[vendor]
repo_id = non-prusa-fff
# Vendor name will be shown by the Config Wizard.
name = Voron
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 3.0.0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Voron/

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.

# Printer model name will be shown by the installation wizard.

[printer_model:V2_250]
name = VORON2 250mm
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON2
bed_model = bedmodel_250x250.stl
bed_texture = bedtexture_250x250-dark.png
thumbnail = thumbnail_v2.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:V2_300]
name = VORON2 300mm
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON2
bed_model = bedmodel_300x300.stl
bed_texture = bedtexture_300x300-dark.png
thumbnail = thumbnail_v2.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:V2_350]
name = VORON2 350mm
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON2
bed_model = bedmodel_350x350.stl
bed_texture = bedtexture_350x350-dark.png
thumbnail = thumbnail_v2.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:VT_250]
name = VORON Trident 250mm
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON Trident
bed_model = bedmodel_250x250.stl
bed_texture = bedtexture_250x250-dark.png
thumbnail = thumbnail_vt.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:VT_300]
name = VORON Trident 300mm
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON Trident
bed_model = bedmodel_300x300.stl
bed_texture = bedtexture_300x300-dark.png
thumbnail = thumbnail_vt.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:VT_350]
name = VORON Trident 350mm
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON Trident
bed_model = bedmodel_350x350.stl
bed_texture = bedtexture_350x350-dark.png
thumbnail = thumbnail_vt.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:V0_120]
name = VORON Zero
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON Zero
bed_model = bedmodel_120x120.stl
bed_texture = bedtexture_120x120-dark.png
thumbnail = thumbnail_v0.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

[printer_model:VS_MK52]
name = VORON Switchwire
variants = HF0.4; HF0.5; HF0.6; HF0.8; 0.25; 0.3; 0.4; 0.5; 0.6; 0.8
technology = FFF
family = VORON Switchwire
bed_model = bedmodel_252x241.stl
bed_texture = bedtexture_252x241-dark.png
thumbnail = thumbnail_vs.png
default_materials = Generic ABS @Voron HF0.4; Generic ASA @Voron HF0.4; Generic PLA @Voron HF0.4; Generic PETG @Voron HF0.4

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print presets

[print:*common*]
arc_fitting = disabled
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 4
bottom_solid_min_thickness = 0.5
bridge_acceleration = 1500
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
default_acceleration = 4000
dont_support_bridges = 0
elefant_foot_compensation = 0.2
enable_dynamic_overhang_speeds = 1
ensure_vertical_shell_thickness = 1
external_perimeter_acceleration = 4000
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 170
external_perimeters_first = 0
extra_perimeters = 0
extrusion_width = 0.45
fill_angle = 45
fill_density = 15%
fill_pattern = grid
first_layer_acceleration = 500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.2
first_layer_infill_speed = 100
first_layer_speed = 40
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 120
gcode_comments = 0
gcode_label_objects = firmware
gcode_resolution = 0.008
infill_acceleration = 4000
infill_anchor = 2
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_overlap = 15%
infill_speed = 200
interface_shells = 0
ironing_type = top
layer_height = 0.2
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 4
mmu_segmented_region_max_width = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
over_bridge_speed = 50%
overhang_speed_0 = 15
overhang_speed_1 = 25
overhang_speed_2 = 30
overhang_speed_3 = 80%
overhangs = 1
perimeter_acceleration = 7000
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 170
perimeters = 2
raft_contact_distance = 0.15
raft_expansion = 1.5
raft_first_layer_density = 80%
raft_first_layer_expansion = 3
seam_position = aligned
single_extruder_multi_material_priming = 0
skirts = 2
skirt_height = 2
slice_closing_radius = 0.049
small_perimeter_speed = 170
solid_infill_acceleration = 4000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 200
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = 0
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.4
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 3
support_material_interface_pattern = auto
support_material_interface_spacing = 0.2
support_material_interface_speed = 50%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 120
support_material_style = snug
support_material_synchronize_layers = 0
support_material_threshold = 35
support_material_with_sheath = 0
support_material_xy_spacing = 80%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 8
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
thick_bridges = 0
thin_walls = 0
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.42
top_one_perimeter_type = top
top_solid_infill_acceleration = 1200
top_solid_infill_speed = 100
top_solid_layers = 5
top_solid_min_thickness = 0.7
travel_acceleration = 7000
travel_short_distance_acceleration = 250
travel_speed = 350
travel_speed_z = 12
wipe_tower = 1
wipe_tower_cone_angle = 25
wipe_tower_extra_flow = 250%
wipe_tower_extra_spacing = 110%

[print:*common_025*]
inherits = *common*
bottom_solid_layers = 6
bridge_speed = 30
brim_separation = 0
default_acceleration = 2000
elefant_foot_compensation = 0
external_perimeter_extrusion_width = 0.27
extrusion_width = 0.27
first_layer_extrusion_width = 0.32
first_layer_infill_speed = 35
first_layer_speed = 20
gap_fill_speed = 50
infill_acceleration = 3000
infill_anchor = 1
infill_extrusion_width = 0.27
infill_speed = 100
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
perimeter_extrusion_width = 0.27
perimeters = 3
raft_first_layer_density = 95%
solid_infill_acceleration = 2500
solid_infill_extrusion_width = 0.27
solid_infill_speed = 140
support_material_contact_distance = 0.15
support_material_extrusion_width = 0.25
support_material_interface_speed = 75%
support_material_spacing = 1
support_material_speed = 70
support_material_xy_spacing = 150%
support_tree_tip_diameter = 0.5
top_infill_extrusion_width = 0.27
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 60
top_solid_layers = 9
travel_acceleration = 3000
wipe_tower = 1

[print:*common_03*]
inherits = *common*
bottom_solid_layers = 5
bottom_solid_min_thickness = 0.5
bridge_speed = 30
brim_separation = 0
default_acceleration = 2000
elefant_foot_compensation = 0
external_perimeter_extrusion_width = 0.34
extrusion_width = 0.34
first_layer_extrusion_width = 0.4
first_layer_infill_speed = 60
first_layer_speed = 30
gap_fill_speed = 50
infill_acceleration = 4000
infill_anchor = 1
infill_extrusion_width = 0.34
infill_overlap = 15%
output_filename_format = {input_filename_base}_0.3n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
perimeter_extrusion_width = 0.34
perimeters = 3
raft_first_layer_density = 90%
solid_infill_extrusion_width = 0.34
support_material_contact_distance = 0.15
support_material_extrusion_width = 0.3
support_material_interface_speed = 75%
support_material_spacing = 1
support_material_speed = 70
support_material_xy_spacing = 100%
support_tree_tip_diameter = 0.6
top_infill_extrusion_width = 0.3
top_solid_infill_acceleration = 1000
top_solid_layers = 6
top_solid_min_thickness = 0.7

[print:*common_05*]
inherits = *common*
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.5
default_acceleration = 2500
external_perimeter_extrusion_width = 0.55
extrusion_width = 0.55
first_layer_extrusion_width = 0.55
gap_fill_speed = 70
gcode_resolution = 0.008
infill_acceleration = 4000
infill_anchor_max = 15
infill_extrusion_width = 0.55
output_filename_format = {input_filename_base}_0.5n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
perimeter_extrusion_width = 0.55
raft_contact_distance = 0.25
solid_infill_extrusion_width = 0.55
support_material_contact_distance = 0.25
support_material_extrusion_width = 0.4
support_material_interface_spacing = 0.22
support_material_interface_speed = 75%
support_material_xy_spacing = 80%
support_tree_tip_diameter = 1
top_infill_extrusion_width = 0.5
top_solid_layers = 4
top_solid_min_thickness = 0.7
first_layer_speed = 45
support_material_threshold = 40

[print:*common_06*]
inherits = *common*
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
external_perimeter_extrusion_width = 0.68
extrusion_width = 0.68
fill_density = 20%
first_layer_extrusion_width = 0.68
first_layer_infill_speed = 70
gap_fill_speed = 70
gcode_resolution = 0.0125
infill_anchor = 2.5
infill_anchor_max = 20
infill_extrusion_width = 0.68
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
over_bridge_speed = 0
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 50
perimeter_extrusion_width = 0.68
raft_contact_distance = 0.25
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.15
support_material_extrusion_width = 0.5
support_material_interface_spacing = 0.25
support_material_interface_speed = 75%
support_material_speed = 90
support_material_xy_spacing = 80%
support_tree_tip_diameter = 1.2
top_infill_extrusion_width = 0.55
top_solid_layers = 4
top_solid_min_thickness = 0.9
first_layer_speed = 45
support_material_threshold = 40

[print:*common_08*]
inherits = *common*
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.8
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8
external_perimeter_extrusion_width = 0.9
extrusion_width = 0.9
fill_pattern = rectilinear
first_layer_extrusion_width = 1
first_layer_infill_speed = 55
gap_fill_speed = 40
gcode_resolution = 0.0125
infill_anchor = 2.5
infill_anchor_max = 20
infill_extrusion_width = 0.9
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
over_bridge_speed = 0
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 80%
perimeter_extrusion_width = 0.9
raft_contact_distance = 0.2
seam_position = nearest
solid_infill_extrusion_width = 0.9
support_material_contact_distance = 0.25
support_material_extrusion_width = 0.65
support_material_interface_spacing = 0.35
support_material_interface_speed = 85%
support_material_xy_spacing = 80%
support_tree_tip_diameter = 1.6
thick_bridges = 1
top_infill_extrusion_width = 0.8
top_solid_layers = 4
top_solid_min_thickness = 1.2
first_layer_speed = 45
support_material_threshold = 40

# CoreXY - Base

[print:*CORE_XY*]
travel_speed = 350
travel_acceleration = 7000
default_acceleration = 3000
wipe_tower_acceleration = 0
support_material_interface_layers = 3
first_layer_speed = 45
first_layer_infill_speed = 100
max_print_speed = 300
travel_short_distance_acceleration = 250

[print:*CORE_XY_SPEED*]
infill_acceleration = 7000
solid_infill_acceleration = 6000
perimeter_acceleration = 6000
external_perimeter_acceleration = 3000
top_solid_infill_acceleration = 2000

