mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-02 16:59:08 +00:00
Add EasyThreeD K10 PLA/TPU Profiles
This commit is contained in:
Dark98
@@ -0,0 +1,268 @@
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
name = EasyThreeD
|
||||
config_version = 1.0.0
|
||||
config_update_url = https://raw.githubusercontent.com/Santoku-Slicer/Profiles/refs/heads/main/repos/non-prusa-fff/EasyThreeD/
|
||||
|
||||
[printer_model:K10]
|
||||
name = EasyThreeD K10
|
||||
family = K
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
default_materials = Generic PLA @EasyThreeD; Generic TPU @EasyThreeD
|
||||
|
||||
[print:*common*]
|
||||
compatible_printers_condition = printer_model=="K10" and nozzle_diameter[0]==0.4
|
||||
allow_empty_layers = 0
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 50%
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 4
|
||||
bridge_acceleration = 0
|
||||
bridge_speed = 20
|
||||
brim_width = 2
|
||||
complete_objects = 0
|
||||
default_acceleration = 100
|
||||
dont_support_bridges = 1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 40
|
||||
extrusion_width = 0.45
|
||||
fill_density = 15%
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 100
|
||||
first_layer_extrusion_width = 0.48
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 15
|
||||
gap_fill = 1
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
infill_acceleration = 100
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 5
|
||||
infill_extrusion_width = 0.45
|
||||
infill_overlap = 20%
|
||||
infill_speed = 40
|
||||
layer_height = 0.2
|
||||
max_print_speed = 40
|
||||
max_volumetric_speed = 3.5
|
||||
min_skirt_length = 4
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
perimeter_acceleration = 100
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 40
|
||||
perimeters = 2
|
||||
raft_layers = 3
|
||||
seam_position = rear
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 2
|
||||
small_perimeter_speed = 12
|
||||
solid_fill_pattern = rectilinear
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 40
|
||||
support_material = 1
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance_bottom = 0.2
|
||||
support_material_contact_distance_top = 0.2
|
||||
support_material_interface_layers = 2
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 40
|
||||
support_material_threshold = 45
|
||||
support_material_xy_spacing = 70%
|
||||
thin_walls = 0
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.42
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
travel_speed = 40
|
||||
travel_speed_z = 0
|
||||
wipe_tower = 0
|
||||
elefant_foot_compensation = 0.15
|
||||
|
||||
[print:*0.10mm*]
|
||||
layer_height = 0.1
|
||||
|
||||
[print:*0.20mm*]
|
||||
layer_height = 0.2
|
||||
|
||||
[print:*0.28mm*]
|
||||
layer_height = 0.28
|
||||
|
||||
[print:0.10mm DETAIL @EasyThreeD]
|
||||
inherits = *common*; *0.10mm*
|
||||
external_perimeter_speed = 18
|
||||
infill_speed = 25
|
||||
perimeter_speed = 24
|
||||
top_solid_infill_speed = 20
|
||||
travel_speed = 70
|
||||
compatible_printers_condition = printer_model=="K10" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.20mm NORMAL @EasyThreeD]
|
||||
inherits = *common*; *0.20mm*
|
||||
default_acceleration = 100
|
||||
first_layer_acceleration = 100
|
||||
first_layer_speed = 15
|
||||
infill_acceleration = 100
|
||||
infill_speed = 40
|
||||
perimeter_acceleration = 100
|
||||
perimeter_speed = 40
|
||||
raft_layers = 3
|
||||
solid_infill_speed = 40
|
||||
support_material = 1
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 40
|
||||
travel_speed = 40
|
||||
compatible_printers_condition = printer_model=="K10" and nozzle_diameter[0]==0.4
|
||||
|
||||
[print:0.28mm DRAFT @EasyThreeD]
|
||||
inherits = *common*; *0.28mm*
|
||||
external_perimeter_speed = 22
|
||||
infill_speed = 40
|
||||
perimeter_speed = 35
|
||||
top_solid_infill_speed = 28
|
||||
