[printer:SV01 PRO]
inherits = *common*
bed_shape = 0x0,280x0,280x240,0x240
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
cooling_tube_length = 5
cooling_tube_retraction = 91.5
deretract_speed = 0
end_gcode = G1 X5 Y200  F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n
extra_loading_move = -2
extruder_colour = #0080FF
gcode_flavor = marlin2
high_current_on_filament_swap = 0
machine_max_acceleration_e = 1000,5000
machine_max_acceleration_extruding = 500,1250
machine_max_acceleration_retracting = 500,1250
machine_max_acceleration_x = 500,1000
machine_max_acceleration_y = 500,1000
machine_max_acceleration_z = 100,200
machine_max_feedrate_e = 25,120
machine_max_feedrate_x = 300,200
machine_max_feedrate_y = 300,200
machine_max_feedrate_z = 5,12
machine_max_jerk_e = 5,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
max_print_height = 300
min_layer_height = 0.1
nozzle_diameter = 0.4
parking_pos_retraction = 92
printer_settings_id =
printer_technology = FFF
remaining_times = 0
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV01 PRO\n
retract_layer_change = 0
retract_length = 2
retract_length_toolchange = 10
silent_mode = 0
start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ; 
use_relative_e_distances = 0
printer_model = SV01 PRO
default_print_profile = 0.20mm SPEED @SV01
thumbnails = 160x120