[printer:Anycubic Kobra 2 Plus]
autoemit_temperature_commands = 1
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,330x0,330x330,0x330
rect_size_x = 330
rect_size_y = 330
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = Anycubic PLA @KOBRA2 PLUS
default_print_profile = 0.2mm NORMAL @KOBRA2 PLUS
deretract_speed = 0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.95} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM84; disable motors                    ; disable stepper motors
extra_loading_move = -2
extruder_colour = #FFFFFF
extruder_offset = 0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 10000
machine_max_acceleration_travel = 3000,1250
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 3000
machine_max_feedrate_e = 100
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 16
machine_max_jerk_e = 15
machine_max_jerk_x = 15
machine_max_jerk_y = 15
machine_max_jerk_z = 15
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.28
max_print_height = 400
min_layer_height = 0.08
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = KOBRA2 PLUS
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_KOBRA2_PLUS
printer_settings_id =
printer_technology = FFF
printer_variant = 0.4
printer_vendor = Anycubic
printhost_apikey = 
printhost_cafile = 
remaining_times = 0
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 2.5
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 80
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28                                        ; move X/Y/Z to min endstops\nG1 Z0.28                                   ; lift nozzle a bit \nG92 E0 \nG1 Y3 F2400                                    ; zero the extruded length \nG1 X180  E40 F500                       ; Extrude 25mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-0.2 F3000                                ; Retract a little \nG1 X181 F4000                              ; Quickly wipe away from the filament line\nM117
template_custom_gcode = 
thumbnails = 230x110
thumbnails_format = PNG
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0