[print:*CORE_XY_STRUCTURAL*]
infill_acceleration = 6000
solid_infill_acceleration = 4000
perimeter_acceleration = 2500
external_perimeter_acceleration = 1500
top_solid_infill_acceleration = 2000
default_acceleration = 3000
perimeter_speed = 70
external_perimeter_speed = 50
small_perimeter_speed = 50

# CoreXZ - Base

[print:*CORE_XZ*]
bridge_acceleration = 800
default_acceleration = 1000
first_layer_acceleration = 600
first_layer_speed = 20
infill_acceleration = 2000
infill_anchor = 2
perimeter_acceleration = 800
raft_first_layer_density = 80%
solid_infill_acceleration = 1500
support_material_threshold = 45
top_solid_infill_acceleration = 800
travel_speed = 200
travel_speed_z = 12

[print:*CORE_XZ_025*]
default_acceleration = 1500
travel_acceleration = 3000
external_perimeter_speed = 40
gap_fill_speed = 40
small_perimeter_speed = 40
first_layer_infill_speed = 35
first_layer_speed = 20
max_print_speed = 200
travel_speed = 300
compatible_printers_condition = printer_model=~/(VORON_SWITCHWIRE)/ and nozzle_diameter[0]==0.25

[print:*CORE_XZ_03*]
default_acceleration = 2000
external_perimeter_acceleration = 1500
infill_acceleration = 4000
perimeter_acceleration = 2000
solid_infill_acceleration = 2500
top_solid_infill_acceleration = 1000
travel_acceleration = 4000
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45
first_layer_speed = 30
max_print_speed = 200
travel_speed = 300
support_material_interface_speed = 45%
support_material_speed = 70
compatible_printers_condition = printer_model=~/(VORON_SWITCHWIRE)/ and nozzle_diameter[0]==0.3

[print:*CORE_XZ_04*]
bridge_acceleration = 1500
bridge_speed = 50
default_acceleration = 4000
external_perimeter_acceleration = 4000
external_perimeter_speed = 170
first_layer_acceleration = 500
first_layer_infill_speed = 100
first_layer_speed = 40
gap_fill_speed = 120
infill_acceleration = 4000
infill_speed = 200
max_print_speed = 200
overhang_speed_0 = 15
overhang_speed_1 = 25
perimeter_acceleration = 4000
perimeter_speed = 170
small_perimeter_speed = 170
solid_infill_acceleration = 4000
support_material_interface_speed = 50%
support_material_speed = 120
top_solid_infill_acceleration = 1500
top_solid_infill_speed = 100
travel_acceleration = 4000
travel_speed = 300
compatible_printers_condition = printer_model=~/(VORON_SWITCHWIRE)/ and nozzle_diameter[0]==0.5

[print:*CORE_XZ_05*]
first_layer_speed = 40
max_print_speed = 200
travel_speed = 300
compatible_printers_condition = printer_model=~/(VORON_SWITCHWIRE)/ and nozzle_diameter[0]==0.5

[print:*CORE_XZ_06*]
default_acceleration = 2500
infill_acceleration = 4000
solid_infill_acceleration = 2500
top_solid_infill_acceleration = 1500
travel_acceleration = 4000
external_perimeter_speed = 45
gap_fill_speed = 80
small_perimeter_speed = 45
first_layer_speed = 40
max_print_speed = 200
travel_speed = 300
compatible_printers_condition = printer_model=~/(VORON_SWITCHWIRE)/ and nozzle_diameter[0]==0.6
wipe_tower_extra_flow = 200%

[print:*CORE_XZ_08*]
default_acceleration = 2000
infill_acceleration = 4000
perimeter_acceleration = 2000
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 1000
travel_acceleration = 4000
first_layer_speed = 40
max_print_speed = 200
travel_speed = 300
compatible_printers_condition = printer_model=~/(VORON_SWITCHWIRE)/ and nozzle_diameter[0]==0.8

# CoreXY - 0.25mm Nozzle

[print:*CORE_XY_025*]
inherits = *CORE_XY*
first_layer_speed = 25
first_layer_infill_speed = 45
travel_acceleration = 4000
compatible_printers_condition = printer_model=~/(VORON2|VORON_TRIDENT|VORON_ZERO)/ and nozzle_diameter[0]==0.25

[print:*CORE_XY_DETAIL_0.05@0.25*]
inherits = *CORE_XY_DETAIL_0.07@0.25*
layer_height = 0.05
bottom_solid_layers = 10
top_solid_layers = 13
solid_infill_speed = 100
top_solid_infill_speed = 60
bridge_speed = 25

[print:*CORE_XY_DETAIL_0.07@0.25*]
inherits = *common_025*
layer_height = 0.07
bottom_solid_layers = 9
top_solid_layers = 11
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 60
small_perimeter_speed = 40
external_perimeter_speed = 40
top_solid_infill_speed = 60
gap_fill_speed = 40
support_material_speed = 60
external_perimeter_acceleration = 800
perimeter_acceleration = 1200
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2000
infill_acceleration = 2500
bridge_acceleration = 1000
default_acceleration = 1500
perimeter_extrusion_width = 0.25
external_perimeter_extrusion_width = 0.25
infill_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
solid_infill_speed = 140
bridge_speed = 30
support_material_threshold = 40

[print:*CORE_XY_SPEED_0.12@0.25*]
inherits = *common_025*
layer_height = 0.12
perimeter_speed = 150
external_perimeter_speed = 150
small_perimeter_speed = 150
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
support_material_contact_distance = 0.09
raft_contact_distance = 0.08
support_material_threshold = 40

[print:*CORE_XY_STRUCTURAL_0.12@0.25*]
inherits = *CORE_XY_SPEED_0.12@0.25*
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1000
perimeter_acceleration = 1500
infill_acceleration = 2500
solid_infill_acceleration = 2000

[print:*CORE_XY_SPEED_0.15@0.25*]
inherits = *CORE_XY_SPEED_0.12@0.25*
layer_height = 0.15
bottom_solid_layers = 7
top_solid_layers = 6

[print:*CORE_XY_STRUCTURAL_0.15@0.25*]
inherits = *CORE_XY_SPEED_0.15@0.25*
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1000
perimeter_acceleration = 1500

# CoreXY - 0.3mm Nozzle

[print:*CORE_XY_03*]
inherits = *CORE_XY*
first_layer_infill_speed = 60
compatible_printers_condition = printer_model=~/(VORON2|VORON_TRIDENT|VORON_ZERO)/ and nozzle_diameter[0]==0.3
top_solid_infill_acceleration = 1500

[print:*CORE_XY_STRUCTURAL_0.12@0.3*]
inherits = *common_03*
layer_height = 0.12
bottom_solid_layers = 6
top_solid_layers = 7
perimeter_speed = 80
small_perimeter_speed = 40
external_perimeter_speed = 40
infill_speed = 100
solid_infill_speed = 200
top_solid_infill_speed = 40
support_material_speed = 70
external_perimeter_acceleration = 1200
perimeter_acceleration = 1500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 1500
support_material_contact_distance = 0.12
raft_contact_distance = 0.12
support_material_threshold = 40

[print:*CORE_XY_STRUCTURAL_0.16@0.3*]
inherits = *CORE_XY_STRUCTURAL_0.12@0.3*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 6
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 120
top_solid_infill_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
support_material_contact_distance = 0.16
raft_contact_distance = 0.16

[print:*CORE_XY_SPEED_0.16@0.3*]
inherits = *CORE_XY_STRUCTURAL_0.16@0.3*
perimeter_speed = 160
small_perimeter_speed = 160
external_perimeter_speed = 160
support_material_speed = 100
support_material_interface_speed = 45%
external_perimeter_acceleration = 2500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000

[print:*CORE_XY_SPEED_0.20@0.3*]
inherits = *CORE_XY_SPEED_0.16@0.3*
layer_height = 0.2
bottom_solid_layers = 3
top_solid_layers = 5
support_material_contact_distance = 0.2
raft_contact_distance = 0.18

[print:*CORE_XY_STRUCTURAL_0.20@0.3*]
inherits = *CORE_XY_STRUCTURAL_0.16@0.3*
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5
support_material_contact_distance = 0.2
raft_contact_distance = 0.18

# CoreXY - 0.4mm Nozzle

[print:*CORE_XY_DETAIL_0.10@0.4*]
inherits = *CORE_XY_SPEED_0.15@0.4*
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
perimeter_speed = 145
external_perimeter_speed = 145
small_perimeter_speed = 145
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
infill_speed = 140
perimeters = 3
top_infill_extrusion_width = 0.4
bridge_speed = 40

[print:*CORE_XY_SPEED_0.15@0.4*]
inherits = *common*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 4
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
perimeter_speed = 170
external_perimeter_speed = 170
small_perimeter_speed = 170
gap_fill_speed = 120
support_material_speed = 120
support_material_interface_speed = 50
external_perimeter_acceleration = 2500
perimeter_acceleration = 3500
solid_infill_acceleration = 3500
top_solid_infill_acceleration = 1500
default_acceleration = 3000
overhang_speed_3 = 80%
bridge_speed = 45
first_layer_speed = 45

[print:*CORE_XY_SPEED_0.15@HF0.4*]
inherits = *CORE_XY_SPEED_0.15@0.4*
bottom_solid_layers = 4
perimeter_speed = 250
external_perimeter_speed = 200
small_perimeter_speed = 170
infill_speed = 250
solid_infill_speed = 250
top_solid_infill_acceleration = 2000
overhang_speed_3 = 70%
max_print_speed = 300
over_bridge_speed = 35%

[print:*CORE_XY_STRUCTURAL_0.15@0.4*]
inherits = *CORE_XY_STRUCTURAL_0.20@0.4*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
infill_speed = 110
bridge_speed = 45

[print:*CORE_XY_SPEED_0.20@0.4*]
inherits = *common*
top_solid_infill_acceleration = 1500
bottom_solid_layers = 3
first_layer_speed = 45
default_acceleration = 3000

[print:*CORE_XY_SPEED_0.20@HF0.4*]
inherits = *common*
bottom_solid_layers = 3
perimeter_speed = 250
external_perimeter_speed = 200
small_perimeter_speed = 170
infill_speed = 250
solid_infill_speed = 250
overhang_speed_3 = 70%
top_solid_infill_acceleration = 2000
max_print_speed = 300
over_bridge_speed = 35%
first_layer_speed = 45
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.20@0.4*]
inherits = *common*
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 120
solid_infill_speed = 140
gap_fill_speed = 60
top_solid_infill_speed = 80
support_material_speed = 120
support_material_interface_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
default_acceleration = 2500
overhang_speed_3 = 90%
first_layer_speed = 45
support_material_threshold = 40

