[print:0.25 SPEED @ VC4_300_IDEX 0.4]
inherits = *common*
bottom_solid_layers = 2
bottom_solid_min_thickness = 0.5
bridge_acceleration = 8000
bridge_flow_ratio = 1
brim_width = 0
compatible_printers_condition = nozzle_diameter[0]==0.4  && printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/
default_acceleration = 8000
elefant_foot_compensation = 0.2
enable_dynamic_overhang_speeds = 0
external_perimeter_acceleration = 8000
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 500
extrusion_width = 0.45
fill_density = 10%
first_layer_extrusion_width = 0.5
first_layer_speed = 80
gap_fill_speed = 500
infill_acceleration = 8000
infill_anchor = 2
infill_anchor_max = 12
infill_extrusion_width = 0.45
infill_speed = 500
layer_height = 0.25
max_print_speed = 500
notes = RR_SPEED
overhang_speed_3 = 75%
perimeter_acceleration = 8000
perimeter_extrusion_width = 0.45
perimeter_speed = 500
perimeters = 2
small_perimeter_speed = 500
solid_infill_acceleration = 8000
solid_infill_extrusion_width = 0.45
solid_infill_speed = 500
support_material_speed = 500
top_infill_extrusion_width = 0.42
top_one_perimeter_type = topmost
top_solid_infill_acceleration = 8000
top_solid_infill_speed = 500
top_solid_layers = 3
top_solid_min_thickness = 0.7
travel_acceleration = 15000