_gap = 0.1
|
||||
compatible_printers_condition =
|
||||
print_sequence = by layer
|
||||
default_acceleration = 500
|
||||
top_surface_acceleration = 500
|
||||
bridge_no_support = 0
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0
|
||||
enable_arc_fitting = 0
|
||||
outer_wall_line_width = 0.4
|
||||
wall_infill_order = inner wall/outer wall/infill
|
||||
line_width = 0.4
|
||||
infill_direction = 45
|
||||
sparse_infill_density = 15%
|
||||
sparse_infill_pattern = crosshatch
|
||||
initial_layer_acceleration = 500
|
||||
travel_acceleration = 700
|
||||
inner_wall_acceleration = 500
|
||||
initial_layer_line_width = 0.5
|
||||
initial_layer_print_height = 0.2
|
||||
infill_combination = 0
|
||||
sparse_infill_line_width = 0.45
|
||||
infill_wall_overlap = 23%
|
||||
interface_shells = 0
|
||||
ironing_flow = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = no ironing
|
||||
layer_height = 0.2
|
||||
reduce_infill_retraction = 1
|
||||
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
|
||||
detect_overhang_wall = 1
|
||||
overhang_1_4_speed = 0
|
||||
overhang_2_4_speed = 20
|
||||
overhang_3_4_speed = 15
|
||||
overhang_4_4_speed = 10
|
||||
inner_wall_line_width = 0.45
|
||||
wall_loops = 3
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = aligned
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
skirt_loops = 1
|
||||
minimum_sparse_infill_area = 15
|
||||
internal_solid_infill_line_width = 0.4
|
||||
spiral_mode = 0
|
||||
standby_temperature_delta = -5
|
||||
enable_support = 0
|
||||
resolution = 0.012
|
||||
support_type = normal(auto)
|
||||
support_style = default
|
||||
support_on_build_plate_only = 0
|
||||
support_top_z_distance = 0.2
|
||||
support_filament = 0
|
||||
support_line_width = 0.4
|
||||
support_interface_loop_pattern = 0
|
||||
support_interface_filament = 0
|
||||
support_interface_top_layers = 2
|
||||
support_interface_bottom_layers = 2
|
||||
support_interface_spacing = 0.5
|
||||
support_interface_speed = 80
|
||||
support_base_pattern = rectilinear
|
||||
support_base_pattern_spacing = 2.5
|
||||
support_speed = 150
|
||||
support_threshold_angle = 30
|
||||
support_object_xy_distance = 0.35
|
||||
tree_support_branch_angle = 45
|
||||
tree_support_wall_count = 0
|
||||
detect_thin_wall = 0
|
||||
top_surface_pattern = monotonicline
|
||||
top_surface_line_width = 0.4
|
||||
top_shell_layers = 3
|
||||
top_shell_thickness = 0.8
|
||||
initial_layer_speed = 15
|
||||
initial_layer_infill_speed = 20
|
||||
outer_wall_speed = 25
|
||||
inner_wall_speed = 40
|
||||
internal_solid_infill_speed = 40
|
||||
top_surface_speed = 30
|
||||
gap_infill_speed = 30
|
||||
sparse_infill_speed = 50
|
||||
travel_speed = 150
|
||||
enable_prime_tower = 1
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
prime_tower_width = 60
|
||||
xy_hole_compensation = 0
|
||||
xy_contour_compensation = 0
|
||||
|
||||
[print:0.12mm Fine @BIQU B1 (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.12
|
||||
bottom_shell_layers = 5
|
||||
top_shell_layers = 6
|
||||
compatible_printers = BIQU B1 (0.4 nozzle)
|
||||
|
||||
[print:0.12mm Fine @BIQU BX (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.12
|
||||
bottom_shell_layers = 5
|
||||
top_shell_layers = 6
|
||||
compatible_printers = BIQU BX (0.4 nozzle)
|
||||
|
||||
[print:0.12mm Fine @BIQU Hurakan (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.12
|
||||
bottom_shell_layers = 5
|
||||
top_shell_layers = 6
|
||||
compatible_printers = BIQU Hurakan (0.4 nozzle)
|
||||
|
||||
[print:0.15mm Optimal @BIQU B1 (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
bottom_shell_layers = 4
|
||||
top_shell_layers = 5
|
||||
layer_height = 0.15
|
||||
compatible_printers = BIQU B1 (0.4 nozzle)
|
||||
|
||||
[print:0.15mm Optimal @BIQU BX (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
bottom_shell_layers = 4
|
||||
top_shell_layers = 5
|
||||
layer_height = 0.15
|
||||
compatible_printers = BIQU BX (0.4 nozzle)
|
||||
|
||||
[print:0.20mm Standard @BIQU B1 (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.2
|
||||
bottom_shell_layers = 3
|
||||
top_shell_layers = 4
|
||||
compatible_printers = BIQU B1 (0.4 nozzle)
|
||||
|
||||
[print:0.20mm Standard @BIQU BX (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.2
|
||||
bottom_shell_layers = 3
|
||||
top_shell_layers = 4
|
||||
compatible_printers = BIQU BX (0.4 nozzle)
|
||||
|
||||
[print:0.24mm Draft @BIQU B1 (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.24
|
||||
top_surface_line_width = 0.45
|
||||
bottom_shell_layers = 3
|
||||
top_shell_layers = 4
|
||||
compatible_printers = BIQU B1 (0.4 nozzle)
|
||||
|
||||
[print:0.24mm Draft @BIQU BX (0.4 nozzle)]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.24