[print:*CORE_XY_SPEED_0.25@HF0.4*]
inherits = *common*
layer_height = 0.25
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_speed = 220
external_perimeter_speed = 200
small_perimeter_speed = 170
infill_speed = 240
solid_infill_speed = 240
overhang_speed_3 = 70%
top_solid_infill_acceleration = 2000
max_print_speed = 300
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.4
support_material_contact_distance = 0.25
support_material_interface_layers = 3
over_bridge_speed = 35%
min_bead_width = 90%
default_acceleration = 3000
first_layer_speed = 45

[print:*CORE_XY_STRUCTURAL_0.25@HF0.4*]
inherits = *CORE_XY_STRUCTURAL_0.20@0.4*
layer_height = 0.25
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.4
support_material_contact_distance = 0.25

[print:*CORE_XY_DRAFT_0.28@HF0.4*]
inherits = *common*
layer_height = 0.28
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_speed = 200
external_perimeter_speed = 180
small_perimeter_speed = 180
solid_infill_speed = 200
first_layer_extrusion_width = 0.55
perimeter_extrusion_width = 0.55
external_perimeter_extrusion_width = 0.55
infill_extrusion_width = 0.55
solid_infill_extrusion_width = 0.55
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.4
top_solid_infill_acceleration = 2000
support_material_contact_distance = 0.28
support_material_interface_layers = 3
over_bridge_speed = 50%
min_bead_width = 95%
default_acceleration = 3000
first_layer_speed = 45

# CoreXY - 0.5mm Nozzle

[print:*CORE_XY_STRUCTURAL_0.10@0.5*]
inherits = *common_05*
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
perimeter_speed = 70
small_perimeter_speed = 40
external_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 200
top_solid_infill_speed = 70
bridge_speed = 30
gap_fill_speed = 40
support_material_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 3000
extrusion_width = 0.55
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_contact_distance = 0.2

[print:*CORE_XY_STRUCTURAL_0.15@0.5*]
inherits = *common_05*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
perimeter_speed = 80
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 180
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 50
support_material_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1200
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
support_material_contact_distance = 0.2

[print:*CORE_XY_SPEED_0.20@0.5*]
inherits = *common_05*
layer_height = 0.20
top_solid_layers = 5
bottom_solid_layers = 4
perimeter_speed = 140
small_perimeter_speed = 140
external_perimeter_speed = 140
infill_speed = 200
solid_infill_speed = 135
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 70
support_material_speed = 120
external_perimeter_acceleration = 2500
perimeter_acceleration = 3500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 3000
support_material_contact_distance = 0.2

[print:*CORE_XY_SPEED_0.20@HF0.5*]
inherits = *CORE_XY_SPEED_0.20@0.5*
bottom_solid_layers = 3
perimeter_speed = 200
small_perimeter_speed = 170
external_perimeter_speed = 200
infill_speed = 220
solid_infill_speed = 220
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
top_solid_infill_acceleration = 2000
over_bridge_speed = 40%
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.20@0.5*]
inherits = *CORE_XY_SPEED_0.20@0.5*
perimeter_speed = 80
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 120
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 70
support_material_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500

[print:*CORE_XY_SPEED_0.25@0.5*]
inherits = *CORE_XY_SPEED_0.20@0.5*
layer_height = 0.25
solid_infill_speed = 110
top_solid_layers = 4
bottom_solid_layers = 3
support_material_contact_distance = 0.25
raft_contact_distance = 0.25

[print:*CORE_XY_SPEED_0.25@HF0.5*]
inherits = *CORE_XY_SPEED_0.25@0.5*
perimeter_speed = 200
external_perimeter_speed = 200
small_perimeter_speed = 170
solid_infill_speed = 200
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
top_solid_infill_acceleration = 2000
over_bridge_speed = 40%
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.25@0.5*]
inherits = *CORE_XY_STRUCTURAL_0.20@0.5*
layer_height = 0.25
top_solid_layers = 4
bottom_solid_layers = 3
support_material_contact_distance = 0.25
solid_infill_speed = 110
raft_contact_distance = 0.25

[print:*CORE_XY_SPEED_0.32@HF0.5*]
inherits = *CORE_XY_SPEED_0.25@HF0.5*
layer_height = 0.32
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_speed = 160
external_perimeter_speed = 160
small_perimeter_speed = 160
solid_infill_speed = 160
over_bridge_speed = 40%
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.32@HF0.5*]
inherits = *CORE_XY_STRUCTURAL_0.25@0.5*
layer_height = 0.32
top_solid_layers = 4
bottom_solid_layers = 3

# CoreXY - 0.6mm Nozzle

[print:*CORE_XY_STRUCTURAL_0.15@0.6*]
inherits = *common_06*
layer_height = 0.15
bottom_solid_layers = 5
top_solid_layers = 6
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
solid_infill_speed = 160
infill_speed = 100
top_solid_infill_speed = 70
bridge_speed = 30
gap_fill_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.6
external_perimeter_extrusion_width = 0.6
infill_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
overhang_speed_3 = 80%

[print:*CORE_XY_SPEED_0.20@0.6*]
inherits = *common_06*
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 125
external_perimeter_speed = 125
small_perimeter_speed = 125
solid_infill_speed = 110
infill_speed = 110
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 80
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 3000
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.62
external_perimeter_extrusion_width = 0.62
infill_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
top_infill_extrusion_width = 0.5

[print:*CORE_XY_SPEED_0.20@HF0.6*]
inherits = *CORE_XY_SPEED_0.20@0.6*
bottom_solid_layers = 3
perimeter_speed = 200
external_perimeter_speed = 200
small_perimeter_speed = 170
solid_infill_speed = 200
infill_speed = 200
support_material_speed = 110
support_material_interface_speed = 50%
top_solid_infill_acceleration = 1500
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.20@0.6*]
inherits = *CORE_XY_SPEED_0.20@0.6*
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 100
solid_infill_speed = 110
top_solid_infill_speed = 70
bridge_speed = 30
gap_fill_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 2500
overhang_speed_3 = 80%

[print:*CORE_XY_SPEED_0.25@0.6*]
inherits = *common_06*
layer_height = 0.25
perimeter_speed = 90
external_perimeter_speed = 80
small_perimeter_speed = 80
infill_speed = 100
solid_infill_speed = 90
top_solid_infill_speed = 60
support_material_speed = 80
bridge_speed = 40
gap_fill_speed = 70
external_perimeter_acceleration = 2000
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 3000
support_material_contact_distance = 0.25

[print:*CORE_XY_SPEED_0.25@HF0.6*]
inherits = *CORE_XY_SPEED_0.25@0.6*
perimeter_speed = 180
external_perimeter_speed = 180
small_perimeter_speed = 170
infill_speed = 190
solid_infill_speed = 190
support_material_speed = 110
support_material_interface_speed = 50%
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
top_solid_infill_acceleration = 2000
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.25@0.6*]
inherits = *CORE_XY_SPEED_0.25@0.6*
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
top_solid_infill_speed = 60
bridge_speed = 30
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
overhang_speed_3 = 80%

[print:*CORE_XY_SPEED_0.32@0.6*]
inherits = *common_06*
layer_height = 0.32
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
external_perimeter_speed = 70
small_perimeter_speed = 70
infill_speed = 100
solid_infill_speed = 70
top_solid_infill_speed = 60
bridge_speed = 40
gap_fill_speed = 60
support_material_speed = 70
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 3000
support_material_contact_distance = 0.25

[print:*CORE_XY_STRUCTURAL_0.32@0.6*]
inherits = *CORE_XY_SPEED_0.32@0.6*
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
bridge_speed = 30
infill_speed = 70
solid_infill_speed = 70
overhang_speed_3 = 80%

[print:*CORE_XY_SPEED_0.32@HF0.6*]
inherits = *CORE_XY_SPEED_0.32@0.6*
perimeter_speed = 145
external_perimeter_speed = 145
small_perimeter_speed = 145
infill_speed = 145
solid_infill_speed = 140
top_solid_infill_speed = 60
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
support_material_speed = 110
support_material_interface_speed = 50%
default_acceleration = 3000

[print:*CORE_XY_STRUCTURAL_0.32@HF0.6*]
inherits = *CORE_XY_SPEED_0.32@0.6*
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
gap_fill_speed = 60
infill_speed = 120
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500

[print:*CORE_XY_SPEED_0.40@HF0.6*]
inherits = *common_06*
layer_height = 0.4
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_speed = 120
external_perimeter_speed = 115
small_perimeter_speed = 115
infill_speed = 130
solid_infill_speed = 120
top_solid_infill_speed = 60
support_material_speed = 110
support_material_interface_speed = 50%
bridge_speed = 40
gap_fill_speed = 60
external_perimeter_acceleration = 3000
perimeter_acceleration = 4000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 3000
support_material_contact_distance = 0.25
over_bridge_speed = 70%

[print:*CORE_XY_STRUCTURAL_0.40@HF0.6*]
inherits = *CORE_XY_SPEED_0.40@HF0.6*
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 60
bridge_speed = 30
gap_fill_speed = 60
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 2500
infill_acceleration = 3000

# CoreXY - 0.8mm Nozzle

[print:*CORE_XY_DETAIL_0.30@0.8*]
inherits = *common_08*
layer_height = 0.30
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 100
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 60
bridge_speed = 22
gap_fill_speed = 40
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 5000
infill_acceleration = 7000
bridge_acceleration = 1000
default_acceleration = 3000
top_infill_extrusion_width = 0.7
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0]

[print:*CORE_XY_SPEED_0.30@HF0.8*]
inherits = *CORE_XY_DETAIL_0.30@0.8*
perimeter_speed = 125
external_perimeter_speed = 125
small_perimeter_speed = 125
infill_speed = 130
solid_infill_speed = 125
top_solid_infill_speed = 80
support_material_speed = 110
gap_fill_speed = 80
external_perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
perimeter_acceleration = 3000
overhang_speed_2 = 20
overhang_speed_3 = 60%
over_bridge_speed = 60%
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

