[print:Cocoa Press 2 (1.0mm layerheight)]
arc_fitting = emit_center
automatic_extrusion_widths = 0
automatic_infill_combination = 0
automatic_infill_combination_max_layer_height = 100%
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bed_temperature_extruder = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 2
bottom_solid_min_thickness = 0
bridge_acceleration = 1500
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 20
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers = "Cocoa Press 2｜1.6mm"
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==1.6
complete_objects = 0
default_acceleration = 1500
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 1
ensure_vertical_shell_thickness = enabled
external_perimeter_acceleration = 0
external_perimeter_extrusion_width = 0
external_perimeter_speed = 25
external_perimeters_first = 0
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extrusion_width = 0
fill_angle = 45
fill_density = 25%
fill_pattern = grid
first_layer_acceleration = 1500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0
first_layer_height = 0.4
first_layer_infill_speed = 0
first_layer_speed = 15
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 0
gap_fill_speed = 0
gcode_comments = 0
gcode_label_objects = octoprint
gcode_resolution = 0.0125
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
infill_acceleration = 1500
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_overlap = 50%
infill_speed = 40
inherits = Cocoa Press (0.5mm layerheight)
interface_shells = 0
interlocking_beam = 0
interlocking_beam_layer_count = 2
interlocking_beam_width = 0.8
interlocking_boundary_avoidance = 2
interlocking_depth = 2
interlocking_orientation = 22.5
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 1.0
max_print_speed = 80
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 0
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
only_one_perimeter_first_layer = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
over_bridge_speed = 0
overhang_speed_0 = 12
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
overhangs = 1
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 35
perimeters = 2
post_process = 
print_settings_id = 0.5mm Speed2
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0
scarf_seam_entire_loop = 0
scarf_seam_length = 20
scarf_seam_max_segment_length = 1
scarf_seam_on_inner_perimeters = 0
scarf_seam_only_on_smooth = 1
scarf_seam_placement = nowhere
scarf_seam_start_height = 0%
seam_gap_distance = 15%
seam_position = rear
single_extruder_multi_material_priming = 1
skirt_distance = 5
skirt_height = 1
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 20
solid_infill_acceleration = 0
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 0
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = honeycomb
support_material_spacing = 5
support_material_speed = 25
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 0
support_material_xy_spacing = 50%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
thin_walls = 0
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0
top_one_perimeter_type = none
top_solid_infill_acceleration = 0
top_solid_infill_speed = 25
top_solid_layers = 5
top_solid_min_thickness = 0
travel_acceleration = 0
travel_speed = 100
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_acceleration = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_flow = 100%
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_width = 60
xy_size_compensation = 0