[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
deretract_speed = 0
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin2
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,12500
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 2500,2500
machine_max_acceleration_y = 2500,2500
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 250
machine_max_feedrate_y = 250
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 20
machine_max_jerk_y = 20
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.5
min_layer_height = 0.07
octoprint_apikey = 
octoprint_host = 
printer_notes = 
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
end_gcode =;printing object ENDGCODE\n M107; Apagamos fan\n G90\n G92 E0\n G1 X200 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
z_offset = 0
cooling_tube_length = 5
cooling_tube_retraction = 91.5
extruder_clearance_height = 25
extruder_clearance_radius = 45