[printer:*common_mega*]
printer_technology = FFF
bed_shape = 0x0,210x0,210x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
default_filament_profile = Generic PLA @MEGA
default_print_profile = 0.15mm QUALITY @MEGA
deretract_speed = 50
end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
extruder_colour = #808080
gcode_flavor = marlin
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.36
max_print_height = 205
remaining_times = 1
retract_before_travel = 1.5
retract_before_wipe = 60%
retract_layer_change = 1
retract_length = 6
retract_lift = 0.075
retract_lift_below = 204
retract_speed = 40
silent_mode = 0
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
thumbnails = 16x16,220x124
use_relative_e_distances = 1
wipe = 1
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 1250
machine_max_acceleration_retracting = 1250
machine_max_acceleration_x = 3000
machine_max_acceleration_y = 2000
machine_max_acceleration_z = 60
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 6
machine_max_jerk_e = 5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.4
extruder_clearance_height = 35
extruder_clearance_radius = 60