|
||||
top_surface_line_width = 0.45
|
||||
bottom_shell_layers = 3
|
||||
top_shell_layers = 4
|
||||
compatible_printers = BIQU BX (0.4 nozzle)
|
||||
|
||||
[print:fdm_process_hurakan_common]
|
||||
inherits = fdm_process_biqu_common
|
||||
from = system
|
||||
instantiation = false
|
||||
adaptive_layer_height = 0
|
||||
reduce_crossing_wall = 0
|
||||
max_travel_detour_distance = 0
|
||||
bottom_surface_pattern = monotonic
|
||||
bottom_shell_layers = 3
|
||||
bottom_shell_thickness = 0
|
||||
bridge_flow = 0.95
|
||||
bridge_speed = 25
|
||||
brim_width = 5
|
||||
brim_object_gap = 0.1
|
||||
compatible_printers_condition =
|
||||
print_sequence = by layer
|
||||
default_acceleration = 500
|
||||
top_surface_acceleration = 500
|
||||
bridge_no_support = 0
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0
|
||||
enable_arc_fitting = 0
|
||||
outer_wall_line_width = 0.4
|
||||
wall_infill_order = inner wall/outer wall/infill
|
||||
line_width = 0.4
|
||||
infill_direction = 45
|
||||
sparse_infill_density = 15%
|
||||
sparse_infill_pattern = crosshatch
|
||||
initial_layer_acceleration = 500
|
||||
travel_acceleration = 700
|
||||
inner_wall_acceleration = 500
|
||||
initial_layer_line_width = 0.5
|
||||
initial_layer_print_height = 0.2
|
||||
infill_combination = 0
|
||||
sparse_infill_line_width = 0.45
|
||||
infill_wall_overlap = 23%
|
||||
interface_shells = 0
|
||||
ironing_flow = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = no ironing
|
||||
layer_height = 0.2
|
||||
reduce_infill_retraction = 1
|
||||
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
|
||||
detect_overhang_wall = 1
|
||||
overhang_1_4_speed = 0
|
||||
overhang_2_4_speed = 20
|
||||
overhang_3_4_speed = 15
|
||||
overhang_4_4_speed = 10
|
||||
inner_wall_line_width = 0.45
|
||||
wall_loops = 3
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = aligned
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
skirt_loops = 1
|
||||
minimum_sparse_infill_area = 15
|
||||
internal_solid_infill_line_width = 0.4
|
||||
spiral_mode = 0
|
||||
standby_temperature_delta = -5
|
||||
enable_support = 0
|
||||
resolution = 0.012
|
||||
support_type = normal(auto)
|
||||
support_style = default
|
||||
support_on_build_plate_only = 0
|
||||
support_top_z_distance = 0.2
|
||||
support_filament = 0
|
||||
support_line_width = 0.4
|
||||
support_interface_loop_pattern = 0
|
||||
support_interface_filament = 0
|
||||
support_interface_top_layers = 2
|
||||
support_interface_bottom_layers = 2
|
||||
support_interface_spacing = 0.5
|
||||
support_interface_speed = 80
|
||||
support_base_pattern = rectilinear
|
||||
support_base_pattern_spacing = 2.5
|
||||
support_speed = 150
|
||||
support_threshold_angle = 30
|
||||
support_object_xy_distance = 0.35
|
||||
tree_support_branch_angle = 45
|
||||
tree_support_wall_count = 0
|
||||
detect_thin_wall = 0
|
||||
top_surface_pattern = monotonicline
|
||||
top_surface_line_width = 0.4
|
||||
top_shell_layers = 3
|
||||
top_shell_thickness = 0.8
|
||||
initial_layer_speed = 15
|
||||
initial_layer_infill_speed = 20
|
||||
outer_wall_speed = 25
|
||||
inner_wall_speed = 40
|
||||
internal_solid_infill_speed = 40
|
||||
top_surface_speed = 30
|
||||
gap_infill_speed = 30
|
||||
sparse_infill_speed = 50
|
||||
travel_speed = 150
|
||||
enable_prime_tower = 1
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
prime_tower_width = 60
|
||||
xy_hole_compensation = 0
|
||||
xy_contour_compensation = 0
|
||||
|
||||
[print:0.15mm Optimal @BIQU Hurakan (0.4 nozzle)]
|
||||
inherits = fdm_process_hurakan_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
bottom_shell_layers = 4
|
||||
top_shell_layers = 5
|
||||
layer_height = 0.15
|
||||
compatible_printers = BIQU Hurakan (0.4 nozzle)
|
||||
|
||||
[print:0.20mm Standard @BIQU Hurakan (0.4 nozzle)]
|
||||
inherits = fdm_process_hurakan_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.2
|
||||
bottom_shell_layers = 3
|
||||
top_shell_layers = 4
|
||||
compatible_printers = BIQU Hurakan (0.4 nozzle)
|
||||
|
||||
[print:0.24mm Draft @BIQU Hurakan (0.4 nozzle)]
|
||||
inherits = fdm_process_hurakan_common
|
||||
from = system
|
||||
setting_id = GP004
|
||||
instantiation = true
|
||||
layer_height = 0.24
|
||||
top_surface_line_width = 0.45
|
||||
bottom_shell_layers = 3
|
||||
top_shell_layers = 4
|
||||
compatible_printers = BIQU Hurakan (0.4 nozzle)
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 33 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 15 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 15 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 23 KiB |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 15 KiB |
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user