[print:0.20mm - Dual 2in1 PLA with PVA Support @GCREATE]
inherits = *0.20mm*; 0.20mm - Dual 2in1 @GCREATE
compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 400
dont_support_bridges = 0
draft_shield = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0
external_perimeter_speed = 75%
external_perimeters_first = 0
extra_perimeters = 1
extrusion_width = 0
fill_angle = 45
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.23
first_layer_speed = 35
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 80
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 65
perimeters = 4
post_process = 
print_settings_id = 0.20mm - Dual 2in1 @GCREATE PLA PVA Support
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 35
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0
support_material_enforce_layers = 0
support_material_extruder = 2
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 2
support_material_interface_layers = 4
support_material_interface_spacing = 0
support_material_interface_speed = 90%
support_material_pattern = rectilinear-grid
support_material_spacing = 3
support_material_speed = 65
support_material_synchronize_layers = 1
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 0
thin_walls = 1
threads = 8
top_fill_pattern = monotonic
top_infill_extrusion_width = 0
top_solid_infill_speed = 35
top_solid_layers = 4
top_solid_min_thickness = 0
travel_speed = 130
wipe_tower = 1
wipe_tower_bridging = 20
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 75
wipe_tower_x = 50
wipe_tower_y = 400



##################################
#  SET FILAMENT VARIANTS         #
##################################

# TEMPLATE

#[filament:*PLA*]
#inherits = *common*

#filament_type = PLA
#filament_density = 1.24
#filament_cost = 20

#first_layer_bed_temperature = 60
#first_layer_temperature = 200
#temperature = 200
#bed_temperature = 60

#fan_always_on = 1
#cooling = 1
#disable_fan_first_layers = 1
#max_fan_speed = 90
#min_fan_speed = 90
#bridge_fan_speed = 75

#fan_below_layer_time = 15
#slowdown_below_layer_time = 10

#compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/


# Common filament preset across all filaments