[printer:Zonestar Z6]
inherits = *common*
printer_model = Z6
printer_variant = 0.4
bed_shape = 0x0,150x0,150x150,0x150
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
min_layer_height = 0.1
max_layer_height = 0.3
max_print_height = 150
nozzle_diameter = 0.4
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 6.5
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y100 E8 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0