travel_speed = 90
|
||||
compatible_printers_condition = printer_model=="K10" and nozzle_diameter[0]==0.4
|
||||
|
||||
[printer:*common*]
|
||||
bed_custom_model =
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
|
||||
between_objects_gcode =
|
||||
default_filament_profile = "Generic PLA @EasyThreeD"
|
||||
default_print_profile = "0.20mm NORMAL @EasyThreeD"
|
||||
deretract_speed = 35
|
||||
end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG91 ;\nG1 Z+5 F3000\nG28 X0 Y0 ; park print head\nM84 ; disable motors\nG90 ;
|
||||
extra_loading_move = -2
|
||||
extruder_colour = "#FCE94F"
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
|
||||
machine_limits_usage = emit_to_gcode
|
||||
machine_max_acceleration_e = 5000, 5000
|
||||
machine_max_acceleration_extruding = 10000, 10000
|
||||
machine_max_acceleration_retracting = 1000, 1000
|
||||
machine_max_acceleration_travel = 0, 0
|
||||
machine_max_acceleration_x = 10000, 10000
|
||||
machine_max_acceleration_y = 10000, 10000
|
||||
machine_max_acceleration_z = 500, 500
|
||||
machine_max_feedrate_e = 60, 60
|
||||
machine_max_feedrate_x = 500, 500
|
||||
machine_max_feedrate_y = 500, 500
|
||||
machine_max_feedrate_z = 10, 10
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0, 0
|
||||
machine_min_travel_rate = 0, 0
|
||||
pause_print_gcode = M601
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_EASYTHREED\nPRINTER_MODEL_K10\n
|
||||
remaining_times = 1
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 70%
|
||||
retract_layer_change = 1
|
||||
retract_length = 0.9
|
||||
retract_length_toolchange = 1
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 45
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 1
|
||||
start_gcode = G21 ;\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\nG28 X0 Y0 ; home\nG28 Z0 ; home\nG1 Z5 F1000 ; move print head up
|
||||
thumbnails = 48x48,300x300
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
extruder_clearance_height = 36
|
||||
extruder_clearance_radius = 65
|
||||
|
||||
[printer:*0.4nozzle*]
|
||||
nozzle_diameter = 0.4
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
printer_variant = 0.4
|
||||
|
||||
[printer:EasyThreeD K10]
|
||||
inherits = *common*; *0.4nozzle*
|
||||
bed_shape = 0x0,100x0,100x100,0x100
|
||||
max_print_height = 100
|
||||
printer_model = K10
|
||||
|
||||
[filament:*common*]
|
||||
bed_temperature = 0
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 30
|
||||
filament_cost = 20
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 20
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 60
|
||||
filament_unloading_speed_start = 80
|
||||
first_layer_bed_temperature = 0
|
||||
full_fan_speed_layer = 3
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = ""
|
||||
end_filament_gcode = "; Filament-specific end gcode\n"
|
||||
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
bed_temperature = 0
|
||||
filament_colour = #FF3232
|
||||
filament_density = 1.24
|
||||
filament_max_volumetric_speed = 3.5
|
||||
filament_retract_length = 1
|
||||
filament_type = PLA
|
||||
first_layer_bed_temperature = 0
|
||||
first_layer_temperature = 205
|
||||
temperature = 200
|
||||
|
||||
[filament:*TPU*]
|
||||
inherits = *common*
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
filament_colour = #808080
|
||||
filament_deretract_speed = 15
|
||||
filament_density = 1.21
|
||||
filament_max_volumetric_speed = 1.4
|
||||
filament_retract_length = 0.6
|
||||
filament_retract_speed = 15
|
||||
filament_type = TPU
|
||||
first_layer_temperature = 220
|
||||
full_fan_speed_layer = 4
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
temperature = 215
|
||||
|
||||
[filament:Generic PLA @EasyThreeD]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic TPU @EasyThreeD]
|
||||
inherits = *TPU*
|
||||
filament_vendor = Generic
|
||||
Binary file not shown.
Reference in New Issue
Block a user