[print:*common*]
arc_fitting = disabled
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_infill_flow_ratio = 1
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 2000
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
default_acceleration = 10000
detect_narrow_internal_solid_infill = 1
dont_support_bridges = 0
draft_shield = disabled
elefant_foot_compensation = 0
elefant_foot_compensation_layers = 1
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 3000
external_perimeter_extrusion_width = 0.42
external_perimeter_speed = 200
external_perimeters_first = 0
extra_perimeters = 1
extra_perimeters_on_overhangs = 1
extrusion_width = 0.42
fill_angle = 45
fill_density = 15%
fill_pattern = cubic
first_layer_acceleration = 500
first_layer_acceleration_over_raft = 500
first_layer_extrusion_width = 0.5
first_layer_height = 0.2
first_layer_infill_speed = 100
first_layer_speed = 50
first_layer_speed_over_raft = 30
first_layer_travel_speed = 300
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 250
gcode_comments = 0
gcode_label_objects = firmware
gcode_resolution = 0.0125
gcode_substitutions = 
infill_acceleration = 10000
infill_anchor = 400%
infill_anchor_max = 20
infill_every_layers = 1
infill_extruder = 0
infill_extrusion_width = 0.45
infill_first = 0
infill_overlap = 15%
infill_speed = 270
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
layer_height = 0.2
max_bridge_length = 10
max_print_speed = 600
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 5
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes = 
only_one_wall_first_layer = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base]_[filament_type]_[print_time].gcode
overhang_speed_0 = 10
overhang_speed_1 = 30
overhang_speed_2 = 50
overhang_speed_3 = 0
overhangs = 1
perimeter_acceleration = 5000
perimeter_extruder = 0
perimeter_extrusion_width = 0.45
perimeter_generator = classic
perimeter_speed = 300
perimeters = 2
post_process = 
print_settings_id = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0
seam_gap = 15%
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 6
skirt_height = 1
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
slow_down_layers = 0
small_perimeter_speed = 100
solid_infill_acceleration = 10000
solid_infill_below_area = 15
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.42
solid_infill_speed = 220
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.42
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.5
support_material_interface_speed = 80
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 150
support_material_style = snug
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 0.35
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 0
thin_walls = 0
top_area_threshold = 100%
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.42
top_one_wall_type = all_top
top_solid_infill_acceleration = 2000
top_solid_infill_flow_ratio = 1
top_solid_infill_speed = 200
top_solid_layers = 5
top_solid_min_thickness = 1
travel_acceleration = 10000
travel_speed = 500
travel_speed_z = 10
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 1
wipe_tower_acceleration = 10000
wipe_tower_bridging = 10
wipe_tower_brim_width = 3
wipe_tower_cone_angle = 1
wipe_tower_extra_flow = 100%
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 35
wipe_tower_x = 180
wipe_tower_y = 140
xy_contour_compensation = 0
xy_hole_compensation = 0
interlocking_beam = 1
interlocking_beam_layer_count = 2
interlocking_beam_width = 1.6
interlocking_boundary_avoidance = 2
interlocking_depth = 2
interlocking_orientation = 22.5

# Machine Print preset