[printer:V-Core 4.0 300x300 IDEX 0.4mm nozzle]
inherits= *V-Core 4.0 Base*
autoemit_temperature_commands = 0
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode = ;[layer_z]
between_objects_gcode = ;BETWEEN_OBJECTS\nG92 E0
binary_gcode = 0
color_change_gcode = G92 E0
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "PunkFil PETG @RatRig"
default_print_profile = 0.2 QUALITY
deretract_speed = 120,120
end_gcode = SET_GCODE_OFFSET X=0 MOVE=0\nEND_PRINT\n
extra_loading_move = -2
extruder_colour = #CEFF00;#FFFFFF
extruder_offset = 0x0,0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = prusalink
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 10000
machine_max_acceleration_travel = 9000,1250
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 200
machine_max_feedrate_e = 120
machine_max_feedrate_x = 400
machine_max_feedrate_y = 400
machine_max_feedrate_z = 50
machine_max_jerk_e = 5
machine_max_jerk_x = 5
machine_max_jerk_y = 5
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.4,0.4
max_print_height = 300
min_layer_height = 0.1,0.1
multimaterial_purging = 140
nozzle_diameter = 0.4,0.4
nozzle_high_flow = 0,0
parking_pos_retraction = 92
pause_print_gcode = M601
prefer_clockwise_movements = 0
print_host = 
printer_model = VC4_300_IDEX
printer_notes = RR_VC4_300_IDEX_04N
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 1,1
retract_before_wipe = 0%,0%
retract_layer_change = 1,1
retract_length = 0.8,0.8
retract_length_toolchange = 1,1
retract_lift = 0.6,0.6
retract_lift_above = 0,0
retract_lift_below = 500,500
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 120,120
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = ;RATOS_HINT:ALREADY_POSITIONED_FOR_IDEX\nSET_GCODE_OFFSET X=0 MOVE=0\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
template_custom_gcode = 
thumbnails = 64x64/PNG, 400x300/PNG
thumbnails_format = PNG
toolchange_gcode = T[next_extruder]
travel_lift_before_obstacle = 0,0
travel_max_lift = 1.5,1.5
travel_ramping_lift = 0,0
travel_slope = 1,1
use_firmware_retraction = 1
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0,0
z_offset = 0