[printer:Anycubic Kobra 3]
autoemit_temperature_commands = 0
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,250x0,250x250,0x250
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm\nG92 E0
between_objects_gcode = 
binary_gcode = 0
build_prepare_time = 249
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = Anycubic PLA @KOBRA3
default_print_profile = 0.2mm NORMAL @KOBRA3
deretract_speed = 80,80,80,80
end_gcode = G1 X5 Y{print_bed_max[1]*0.95} F{travel_speed*60} ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM84; disable motors                    ; disable stepper motors
extra_loading_move = -2
extruder_colour = #FFFFFF;#FFEC3D;#EC008C;#212721
extruder_offset = 0x0,0x0,0x0,0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
is_mmu = 1
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 20000
machine_max_acceleration_extruding = 20000
machine_max_acceleration_retracting = 20000
machine_max_acceleration_travel = 3000,1250
machine_max_acceleration_x = 15000
machine_max_acceleration_y = 15000
machine_max_acceleration_z = 5000
machine_max_feedrate_e = 120
machine_max_feedrate_x = 600
machine_max_feedrate_y = 600
machine_max_feedrate_z = 10
machine_max_jerk_e = 10
machine_max_jerk_x = 20
machine_max_jerk_y = 20
machine_max_jerk_z = 5
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.28,0.28,0.28,0.28
max_print_height = 260
min_layer_height = 0.12,0.12,0.12,0.12
multimaterial_purging = 140
nozzle_diameter = 0.4,0.4,0.4,0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = KOBRA3
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_KOBRA3
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 0
retract_before_travel = 1,1,1,1
retract_before_wipe = 0%,0%,0%,0%
retract_layer_change = 1,1,1,1
retract_length = 0.8,0.8,0.8,0.8
retract_length_toolchange = 1,1,1,1
retract_lift = 0.4,0.4,0.4,0.4
retract_lift_above = 0.3,0.3,0.3,0.3
retract_lift_below = 259.9,259.9,259.9,259.9
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
retract_speed = 80,80,80,80
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05
template_custom_gcode = 
thumbnails = 230x110/PNG
thumbnails_format = PNG
toolchange_gcode = 
travel_lift_before_obstacle = 1,1,1,1
travel_max_lift = 0.4,0.4,0.4,0.4
travel_ramping_lift = 1,1,1,1
travel_slope = 10,10,10,10
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1,1,1,1
z_offset = 0