[print:*CORE_XY_STRUCTURAL_0.30@HF0.8*]
inherits = *CORE_XY_DETAIL_0.30@0.8*
perimeter_speed = 80
infill_speed = 120
solid_infill_speed = 120
gap_fill_speed = 60
top_solid_infill_acceleration = 1200
overhang_speed_2 = 20
top_solid_infill_speed = 60
support_material_speed = 80
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

[print:*CORE_XY_SPEED_0.40@0.8*]
inherits = *common_08*
layer_height = 0.4
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 50
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 90
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 50
bridge_speed = 22
gap_fill_speed = 35
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 5000
infill_acceleration = 7000
bridge_acceleration = 1000
default_acceleration = 3000
top_infill_extrusion_width = 0.75
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0]

[print:*CORE_XY_SPEED_0.40@HF0.8*]
inherits = *CORE_XY_SPEED_0.40@0.8*
perimeter_speed = 100
external_perimeter_speed = 90
small_perimeter_speed = 90
infill_speed = 105
solid_infill_speed = 100
top_solid_infill_speed = 75
support_material_speed = 90
gap_fill_speed = 65
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
over_bridge_speed = 70%
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

[print:*CORE_XY_STRUCTURAL_0.40@HF0.8*]
inherits = *CORE_XY_SPEED_0.40@0.8*
perimeter_speed = 80
infill_speed = 100
gap_fill_speed = 65
solid_infill_speed = 100
top_solid_infill_speed = 65
support_material_speed = 80
top_solid_infill_acceleration = 1200
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

[print:*CORE_XY_DRAFT_0.55@0.8*]
inherits = *common_08*
layer_height = 0.55
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 40
external_perimeter_speed = 35
small_perimeter_speed = 35
infill_speed = 60
solid_infill_speed = 35
top_solid_infill_speed = 30
support_material_speed = 35
bridge_speed = 22
gap_fill_speed = 30
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 5000
infill_acceleration = 7000
bridge_acceleration = 1000
default_acceleration = 3000
top_infill_extrusion_width = 0.75
perimeter_extrusion_width = 1
external_perimeter_extrusion_width = 1
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0]

[print:*CORE_XY_SPEED_0.55@HF0.8*]
inherits = *CORE_XY_DRAFT_0.55@0.8*
perimeter_speed = 75
external_perimeter_speed = 70
small_perimeter_speed = 70
infill_speed = 80
solid_infill_speed = 70
top_solid_infill_speed = 60
gap_fill_speed = 60
support_material_speed = 80
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
over_bridge_speed = 0
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

[print:*CORE_XY_STRUCTURAL_0.55@HF0.8*]
inherits = *CORE_XY_DRAFT_0.55@0.8*
perimeter_speed = 75
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 75
solid_infill_speed = 65
gap_fill_speed = 60
top_solid_infill_acceleration = 1200
top_solid_infill_speed = 45
support_material_speed = 65
compatible_printers_condition = printer_notes=~/.*(VORON2|VORON_TRIDENT|VORON_ZERO).*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

[print:*VORON_PRINTED_PARTS*]
bottom_fill_pattern = monotoniclines
bottom_solid_layers = 5
bottom_solid_min_thickness = 1
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0.4
extrusion_width = 0.4
fill_density = 40%
fill_pattern = grid
first_layer_extrusion_width = 0.4
infill_extrusion_width = 0.4
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeters = 4
solid_infill_extrusion_width = 0.4
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.4
top_solid_layers = 5
top_solid_min_thickness = 1

[print:*VORON_PRINTED_PARTS_HF*]
inherits = *VORON_PRINTED_PARTS*
perimeter_speed = 220
small_perimeter_speed = 170
external_perimeter_speed = 200
infill_speed = 240
solid_infill_speed = 240
first_layer_speed = 75
first_layer_infill_speed = 150
top_solid_infill_speed = 125
support_material_speed = 200
support_material_interface_speed = 100
bridge_speed = 70
over_bridge_speed = 50%
gap_fill_speed = 170
overhang_speed_3 = 70%
travel_speed = 350
max_print_speed = 300

external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 2000
solid_infill_acceleration = 5000
infill_acceleration = 5000
bridge_acceleration = 1500
first_layer_acceleration = 500
travel_acceleration = 7000
travel_short_distance_acceleration = 250
default_acceleration = 3000

# VORON2 - Shared

[print:*V2_025*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.25

[print:*V2_03*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.3

[print:*V2_04*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.4

[print:*V2_SF04*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[print:*V2_HF04*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.4 and nozzle_high_flow[0]

[print:*V2_05*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.5

[print:*V2_SF05*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[print:*V2_HF05*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.5 and nozzle_high_flow[0]

[print:*V2_06*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.6

[print:*V2_SF06*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[print:*V2_HF06*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0]

[print:*V2_08*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.8

[print:*V2_SF08*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[print:*V2_HF08*]
compatible_printers_condition = printer_notes=~/.*VORON2.*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

# VORON2 - 0.25mm nozzle

[print:0.05mm Detail @VORON2 - 0.25mm]
inherits = *CORE_XY_DETAIL_0.05@0.25*; *CORE_XY_025*; *V2_025*
external_perimeter_speed = 45
small_perimeter_speed = 45
gap_fill_speed = 45

[print:0.07mm Detail @VORON2 - 0.25mm]
inherits = *CORE_XY_DETAIL_0.07@0.25*; *CORE_XY_025*; *V2_025*
external_perimeter_speed = 45
small_perimeter_speed = 45
gap_fill_speed = 45

[print:0.12mm Standard @VORON2 - 0.25mm]
inherits = *CORE_XY_SPEED_0.12@0.25*; *CORE_XY_025*; *V2_025*
travel_acceleration = 6000

[print:0.12mm Strength @VORON2 - 0.25mm]
inherits = *CORE_XY_STRUCTURAL_0.12@0.25*; *CORE_XY_025*; *V2_025*
external_perimeter_speed = 45
small_perimeter_speed = 45
gap_fill_speed = 45

[print:0.15mm Standard @VORON2 - 0.25mm]
inherits = *CORE_XY_SPEED_0.15@0.25*; *CORE_XY_025*; *V2_025*
travel_acceleration = 6000

[print:0.15mm Strength @VORON2 - 0.25mm]
inherits = *CORE_XY_STRUCTURAL_0.15@0.25*; *CORE_XY_025*; *V2_025*
external_perimeter_speed = 45
small_perimeter_speed = 45
gap_fill_speed = 45

# VORON2 - 0.3mm nozzle

[print:0.12mm Strength @VORON2 - 0.3mm]
inherits = *CORE_XY_STRUCTURAL_0.12@0.3*; *CORE_XY_03*; *V2_03*
infill_acceleration = 5000
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45

[print:0.16mm Strength @VORON2 - 0.3mm]
inherits = *CORE_XY_STRUCTURAL_0.16@0.3*; *CORE_XY_03*; *V2_03*
infill_acceleration = 6000
perimeter_speed = 70
external_perimeter_speed = 50
small_perimeter_speed = 50

[print:0.16mm Standard @VORON2 - 0.3mm]
inherits = *CORE_XY_SPEED_0.16@0.3*; *CORE_XY_03*; *V2_03*
infill_acceleration = 6000
perimeter_acceleration = 3000

[print:0.20mm Standard @VORON2 - 0.3mm]
inherits = *CORE_XY_SPEED_0.20@0.3*; *CORE_XY_03*; *V2_03*
infill_acceleration = 6000
perimeter_acceleration = 3000

[print:0.20mm Strength @VORON2 - 0.3mm]
inherits = *CORE_XY_STRUCTURAL_0.20@0.3*; *CORE_XY_03*; *V2_03*
infill_acceleration = 6000
perimeter_speed = 70
external_perimeter_speed = 50
small_perimeter_speed = 50

# VORON2 - 0.4mm Nozzle

[print:0.10mm Detail @VORON2 - 0.4mm]
inherits = *CORE_XY_DETAIL_0.10@0.4*; *V2_04*
perimeter_acceleration = 3000
infill_acceleration = 6000
solid_infill_acceleration = 4000
support_material_threshold = 40

[print:0.15mm Standard @VORON2 - 0.4mm]
inherits = *CORE_XY_SPEED_0.15@0.4*; *V2_SF04*; *CORE_XY_SPEED*
overhang_speed_2 = 50

[print:0.15mm Standard @VORON2 - HF0.4mm]
inherits = *CORE_XY_SPEED_0.15@HF0.4*; *V2_HF04*; *CORE_XY_SPEED*
overhang_speed_2 = 50
infill_speed = 300

[print:0.15mm Strength @VORON2 - 0.4mm]
inherits = *CORE_XY_STRUCTURAL_0.15@0.4*; *V2_04*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45
infill_speed = 120
support_material_threshold = 40

[print:0.20mm Strength @VORON2 - 0.4mm]
inherits = *CORE_XY_STRUCTURAL_0.20@0.4*; *V2_04*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45

[print:0.20mm VORON Printed Parts @VORON2 - 0.4mm]
inherits = 0.20mm Strength @VORON2 - 0.4mm; *VORON_PRINTED_PARTS*

[print:0.20mm VORON Printed Parts (HF) @VORON2 - HF0.4mm]
inherits = 0.20mm Strength @VORON2 - 0.4mm; *V2_HF04*; *VORON_PRINTED_PARTS_HF*

[print:0.20mm Standard @VORON2 - 0.4mm]
inherits = *CORE_XY_SPEED_0.20@0.4*; *V2_SF04*; *CORE_XY_SPEED*
overhang_speed_2 = 50

[print:0.20mm Standard @VORON2 - HF0.4mm]
inherits = *CORE_XY_SPEED_0.20@HF0.4*; *V2_HF04*; *CORE_XY_SPEED*
overhang_speed_2 = 50
infill_speed = 300

[print:0.25mm Standard @VORON2 - HF0.4mm]
inherits = *CORE_XY_SPEED_0.25@HF0.4*; *V2_HF04*; *CORE_XY_SPEED*
overhang_speed_2 = 50
infill_speed = 300

[print:0.25mm Strength @VORON2 - HF0.4mm]
inherits = *CORE_XY_STRUCTURAL_0.25@HF0.4*; *V2_HF04*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45

