[printer:Zonestar Z9+M3 HOTEND]
inherits = *common*
printer_model = Z9
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30
before_layer_gcode = G92 E0
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.15,0.15,0.15
nozzle_diameter = 0.4,0.4,0.4
retract_before_travel = 2,2,2
retract_before_wipe = 0%,0%,0%
retract_layer_change = 0,0,0
retract_length = 10,10,10
retract_length_toolchange = 0,0,0
retract_lift = 0,0,0
retract_lift_above = 0,0,0
retract_lift_below = 0,0,0
retract_restart_extra = 0,0,0
retract_restart_extra_toolchange = 0,0,0
retract_speed = 35,35,35
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 1
wipe = 0,0,0
layer_gcode = G92 E0