[print:0.08mm DETAIL @E2D 0.30 nozzle i311]
inherits = *0.08mm*; *0.3nozzle*; *i311*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
first_layer_height = 0.2
top_solid_layers = 10
bottom_solid_layers = 8
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
extra_perimeters = 0
detect_thin_walls = 0
thick_bridges = 0
overhangs = 1
raft_contact_distance = 0.08
support_material_contact_distance = 0.08
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
dont_support_bridges = 1
perimeter_speed = 30
small_perimeter_speed = 20
external_perimeter_speed = 20
infill_speed = 60
solid_infill_speed = 60
top_solid_infill_speed = 35
support_material_speed = 40
support_material_interface_speed = 80%
bridge_speed = 20
gap_fill_speed = 25
ironing_speed = 15
enable_dynamic_overhang_speeds = 1
first_layer_speed = 20
external_perimeter_acceleration = 500
perimeter_acceleration = 600
top_solid_infill_acceleration = 700
solid_infill_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 600
first_layer_acceleration = 600
first_layer_acceleration_over_raft = 0
wipe_tower_acceleration = 0
travel_acceleration = 0
default_acceleration = 1000
extrusion_width = 0.33
first_layer_extrusion_width = 0.4
perimeter_extrusion_width = 0.33
external_perimeter_extrusion_width = 0.33
infill_extrusion_width = 0.33
solid_infill_extrusion_width = 0.33
top_infill_extrusion_width = 0.3
support_material_extrusion_width = 0.3
infill_overlap = 10%
elefant_foot_compensation = 0