[print:*0.40mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.75
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.40
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 50
top_solid_layers = 4

# [print:NOT READY 0.40mm Do_I_Want_To_Support_This @0.75 nozzle] # M2, M3, U1
# inherits = *0.40mm*; *0.75nozzle*
# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75


# /~~~~~~~~~~~~~~~~~~~~~~~~~\
# |~~~ Filament Settings ~~~|
# \~~~~~~~~~~~~~~~~~~~~~~~~~/
# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
#   https://www.thingiverse.com/thing:2615842
# Pay particular attention to bridging, overhangs and retractions.
# Also print the following bed adhesion test at 0.1 layer height as well:
#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test