[print:0.28mm Draft @VORON2 - HF0.4mm]
inherits = *CORE_XY_DRAFT_0.28@HF0.4*; *V2_HF04*; *CORE_XY_SPEED*
overhang_speed_2 = 50
support_material_threshold = 35
external_perimeter_acceleration = 3000
perimeter_acceleration = 6000
support_material_spacing = 2.5
infill_speed = 300

# VORON2 - 0.5mm nozzle

[print:0.10mm Strength @VORON2 - 0.5mm]
inherits = *CORE_XY_STRUCTURAL_0.10@0.5*; *V2_05*
perimeter_speed = 70
small_perimeter_speed = 50
external_perimeter_speed = 50

[print:0.15mm Strength @VORON2 - 0.5mm]
inherits = *CORE_XY_STRUCTURAL_0.15@0.5*; *V2_05*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45

[print:0.20mm Standard @VORON2 - 0.5mm]
inherits = *CORE_XY_SPEED_0.20@0.5*; *V2_SF05*; *CORE_XY_SPEED*
overhang_speed_2 = 50

[print:0.20mm Standard @VORON2 - HF0.5mm]
inherits = *CORE_XY_SPEED_0.20@HF0.5*; *V2_HF05*; *CORE_XY_SPEED*
overhang_speed_2 = 50

[print:0.20mm Strength @VORON2 - 0.5mm]
inherits = *CORE_XY_STRUCTURAL_0.20@0.5*; *V2_05*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45

[print:0.25mm Standard @VORON2 - 0.5mm]
inherits = *CORE_XY_SPEED_0.25@0.5*; *V2_SF05*; *CORE_XY_SPEED*
overhang_speed_2 = 50

[print:0.25mm Standard @VORON2 - HF0.5mm]
inherits = *CORE_XY_SPEED_0.25@HF0.5*; *V2_HF05*; *CORE_XY_SPEED*
overhang_speed_2 = 50

[print:0.25mm Strength @VORON2 - 0.5mm]
inherits = *CORE_XY_STRUCTURAL_0.25@0.5*; *V2_05*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45

[print:0.32mm Standard @VORON2 - HF0.5mm]
inherits = *CORE_XY_SPEED_0.32@HF0.5*; *V2_HF05*; *CORE_XY_SPEED*
overhang_speed_2 = 50
support_material_interface_speed = 50%

[print:0.32mm Strength @VORON2 - HF0.5mm]
inherits = *CORE_XY_STRUCTURAL_0.32@HF0.5*; *V2_HF05*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 45
support_material_speed = 120
support_material_interface_speed = 50%

# VORON2 - 0.6mm nozzle

[print:0.15mm Strength @VORON2 - 0.6mm]
inherits = *CORE_XY_STRUCTURAL_0.15@0.6*; *V2_06*; *CORE_XY_STRUCTURAL*
perimeter_speed = 70
overhang_speed_2 = 30
overhang_speed_3 = 70%
gap_fill_speed = 70

[print:0.20mm Standard @VORON2 - 0.6mm]
inherits = *CORE_XY_SPEED_0.20@0.6*; *V2_SF06*; *CORE_XY_SPEED*
overhang_speed_2 = 30
overhang_speed_3 = 70%
perimeter_speed = 130
external_perimeter_speed = 130
small_perimeter_speed = 130

[print:0.20mm Standard @VORON2 - HF0.6mm]
inherits = *CORE_XY_SPEED_0.20@HF0.6*; *V2_HF06*; *CORE_XY_SPEED*
overhang_speed_2 = 30
overhang_speed_3 = 70%

[print:0.20mm Strength @VORON2 - 0.6mm]
inherits = *CORE_XY_STRUCTURAL_0.20@0.6*; *V2_06*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 30

[print:0.25mm Standard @VORON2 - 0.6mm]
inherits = *CORE_XY_SPEED_0.25@0.6*; *V2_SF06*; *CORE_XY_SPEED*
overhang_speed_2 = 30
overhang_speed_3 = 70%
perimeter_speed = 95
external_perimeter_speed = 75
small_perimeter_speed = 75

[print:0.25mm Standard @VORON2 - HF0.6mm]
inherits = *CORE_XY_SPEED_0.25@HF0.6*; *V2_HF06*; *CORE_XY_SPEED*
overhang_speed_2 = 30
overhang_speed_3 = 70%

[print:0.25mm Strength @VORON2 - 0.6mm]
inherits = *CORE_XY_STRUCTURAL_0.25@0.6*; *V2_06*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 30

[print:0.32mm Standard @VORON2 - 0.6mm]
inherits = *CORE_XY_SPEED_0.32@0.6*; *V2_SF06*; *CORE_XY_SPEED*
overhang_speed_2 = 30
overhang_speed_3 = 70%

[print:0.32mm Strength @VORON2 - 0.6mm]
inherits = *CORE_XY_STRUCTURAL_0.32@0.6*; *V2_SF06*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 30

[print:0.32mm Standard @VORON2 - HF0.6mm]
inherits = *CORE_XY_SPEED_0.32@HF0.6*; *V2_HF06*; *CORE_XY_SPEED*
overhang_speed_2 = 35
overhang_speed_3 = 70%
top_solid_infill_acceleration = 2000

[print:0.32mm Strength @VORON2 - HF0.6mm]
inherits = *CORE_XY_STRUCTURAL_0.32@HF0.6*; *V2_HF06*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 35
support_material_speed = 110
support_material_interface_speed = 50%

[print:0.40mm Standard @VORON2 - HF0.6mm]
inherits = *CORE_XY_SPEED_0.40@HF0.6*; *V2_HF06*; *CORE_XY_SPEED*
overhang_speed_2 = 35
overhang_speed_3 = 70%
top_solid_infill_acceleration = 2000

[print:0.40mm Strength @VORON2 - HF0.6mm]
inherits = *CORE_XY_STRUCTURAL_0.40@HF0.6*; *V2_HF06*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 35

# VORON2 - 0.8mm nozzle

[print:0.30mm Detail @VORON2 - 0.8mm]
inherits = *CORE_XY_DETAIL_0.30@0.8*; *V2_SF08*
overhang_speed_2 = 35
top_solid_infill_acceleration = 2000
perimeter_acceleration = 2500
solid_infill_acceleration = 4000
infill_acceleration = 6000
gap_fill_speed = 45

[print:0.30mm Standard @VORON2 - HF0.8mm]
inherits = *CORE_XY_SPEED_0.30@HF0.8*; *V2_HF08*
overhang_speed_2 = 45
top_solid_infill_acceleration = 2000

[print:0.30mm Strength @VORON2 - HF0.8mm]
inherits = *CORE_XY_STRUCTURAL_0.30@HF0.8*; *V2_HF08*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 40
top_solid_infill_acceleration = 2000
support_material_speed = 100
support_material_interface_speed = 55%

[print:0.40mm Standard @VORON2 - 0.8mm]
inherits = *CORE_XY_SPEED_0.40@0.8*; *V2_SF08*
overhang_speed_2 = 35
top_solid_infill_acceleration = 2000
perimeter_acceleration = 2500
solid_infill_acceleration = 4000
infill_acceleration = 7000

[print:0.40mm Standard @VORON2 - HF0.8mm]
inherits = *CORE_XY_SPEED_0.40@HF0.8*; *V2_HF08*
overhang_speed_2 = 45
top_solid_infill_acceleration = 2000
external_perimeter_speed = 85
small_perimeter_speed = 85

[print:0.40mm Strength @VORON2 - HF0.8mm]
inherits = *CORE_XY_STRUCTURAL_0.40@HF0.8*; *V2_HF08*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 40
top_solid_infill_acceleration = 2000

[print:0.55mm Draft @VORON2 - 0.8mm]
inherits = *CORE_XY_DRAFT_0.55@0.8*; *V2_SF08*
top_solid_infill_acceleration = 2000
perimeter_acceleration = 2500
solid_infill_acceleration = 4000
infill_acceleration = 7000
perimeter_speed = 45

[print:0.55mm Standard @VORON2 - HF0.8mm]
inherits = *CORE_XY_SPEED_0.55@HF0.8*; *V2_HF08*
overhang_speed_2 = 45
top_solid_infill_acceleration = 2000

[print:0.55mm Strength @VORON2 - HF0.8mm]
inherits = *CORE_XY_STRUCTURAL_0.55@HF0.8*; *V2_HF08*; *CORE_XY_STRUCTURAL*
overhang_speed_2 = 40
top_solid_infill_acceleration = 2000

# VORON Trident - Shared

[print:*VT_025*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.25

[print:*VT_03*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.3

[print:*VT_04*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.4

[print:*VT_SF04*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[print:*VT_HF04*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.4 and nozzle_high_flow[0]

[print:*VT_05*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.5

[print:*VT_SF05*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[print:*VT_HF05*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.5 and nozzle_high_flow[0]

[print:*VT_06*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.6

[print:*VT_SF06*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[print:*VT_HF06*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0]

[print:*VT_08*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.8

[print:*VT_SF08*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[print:*VT_HF08*]
compatible_printers_condition = printer_notes=~/.*VORON_TRIDENT.*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

# VORON Trident - 0.25mm nozzle

[print:0.05mm Detail @TRIDENT - 0.25mm]
inherits = 0.05mm Detail @VORON2 - 0.25mm; *VT_025*

[print:0.07mm Detail @TRIDENT - 0.25mm]
inherits = 0.07mm Detail @VORON2 - 0.25mm; *VT_025*

[print:0.12mm Standard @TRIDENT - 0.25mm]
inherits = 0.12mm Standard @VORON2 - 0.25mm; *VT_025*

[print:0.12mm Strength @TRIDENT - 0.25mm]
inherits = 0.12mm Strength @VORON2 - 0.25mm; *VT_025*

[print:0.15mm Standard @TRIDENT - 0.25mm]
inherits = 0.15mm Standard @VORON2 - 0.25mm; *VT_025*

[print:0.15mm Strength @TRIDENT - 0.25mm]
inherits = 0.15mm Strength @VORON2 - 0.25mm; *VT_025*

# VORON Trident - 0.3mm nozzle

[print:0.12mm Strength @TRIDENT - 0.3mm]
inherits = 0.12mm Strength @VORON2 - 0.3mm; *VT_03*

