[filament:PunkFil ASACF @0.4 V2]
bed_temperature = 110
bridge_fan_speed = 50
chamber_minimal_temperature = 0
chamber_temperature = 0
compatible_printers_condition = nozzle_diameter[0]==0.4
cooling = 1
disable_fan_first_layers = 2
enable_dynamic_fan_speeds = 0
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 0.9
fan_always_on = 1
fan_below_layer_time = 5
filament_abrasive = 0
filament_colour = #BBBBBB
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_cost = 54.99
filament_density = 1.27
filament_deretract_speed = nil
filament_diameter = 1.75
filament_infill_max_crossing_speed = 0
filament_infill_max_speed = 0
filament_load_time = 0
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 20
filament_minimal_purge_on_wipe_tower = 0
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_purge_multiplier = 100%
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_seam_gap_distance = nil
filament_settings_id = ""
filament_shrinkage_compensation_xy = -0.5%
filament_shrinkage_compensation_z = 0%
filament_soluble = 0
filament_spool_weight = 201
filament_stamping_distance = 0
filament_stamping_loading_speed = 20
filament_toolchange_delay = 0
filament_travel_lift_before_obstacle = nil
filament_travel_max_lift = nil
filament_travel_ramping_lift = nil
filament_travel_slope = nil
filament_type = ASA
filament_unload_time = 0
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_vendor = RatRig
filament_wipe = nil
first_layer_bed_temperature = 110
first_layer_temperature = 270
full_fan_speed_layer = 2
idle_temperature = nil
inherits = 
max_fan_speed = 60
min_fan_speed = 50
min_print_speed = 20
overhang_fan_speed_0 = 80
overhang_fan_speed_1 = 70
overhang_fan_speed_2 = 50
overhang_fan_speed_3 = 60
slowdown_below_layer_time = 10
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}
temperature = 270