[printer:MakerGear Ultra One]
inherits = *default*
bed_shape = 0x0,406x0,406x355,0x355
default_filament_profile = "MakerGear PLA @MakerGear"
default_print_profile = 0.20mm Quality @0.50 nozzle MakerGear
end_gcode = M106 P2 S0 ; turn off exhaust fan\n \nM104 S0 ; turn off extruder\nM104 S0 T0 ; turn off extruder\nM104 S0 T1; turn off extruder\nM140 P0 S0 ; turn off bed\nM140 P1 S0 ; turn off bed\nM140 P2 S0 ; turn off bed\nM140 P3 S0 ; turn off bed\nM106 S0 ; turn off cooling fan\nG91 ; relative mode\nG1 Z20 ; move Z down 20mm\nG90;  absolute mode\n\nG28 XY ; home tool/s\nM502 ; set to firmware default values\nT0 ; defualt tool should always be T0
extruders_count = 2
extruder_offset = 0x0,0x0
gcode_flavor = reprapfirmware
host_type = octoprint
machine_max_acceleration_e = 2000, 2000
machine_max_acceleration_extruding = 1000, 1000
machine_max_acceleration_retracting = 1500, 1500
machine_max_acceleration_x = 1000, 1000
machine_max_acceleration_y = 1000, 1000
machine_max_acceleration_z = 10, 10
machine_max_feedrate_e = 30, 30
machine_max_feedrate_x = 300, 300
machine_max_feedrate_y = 300, 300
machine_max_feedrate_z = 20, 20
machine_max_jerk_e = 10, 10
machine_max_jerk_x = 5, 5
machine_max_jerk_y = 5, 5
machine_max_jerk_z = 1, 1
max_layer_height = 0.35,0.35
max_print_height = 350
nozzle_diameter = 0.50,0.50
printer_model = MAKERGEAR_U1
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_U1\n 
printer_variant = 0.50
retract_length_toolchange = 4,4
start_gcode = ;U1 Startup Script\n\nM203 X18000.00 Y18000.00 Z1200.00 U18000.00 E1800.00 ; U1 max feedrate mm/minute\n        M201 X1200 Y1200 Z10 U1200 E2000             ; U1 Maximum Acceleration axes mm/s^2\n        M204 P2000 T2000                             ; U1 Maximum Acceleration printing / travel mm/s^2\n        M566 X300 Y300 Z60 U300 E600                 ; U1  instantenous speed change 'jerk' in mm/minute\n        M593 F0                                      ; make sure dynamix acceleration is off \n\n; Turn off hotends to reduce ooze on the bed during startup\nM104 T0 S0\nM104 T1 S0\n; Note: this will not explicitly wait for the hotends to cool down\n\nM221 D0 S100  ; Extruder rate for T0 is set in the profile so set to 100%\nM221 D1 S100  ; Extruder rate for T1 is set in the profile so set to 100%\n\n{if first_layer_bed_temperature[1] < first_layer_bed_temperature[0]}\nM140 P0 S{first_layer_bed_temperature[0]}	     ; Middle bed heater strip\nM140 P1 S{first_layer_bed_temperature[0]}	     ; 2nd from left and second from right bed heater\nM140 P2 S{first_layer_bed_temperature[0]}	     ; Left bed heater strip\nM140 P3 S{first_layer_bed_temperature[0]}	     ; Right bed heater strip\n{endif}\n\n{if first_layer_bed_temperature[0] < first_layer_bed_temperature[1]}\nM140 P0 S{first_layer_bed_temperature[1]}	     ; Middle bed heater strip\nM140 P1 S{first_layer_bed_temperature[1]}	     ; 2nd from left and second from right bed heater\nM140 P2 S{first_layer_bed_temperature[1]}	     ; Left bed heater strip\nM140 P3 S{first_layer_bed_temperature[1]}	     ; Right bed heater strip\n{endif}\n\nM116 ; Wait for all bed heating pads to reach operation temperature before homing (this will wait for cooldown if there is overshoot)\nG28  ; 1)Home XY,  2)Home Z,  3)Auto Level,  4)Home Z,  5) Mesh Level\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[1]}\n\n; Wait for hotends to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[1]}\n\nM116 ; Wait for all hotends to reach operation temperature (this will wait for cooldown if there is overshoot)\n\n; Purge Scripts\n{if temperature[1] == 0}\n; U1 Single Mode - Left Purge\nT0 		    ; implied by G28 but explicilty called here\nG1 Z20.0 F6000      ; Move Z to 20\nG92 E0              ; Zero Extruder\nM564 S0 	    ; Safteys off\nG1 X160 Y5 F1000    ; Move to unused front edge\nG1 Z0.30 F1000      ; Move closer to the bed\nG1 X40 E20 F1000    ; Deposit purge line\nG1 X30 Z0.05 F1000  ; Wipe off tail\nG1 Z10		    ; Move away from bed\nG1 Y11 		    ; Move to Y-axis safe zone\nG92 E0 	            ; Zero extruder\nM564 S0 	    ; Safteys off\nM106 P2 S50         ; Enable exhaust fan\n{endif}\n\n{if temperature[0] == 0}\n; U1 Single Mode - Right Purge\nT1		    ; Switch to T1\nG1 Z20.0 F6000      ; Move Z to 20\nG92 E0              ; Zero Extruder\nM564 S0 	    ; Safteys off\nG1 X160 Y5 F1000    ; Move to unused front edge\nG1 Z0.30 F1000      ; Move closer to the bed\nG1 X40 E20 F1000    ; Deposit purge line\nG1 X30 Z0.05 F1000  ; Wipe off tail\nG1 Z10		    ; Move away from bed\nG1 Y11 		    ; Move to y safe zone\nG92 E0 		    ; Zero extruder\nM564 S0             ; Safteys off\nM106 P2 S50         ; Enable exhaust fan\n{endif}\n\n{if temperature[0] > 0 && temperature[1] > 0}\n; U1 T0/T1 Startup Script\nT1 		    ; Switch to T1\nG1 Z20.0 F6000      ; Move Z to 20\nG92 E0              ; Zero Extruder\nM564 S0 	    ; Safteys off\nG1 X160 Y5 F1000    ; Move to unused front edge\nG1 Z0.30 F1000      ; Move closer to the bed\nG1 X40 E20 F1000    ; Deposit purge line\nG1 X30 Z0.05 F1000  ; Wipe off tail\nG1 Z10		    ; Move away from bed\nG1 Y11 		    ; Move to y safe zone\nG92 E0 		    ; Zero extruder\n\nT0		    ; Switch to T0\nG1 X360 Y5 F1000    ; Move to unused front edge\nG1 Z0.30 F1000      ; Move closer to the bed\nG1 X240 E20 F1000   ; Deposit purge line\nG1 X230 Z0.05 F1000 ; Wipe off tail\nG1 Z10		    ; Move away from bed\nG1 Y11 		    ; Move to y safe zone\nG92 E0 		    ; Zero extruder\nM564 S1 	    ; Safteys on\nM106 P2 S50         ; Enable exhaust fan\n{endif}
toolchange_gcode = 
# thumbnails = 16x16,220x124