[print:0.16mm Strength @TRIDENT - 0.3mm]
inherits = 0.16mm Strength @VORON2 - 0.3mm; *VT_03*

[print:0.16mm Standard @TRIDENT - 0.3mm]
inherits = 0.16mm Standard @VORON2 - 0.3mm; *VT_03*

[print:0.20mm Standard @TRIDENT - 0.3mm]
inherits = 0.20mm Standard @VORON2 - 0.3mm; *VT_03*

[print:0.20mm Strength @TRIDENT - 0.3mm]
inherits = 0.20mm Strength @VORON2 - 0.3mm; *VT_03*

# VORON Trident - 0.4mm Nozzle

[print:0.10mm Detail @TRIDENT - 0.4mm]
inherits = 0.10mm Detail @VORON2 - 0.4mm; *VT_04*

[print:0.15mm Standard @TRIDENT - 0.4mm]
inherits = 0.15mm Standard @VORON2 - 0.4mm; *VT_SF04*

[print:0.15mm Standard @TRIDENT - HF0.4mm]
inherits = 0.15mm Standard @VORON2 - HF0.4mm; *VT_HF04*

[print:0.15mm Strength @TRIDENT - 0.4mm]
inherits = 0.15mm Strength @VORON2 - 0.4mm; *VT_04*

[print:0.20mm Strength @TRIDENT - 0.4mm]
inherits = 0.20mm Strength @VORON2 - 0.4mm; *VT_04*

[print:0.20mm VORON Printed Parts @TRIDENT - 0.4mm]
inherits = 0.20mm Strength @TRIDENT - 0.4mm; *VORON_PRINTED_PARTS*

[print:0.20mm VORON Printed Parts (HF) @TRIDENT - HF0.4mm]
inherits = 0.20mm Strength @TRIDENT - 0.4mm; *VT_HF04*; *VORON_PRINTED_PARTS_HF*

[print:0.20mm Standard @TRIDENT - 0.4mm]
inherits = 0.20mm Standard @VORON2 - 0.4mm; *VT_SF04*

[print:0.20mm Standard @TRIDENT - HF0.4mm]
inherits = 0.20mm Standard @VORON2 - HF0.4mm; *VT_HF04*

[print:0.25mm Standard @TRIDENT - HF0.4mm]
inherits = 0.25mm Standard @VORON2 - HF0.4mm; *VT_HF04*

[print:0.25mm Strength @TRIDENT - HF0.4mm]
inherits = 0.25mm Strength @VORON2 - HF0.4mm; *VT_HF04*

[print:0.28mm Draft @TRIDENT - HF0.4mm]
inherits = 0.28mm Draft @VORON2 - HF0.4mm; *VT_HF04*

# VORON Trident - 0.5mm nozzle

[print:0.10mm Strength @TRIDENT - 0.5mm]
inherits = 0.10mm Strength @VORON2 - 0.5mm; *VT_05*

[print:0.15mm Strength @TRIDENT - 0.5mm]
inherits = 0.15mm Strength @VORON2 - 0.5mm; *VT_05*

[print:0.20mm Standard @TRIDENT - 0.5mm]
inherits = 0.20mm Standard @VORON2 - 0.5mm; *VT_SF05*

[print:0.20mm Standard @TRIDENT - HF0.5mm]
inherits = 0.20mm Standard @VORON2 - HF0.5mm; *VT_HF05*

[print:0.20mm Strength @TRIDENT - 0.5mm]
inherits = 0.20mm Strength @VORON2 - 0.5mm; *VT_05*

[print:0.25mm Standard @TRIDENT - 0.5mm]
inherits = 0.25mm Standard @VORON2 - 0.5mm; *VT_SF05*

[print:0.25mm Standard @TRIDENT - HF0.5mm]
inherits = 0.25mm Standard @VORON2 - HF0.5mm; *VT_HF05*

[print:0.25mm Strength @TRIDENT - 0.5mm]
inherits = 0.25mm Strength @VORON2 - 0.5mm; *VT_05*

[print:0.32mm Standard @TRIDENT - HF0.5mm]
inherits = 0.32mm Standard @VORON2 - HF0.5mm; *VT_HF05*

[print:0.32mm Strength @TRIDENT - HF0.5mm]
inherits = 0.32mm Strength @VORON2 - HF0.5mm; *VT_HF05*

# VORON Trident - 0.6mm nozzle

[print:0.15mm Strength @TRIDENT - 0.6mm]
inherits = 0.15mm Strength @VORON2 - 0.6mm; *VT_06*

[print:0.20mm Standard @TRIDENT - 0.6mm]
inherits = 0.20mm Standard @VORON2 - 0.6mm; *VT_SF06*

[print:0.20mm Standard @TRIDENT - HF0.6mm]
inherits = 0.20mm Standard @VORON2 - HF0.6mm; *VT_HF06*

[print:0.20mm Strength @TRIDENT - 0.6mm]
inherits = 0.20mm Strength @VORON2 - 0.6mm; *VT_06*

[print:0.25mm Standard @TRIDENT - 0.6mm]
inherits = 0.25mm Standard @VORON2 - 0.6mm; *VT_SF06*

[print:0.25mm Standard @TRIDENT - HF0.6mm]
inherits = 0.25mm Standard @VORON2 - HF0.6mm; *VT_HF06*

[print:0.25mm Strength @TRIDENT - 0.6mm]
inherits = 0.25mm Strength @VORON2 - 0.6mm; *VT_06*

[print:0.32mm Standard @TRIDENT - 0.6mm]
inherits = 0.32mm Standard @VORON2 - 0.6mm; *VT_SF06*

[print:0.32mm Strength @TRIDENT - 0.6mm]
inherits = 0.32mm Strength @VORON2 - 0.6mm; *VT_SF06*

[print:0.32mm Standard @TRIDENT - HF0.6mm]
inherits = 0.32mm Standard @VORON2 - HF0.6mm; *VT_HF06*

[print:0.32mm Strength @TRIDENT - HF0.6mm]
inherits = 0.32mm Strength @VORON2 - HF0.6mm; *VT_HF06*

[print:0.40mm Standard @TRIDENT - HF0.6mm]
inherits = 0.40mm Standard @VORON2 - HF0.6mm; *VT_HF06*

[print:0.40mm Strength @TRIDENT - HF0.6mm]
inherits = 0.40mm Strength @VORON2 - HF0.6mm; *VT_HF06*

# VORON Trident - 0.8mm nozzle

[print:0.30mm Detail @TRIDENT - 0.8mm]
inherits = 0.30mm Detail @VORON2 - 0.8mm; *VT_SF08*

[print:0.30mm Standard @TRIDENT - HF0.8mm]
inherits = 0.30mm Standard @VORON2 - HF0.8mm; *VT_HF08*

[print:0.30mm Strength @TRIDENT - HF0.8mm]
inherits = 0.30mm Strength @VORON2 - HF0.8mm; *VT_HF08*

[print:0.40mm Standard @TRIDENT - 0.8mm]
inherits = 0.40mm Standard @VORON2 - 0.8mm; *VT_SF08*

[print:0.40mm Standard @TRIDENT - HF0.8mm]
inherits = 0.40mm Standard @VORON2 - HF0.8mm; *VT_HF08*

[print:0.40mm Strength @TRIDENT - HF0.8mm]
inherits = 0.40mm Strength @VORON2 - HF0.8mm; *VT_HF08*

[print:0.55mm Draft @TRIDENT - 0.8mm]
inherits = 0.55mm Draft @VORON2 - 0.8mm; *VT_SF08*

[print:0.55mm Standard @TRIDENT - HF0.8mm]
inherits = 0.55mm Standard @VORON2 - HF0.8mm; *VT_HF08*

[print:0.55mm Strength @TRIDENT - HF0.8mm]
inherits = 0.55mm Strength @VORON2 - HF0.8mm; *VT_HF08*

# VORON Zero - Shared

[print:*V0_025*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.25

[print:*V0_03*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.3

[print:*V0_04*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.4

[print:*V0_SF04*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[print:*V0_HF04*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.4 and nozzle_high_flow[0]

[print:*V0_05*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.5

[print:*V0_SF05*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[print:*V0_HF05*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.5 and nozzle_high_flow[0]

[print:*V0_06*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.6

[print:*V0_SF06*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[print:*V0_HF06*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0]

[print:*V0_08*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.8

[print:*V0_SF08*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[print:*V0_HF08*]
compatible_printers_condition = printer_notes=~/.*VORON_ZERO.*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

# VORON Zero - 0.25mm nozzle

[print:0.05mm Detail @V0 - 0.25mm]
inherits = 0.05mm Detail @VORON2 - 0.25mm; *V0_025*

[print:0.07mm Detail @V0 - 0.25mm]
inherits = 0.07mm Detail @VORON2 - 0.25mm; *V0_025*

[print:0.12mm Standard @V0 - 0.25mm]
inherits = 0.12mm Standard @VORON2 - 0.25mm; *V0_025*

[print:0.12mm Strength @V0 - 0.25mm]
inherits = 0.12mm Strength @VORON2 - 0.25mm; *V0_025*

[print:0.15mm Standard @V0 - 0.25mm]
inherits = 0.15mm Standard @VORON2 - 0.25mm; *V0_025*

[print:0.15mm Strength @V0 - 0.25mm]
inherits = 0.15mm Strength @VORON2 - 0.25mm; *V0_025*

# VORON Zero - 0.3mm nozzle

[print:0.12mm Strength @V0 - 0.3mm]
inherits = 0.12mm Strength @VORON2 - 0.3mm; *V0_03*

[print:0.16mm Strength @V0 - 0.3mm]
inherits = 0.16mm Strength @VORON2 - 0.3mm; *V0_03*

[print:0.16mm Standard @V0 - 0.3mm]
inherits = 0.16mm Standard @VORON2 - 0.3mm; *V0_03*

[print:0.20mm Standard @V0 - 0.3mm]
inherits = 0.20mm Standard @VORON2 - 0.3mm; *V0_03*

[print:0.20mm Strength @V0 - 0.3mm]
inherits = 0.20mm Strength @VORON2 - 0.3mm; *V0_03*

# VORON Zero - 0.4mm Nozzle

[print:0.10mm Detail @V0 - 0.4mm]
inherits = 0.10mm Detail @VORON2 - 0.4mm; *V0_04*

