[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 65
brim_width = 0
brim_type = outer_only
clip_multipart_objects = 1
complete_objects = 0
dont_support_bridges = 0
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.42
external_perimeter_speed = 80
external_perimeters_first = 1
extra_perimeters = 1
extrusion_width = 0.42
fill_angle = 45
fill_density = 15%
fill_pattern = gyroid
first_layer_extrusion_width = 0.42
first_layer_height = 0.16
first_layer_speed = 35
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.42
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 20%
infill_speed = 90
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
overhangs = 1
perimeter_extruder = 1
perimeter_extrusion_width = 0.42
perimeter_generator = arachne
perimeter_speed = 65
perimeters = 2
raft_first_layer_density = 60
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 2
skirt_height = 1
skirts = 3
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.42
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 50
support_material_buildplate_only = 0
support_material_contact_distance = 0.25
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.42
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = honeycomb
support_material_spacing = 2
support_material_speed = 60
support_material_style = snug
support_material_synchronize_layers = 0
support_material_threshold = 65
support_material_with_sheath = 0
support_material_xy_spacing = 200%
thin_walls = 1
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.42
top_solid_infill_speed = 35
travel_speed = 150
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 40
xy_size_compensation = 0

# /~~~~~~~~~~~~~~~~~~~~~~~\
# |~~~ Nozzle Variants ~~~|
# \~~~~~~~~~~~~~~~~~~~~~~~/