Add EasyThreeD K10 PLA/TPU Profiles

profile_sources/non-prusa-fff/EasyThreeD/printer/EasyThreeD K10.ini

@@ -0,0 +1,6 @@
+[printer:EasyThreeD K10]
+inherits = *common*; *0.4nozzle*
+bed_shape = 0x0,100x0,100x100,0x100
+max_print_height = 100
+printer_model = K10
+

profile_sources/non-prusa-fff/EasyThreeD/printer/_0.4nozzle_.ini

@@ -0,0 +1,6 @@
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.32
+min_layer_height = 0.08
+printer_variant = 0.4
+

profile_sources/non-prusa-fff/EasyThreeD/printer/_common_.ini

@@ -0,0 +1,58 @@
+[printer:*common*]
+bed_custom_model = 
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
+between_objects_gcode = 
+default_filament_profile = "Generic PLA @EasyThreeD"
+default_print_profile = "0.20mm NORMAL @EasyThreeD"
+deretract_speed = 35
+end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG91 ;\nG1 Z+5 F3000\nG28 X0 Y0 ; park print head\nM84 ; disable motors\nG90 ;
+extra_loading_move = -2
+extruder_colour = "#FCE94F"
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 5000, 5000
+machine_max_acceleration_extruding = 10000, 10000
+machine_max_acceleration_retracting = 1000, 1000
+machine_max_acceleration_travel = 0, 0
+machine_max_acceleration_x = 10000, 10000
+machine_max_acceleration_y = 10000, 10000
+machine_max_acceleration_z = 500, 500
+machine_max_feedrate_e = 60, 60
+machine_max_feedrate_x = 500, 500
+machine_max_feedrate_y = 500, 500
+machine_max_feedrate_z = 10, 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0, 0
+machine_min_travel_rate = 0, 0
+pause_print_gcode = M601
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_EASYTHREED\nPRINTER_MODEL_K10\n
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 70%
+retract_layer_change = 1
+retract_length = 0.9
+retract_length_toolchange = 1
+retract_lift = 0.2
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 45
+silent_mode = 0
+single_extruder_multi_material = 1
+start_gcode = G21 ;\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\nG28 X0 Y0 ; home\nG28 Z0 ; home\nG1  Z5 F1000 ; move print head up
+thumbnails = 48x48,300x300
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+extruder_clearance_height = 36
+extruder_clearance_radius = 65