[print:0.15mm Standard @V0 - 0.4mm]
inherits = 0.15mm Standard @VORON2 - 0.4mm; *V0_SF04*

[print:0.15mm Standard @V0 - HF0.4mm]
inherits = 0.15mm Standard @VORON2 - HF0.4mm; *V0_HF04*

[print:0.15mm Strength @V0 - 0.4mm]
inherits = 0.15mm Strength @VORON2 - 0.4mm; *V0_04*

[print:0.20mm Strength @V0 - 0.4mm]
inherits = 0.20mm Strength @VORON2 - 0.4mm; *V0_04*

[print:0.20mm VORON Printed Parts @V0 - 0.4mm]
inherits = 0.20mm Strength @V0 - 0.4mm; *VORON_PRINTED_PARTS*

[print:0.20mm VORON Printed Parts (HF) @V0 - HF0.4mm]
inherits = 0.20mm Strength @V0 - 0.4mm; *V0_HF04*; *VORON_PRINTED_PARTS_HF*

[print:0.20mm Standard @V0 - 0.4mm]
inherits = 0.20mm Standard @VORON2 - 0.4mm; *V0_SF04*

[print:0.20mm Standard @V0 - HF0.4mm]
inherits = 0.20mm Standard @VORON2 - HF0.4mm; *V0_HF04*

[print:0.25mm Standard @V0 - HF0.4mm]
inherits = 0.25mm Standard @VORON2 - HF0.4mm; *V0_HF04*

[print:0.25mm Strength @V0 - HF0.4mm]
inherits = 0.25mm Strength @VORON2 - HF0.4mm; *V0_HF04*

[print:0.28mm Draft @V0 - HF0.4mm]
inherits = 0.28mm Draft @VORON2 - HF0.4mm; *V0_HF04*

# VORON Zero - 0.5mm nozzle

[print:0.10mm Strength @V0 - 0.5mm]
inherits = 0.10mm Strength @VORON2 - 0.5mm; *V0_05*

[print:0.15mm Strength @V0 - 0.5mm]
inherits = 0.15mm Strength @VORON2 - 0.5mm; *V0_05*

[print:0.20mm Standard @V0 - 0.5mm]
inherits = 0.20mm Standard @VORON2 - 0.5mm; *V0_SF05*

[print:0.20mm Standard @V0 - HF0.5mm]
inherits = 0.20mm Standard @VORON2 - HF0.5mm; *V0_HF05*

[print:0.20mm Strength @V0 - 0.5mm]
inherits = 0.20mm Strength @VORON2 - 0.5mm; *V0_05*

[print:0.25mm Standard @V0 - 0.5mm]
inherits = 0.25mm Standard @VORON2 - 0.5mm; *V0_SF05*

[print:0.25mm Standard @V0 - HF0.5mm]
inherits = 0.25mm Standard @VORON2 - HF0.5mm; *V0_HF05*

[print:0.25mm Strength @V0 - 0.5mm]
inherits = 0.25mm Strength @VORON2 - 0.5mm; *V0_05*

[print:0.32mm Standard @V0 - HF0.5mm]
inherits = 0.32mm Standard @VORON2 - HF0.5mm; *V0_HF05*

[print:0.32mm Strength @V0 - HF0.5mm]
inherits = 0.32mm Strength @VORON2 - HF0.5mm; *V0_HF05*

# VORON Zero - 0.6mm nozzle

[print:0.15mm Strength @V0 - 0.6mm]
inherits = 0.15mm Strength @VORON2 - 0.6mm; *V0_06*

[print:0.20mm Standard @V0 - 0.6mm]
inherits = 0.20mm Standard @VORON2 - 0.6mm; *V0_SF06*

[print:0.20mm Standard @V0 - HF0.6mm]
inherits = 0.20mm Standard @VORON2 - HF0.6mm; *V0_HF06*

[print:0.20mm Strength @V0 - 0.6mm]
inherits = 0.20mm Strength @VORON2 - 0.6mm; *V0_06*

[print:0.25mm Standard @V0 - 0.6mm]
inherits = 0.25mm Standard @VORON2 - 0.6mm; *V0_SF06*

[print:0.25mm Standard @V0 - HF0.6mm]
inherits = 0.25mm Standard @VORON2 - HF0.6mm; *V0_HF06*

[print:0.25mm Strength @V0 - 0.6mm]
inherits = 0.25mm Strength @VORON2 - 0.6mm; *V0_06*

[print:0.32mm Standard @V0 - 0.6mm]
inherits = 0.32mm Standard @VORON2 - 0.6mm; *V0_SF06*

[print:0.32mm Strength @V0 - 0.6mm]
inherits = 0.32mm Strength @VORON2 - 0.6mm; *V0_SF06*

[print:0.32mm Standard @V0 - HF0.6mm]
inherits = 0.32mm Standard @VORON2 - HF0.6mm; *V0_HF06*

[print:0.32mm Strength @V0 - HF0.6mm]
inherits = 0.32mm Strength @VORON2 - HF0.6mm; *V0_HF06*

[print:0.40mm Standard @V0 - HF0.6mm]
inherits = 0.40mm Standard @VORON2 - HF0.6mm; *V0_HF06*

[print:0.40mm Strength @V0 - HF0.6mm]
inherits = 0.40mm Strength @VORON2 - HF0.6mm; *V0_HF06*

# VORON Zero - 0.8mm nozzle

[print:0.30mm Detail @V0 - 0.8mm]
inherits = 0.30mm Detail @VORON2 - 0.8mm; *V0_SF08*

[print:0.30mm Standard @V0 - HF0.8mm]
inherits = 0.30mm Standard @VORON2 - HF0.8mm; *V0_HF08*

[print:0.30mm Strength @V0 - HF0.8mm]
inherits = 0.30mm Strength @VORON2 - HF0.8mm; *V0_HF08*

[print:0.40mm Standard @V0 - 0.8mm]
inherits = 0.40mm Standard @VORON2 - 0.8mm; *V0_SF08*

[print:0.40mm Standard @V0 - HF0.8mm]
inherits = 0.40mm Standard @VORON2 - HF0.8mm; *V0_HF08*

[print:0.40mm Strength @V0 - HF0.8mm]
inherits = 0.40mm Strength @VORON2 - HF0.8mm; *V0_HF08*

[print:0.55mm Draft @V0 - 0.8mm]
inherits = 0.55mm Draft @VORON2 - 0.8mm; *V0_SF08*

[print:0.55mm Standard @V0 - HF0.8mm]
inherits = 0.55mm Standard @VORON2 - HF0.8mm; *V0_HF08*

[print:0.55mm Strength @V0 - HF0.8mm]
inherits = 0.55mm Strength @VORON2 - HF0.8mm; *V0_HF08*

# VORON Switchwire - Shared

[print:*VSW_025*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.25

[print:*VSW_03*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.3

[print:*VSW_04*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.4

[print:*VSW_SF04*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[print:*VSW_HF04*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.4 and nozzle_high_flow[0]

[print:*VSW_05*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.5

[print:*VSW_SF05*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[print:*VSW_HF05*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.5 and nozzle_high_flow[0]

[print:*VSW_06*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.6

[print:*VSW_SF06*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[print:*VSW_HF06*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0]

[print:*VSW_08*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.8

[print:*VSW_SF08*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[print:*VSW_HF08*]
compatible_printers_condition = printer_notes=~/.*VORON_SWITCHWIRE.*/ and nozzle_diameter[0]==0.8 and nozzle_high_flow[0]

# VORON Switchwire - 0.25mm nozzle

[print:0.05mm Detail @SWITCHWIRE - 0.25mm]
inherits = 0.05mm Detail @VORON2 - 0.25mm; *CORE_XZ_025*; *VSW_025*

[print:0.07mm Detail @SWITCHWIRE - 0.25mm]
inherits = 0.07mm Detail @VORON2 - 0.25mm; *CORE_XZ_025*; *VSW_025*

[print:0.12mm Standard @SWITCHWIRE - 0.25mm]
inherits = 0.12mm Standard @VORON2 - 0.25mm; *CORE_XZ_025*; *VSW_025*
default_acceleration = 2000
external_perimeter_speed = 120
gap_fill_speed = 50
small_perimeter_speed = 120
perimeter_speed = 120

[print:0.12mm Strength @SWITCHWIRE - 0.25mm]
inherits = 0.12mm Strength @VORON2 - 0.25mm; *CORE_XZ_025*; *VSW_025*
default_acceleration = 2000
gap_fill_speed = 50

[print:0.15mm Standard @SWITCHWIRE - 0.25mm]
inherits = 0.15mm Standard @VORON2 - 0.25mm; *CORE_XZ_025*; *VSW_025*
default_acceleration = 2000
external_perimeter_speed = 120
gap_fill_speed = 50
perimeter_speed = 120
small_perimeter_speed = 120

[print:0.15mm Strength @SWITCHWIRE - 0.25mm]
inherits = 0.15mm Strength @VORON2 - 0.25mm; *CORE_XZ_025*; *VSW_025*
default_acceleration = 2000
gap_fill_speed = 50

# VORON Switchwire - 0.3mm nozzle

[print:0.12mm Strength @SWITCHWIRE - 0.3mm]
inherits = 0.12mm Strength @VORON2 - 0.3mm; *CORE_XZ_03*; *VSW_03*
default_acceleration = 1500
external_perimeter_acceleration = 1200
solid_infill_acceleration = 2500
perimeter_acceleration = 1500
infill_acceleration = 3000
external_perimeter_speed = 40
small_perimeter_speed = 40
support_material_interface_speed = 75%

[print:0.16mm Strength @SWITCHWIRE - 0.3mm]
inherits = 0.16mm Strength @VORON2 - 0.3mm; *CORE_XZ_03*; *VSW_03*
support_material_interface_speed = 75%

[print:0.16mm Standard @SWITCHWIRE - 0.3mm]
inherits = 0.16mm Standard @VORON2 - 0.3mm; *CORE_XZ_03*; *VSW_03*
external_perimeter_acceleration = 2500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
external_perimeter_speed = 120
perimeter_speed = 140
small_perimeter_speed = 120
support_material_speed = 100

