[filament:PunkFil ABS VC3 @RatRig]
filament_vendor = RatRig
filament_type = ABS
bed_temperature = 110
bridge_fan_speed = 80
cooling = 1
disable_fan_first_layers = 2
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.92
fan_always_on = 1
filament_colour = #ceff00
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cooling_zone_pause = 0
filament_cost = 25.5
filament_density = 1.04
filament_retract_speed = 120
filament_deretract_speed = 120
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_speed = 0
filament_max_volumetric_speed = 40
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_layer_change = 1
filament_retract_length = 0.8
filament_soluble = 0
filament_spool_weight = 1000
filament_toolchange_delay = 0
filament_toolchange_part_fan_speed = 50
filament_toolchange_temp = 200
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_wipe = nil
first_layer_bed_temperature = 110
first_layer_temperature = 260
full_fan_speed_layer = 0
max_fan_speed = 80
min_fan_speed = 40
min_print_speed = 30
fan_below_layer_time = 8
slowdown_below_layer_time = 3
start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.023"
temperature = 260
filament_shrinkage_compensation_xy = 0.67
compatible_printers_condition = printer_model=~/.*VC3_300*/ or printer_model=~/.*VC3_400*/ or printer_model=~/.*VC3_500*/ or printer_notes=~/.*VCore4XYsettings*/