[print:0.20mm Standard @SWITCHWIRE - 0.3mm]
inherits = 0.20mm Standard @VORON2 - 0.3mm; *CORE_XZ_03*; *VSW_03*
external_perimeter_acceleration = 2500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
external_perimeter_speed = 120
perimeter_speed = 140
small_perimeter_speed = 120
support_material_speed = 100

[print:0.20mm Strength @SWITCHWIRE - 0.3mm]
inherits = 0.20mm Strength @VORON2 - 0.3mm; *CORE_XZ_03*; *VSW_03*
support_material_interface_speed = 75%

# VORON Switchwire - 0.4mm Nozzle

[print:0.10mm Detail @SWITCHWIRE - 0.4mm]
inherits = 0.10mm Detail @VORON2 - 0.4mm; *CORE_XZ_04*; *VSW_04*
bridge_acceleration = 700
bridge_speed = 20
default_acceleration = 1000
external_perimeter_acceleration = 500
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 25
first_layer_acceleration = 600
first_layer_infill_speed = 0
first_layer_speed = 20
gap_fill_speed = 40
gcode_resolution = 0.006
infill_acceleration = 1500
infill_extrusion_width = 0.4
infill_speed = 80
max_print_speed = 200
over_bridge_speed = 0
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
perimeter_acceleration = 700
perimeter_extrusion_width = 0.4
perimeter_speed = 45
skirt_distance = 2
skirt_height = 3
small_perimeter_speed = 25
solid_infill_acceleration = 1250
solid_infill_extrusion_width = 0.4
solid_infill_speed = 80
support_material_extrusion_width = 0.35
support_material_interface_pattern = rectilinear
support_material_interface_speed = 85%
support_material_speed = 40
support_material_threshold = 45
support_tree_angle_slow = 30
support_tree_branch_diameter_angle = 3
support_tree_branch_diameter_double_wall = 3
top_solid_infill_acceleration = 800
top_solid_infill_speed = 35
travel_acceleration = 0
travel_short_distance_acceleration = 0
travel_speed = 200
wipe_tower_cone_angle = 0
wipe_tower_extra_flow = 100%
wipe_tower_extra_spacing = 100%

[print:0.15mm Standard @SWITCHWIRE - 0.4mm]
inherits = 0.15mm Standard @VORON2 - 0.4mm; *CORE_XZ_04*; *VSW_SF04*
default_acceleration = 3000
external_perimeter_acceleration = 2500
infill_acceleration = 4000
perimeter_acceleration = 3500
solid_infill_acceleration = 3500
top_solid_infill_acceleration = 1500
travel_acceleration = 4000
first_layer_speed = 40
bridge_speed = 45
support_material_interface_speed = 50
max_print_speed = 200
travel_speed = 300

[print:0.15mm Standard @SWITCHWIRE - HF0.4mm]
inherits = 0.15mm Standard @VORON2 - HF0.4mm; *CORE_XZ_04*; *VSW_HF04*
bridge_speed = 45
external_perimeter_speed = 200
infill_speed = 250
perimeter_speed = 250
support_material_interface_speed = 50
default_acceleration = 3000
external_perimeter_acceleration = 2500
perimeter_acceleration = 3500
solid_infill_acceleration = 3500
top_solid_infill_acceleration = 2000
max_print_speed = 250
overhang_speed_0 = 15
overhang_speed_1 = 25

[print:0.15mm Strength @SWITCHWIRE - 0.4mm]
inherits = 0.15mm Strength @VORON2 - 0.4mm; *CORE_XZ_04*; *VSW_04*
default_acceleration = 2500
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 1200
bridge_speed = 45
gap_fill_speed = 60
external_perimeter_speed = 45
infill_speed = 110
perimeter_speed = 80
small_perimeter_speed = 45
support_material_interface_speed = 50
top_solid_infill_speed = 80

[print:0.20mm Standard @SWITCHWIRE - 0.4mm]
inherits = 0.20mm Standard @VORON2 - 0.4mm; *CORE_XZ_04*; *VSW_SF04*

[print:0.20mm Strength @SWITCHWIRE - 0.4mm]
inherits = 0.20mm Strength @VORON2 - 0.4mm; *CORE_XZ_04*; *VSW_04*
default_acceleration = 2500
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 1200
external_perimeter_speed = 45
gap_fill_speed = 60
infill_speed = 120
perimeter_speed = 80
small_perimeter_speed = 45
support_material_interface_speed = 50
top_solid_infill_speed = 80

[print:0.20mm VORON Printed Parts @SWITCHWIRE - 0.4mm]
inherits = 0.20mm Strength @SWITCHWIRE - 0.4mm; *VORON_PRINTED_PARTS*

[print:0.20mm VORON Printed Parts (HF) @SWITCHWIRE - HF0.4mm]
inherits = 0.20mm Strength @SWITCHWIRE - 0.4mm; *VSW_HF04*; *VORON_PRINTED_PARTS_HF*

[print:0.20mm Standard @SWITCHWIRE - HF0.4mm]
inherits = 0.20mm Standard @VORON2 - HF0.4mm; *CORE_XZ_04*; *VSW_HF04*
top_solid_infill_acceleration = 2000
external_perimeter_speed = 200
infill_speed = 250
perimeter_speed = 250
max_print_speed = 250

[print:0.25mm Standard @SWITCHWIRE - HF0.4mm]
inherits = 0.25mm Standard @VORON2 - HF0.4mm; *CORE_XZ_04*; *VSW_HF04*
external_perimeter_speed = 200
infill_speed = 240
perimeter_speed = 220
max_print_speed = 250
top_solid_infill_acceleration = 2000

[print:0.25mm Strength @SWITCHWIRE - HF0.4mm]
inherits = 0.25mm Strength @VORON2 - HF0.4mm; *CORE_XZ_04*; *VSW_HF04*
default_acceleration = 2500
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 1200
external_perimeter_speed = 45
gap_fill_speed = 60
infill_speed = 120
perimeter_speed = 80
small_perimeter_speed = 45
support_material_interface_speed = 50
top_solid_infill_speed = 80

[print:0.28mm Draft @SWITCHWIRE - HF0.4mm]
inherits = 0.28mm Draft @VORON2 - HF0.4mm; *CORE_XZ_04*; *VSW_HF04*
external_perimeter_speed = 180
perimeter_speed = 200
small_perimeter_speed = 180
top_solid_infill_acceleration = 2000
support_material_spacing = 2

# VORON Switchwire - 0.5mm nozzle

[print:0.10mm Strength @SWITCHWIRE - 0.5mm]
inherits = 0.10mm Strength @VORON2 - 0.5mm; *CORE_XZ_05*; *VSW_05*
default_acceleration = 2000
travel_acceleration = 4000
external_perimeter_speed = 40
small_perimeter_speed = 40

[print:0.15mm Strength @SWITCHWIRE - 0.5mm]
inherits = 0.15mm Strength @VORON2 - 0.5mm; *CORE_XZ_05*; *VSW_05*
default_acceleration = 2000
infill_acceleration = 4000
perimeter_acceleration = 2000
solid_infill_acceleration = 2500
top_solid_infill_acceleration = 1200
travel_acceleration = 4000
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45

[print:0.20mm Standard @SWITCHWIRE - 0.5mm]
inherits = 0.20mm Standard @VORON2 - 0.5mm; *CORE_XZ_05*; *VSW_SF05*
default_acceleration = 2500
external_perimeter_acceleration = 2500
infill_acceleration = 4000
perimeter_acceleration = 3500
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 1000
travel_acceleration = 4000

[print:0.20mm Standard @SWITCHWIRE - HF0.5mm]
inherits = 0.20mm Standard @VORON2 - HF0.5mm; *CORE_XZ_05*; *VSW_HF05*
default_acceleration = 2500
external_perimeter_acceleration = 4000
infill_acceleration = 4000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
travel_acceleration = 4000

[print:0.20mm Strength @SWITCHWIRE - 0.5mm]
inherits = 0.20mm Strength @VORON2 - 0.5mm; *CORE_XZ_05*; *VSW_05*
default_acceleration = 2500
infill_acceleration = 4000
perimeter_acceleration = 2000
solid_infill_acceleration = 2500
top_solid_infill_acceleration = 1000
travel_acceleration = 4000
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45

[print:0.25mm Standard @SWITCHWIRE - 0.5mm]
inherits = 0.25mm Standard @VORON2 - 0.5mm; *CORE_XZ_05*; *VSW_SF05*
default_acceleration = 2500
external_perimeter_acceleration = 2500
infill_acceleration = 4000
perimeter_acceleration = 3500
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 1000
travel_acceleration = 4000

[print:0.25mm Standard @SWITCHWIRE - HF0.5mm]
inherits = 0.25mm Standard @VORON2 - HF0.5mm; *CORE_XZ_05*; *VSW_HF05*
default_acceleration = 2500
external_perimeter_acceleration = 4000
infill_acceleration = 4000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
travel_acceleration = 4000

[print:0.25mm Strength @SWITCHWIRE - 0.5mm]
inherits = 0.25mm Strength @VORON2 - 0.5mm; *CORE_XZ_05*; *VSW_05*
default_acceleration = 2500
infill_acceleration = 4000
perimeter_acceleration = 2000
solid_infill_acceleration = 2500
top_solid_infill_acceleration = 1000
travel_acceleration = 4000
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45

[print:0.32mm Standard @SWITCHWIRE - HF0.5mm]
inherits = 0.32mm Standard @VORON2 - HF0.5mm; *CORE_XZ_05*; *VSW_HF05*
default_acceleration = 2500
external_perimeter_acceleration = 4000
infill_acceleration = 4000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
travel_acceleration = 4000
support_material_interface_speed = 75%

[print:0.32mm Strength @SWITCHWIRE - HF0.5mm]
inherits = 0.32mm Strength @VORON2 - HF0.5mm; *CORE_XZ_05*; *VSW_HF05*
default_acceleration = 2500
infill_acceleration = 4000
perimeter_acceleration = 2000
solid_infill_acceleration = 2500
top_solid_infill_acceleration = 1000
travel_acceleration = 4000
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45
support_material_interface_speed = 75%
support_material_speed = 80

# VORON Switchwire - 0.6mm nozzle

[print:0.15mm Strength @SWITCHWIRE - 0.6mm]
inherits = 0.15mm Strength @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_06*
overhang_speed_2 = 35
overhang_speed_3 = 80%

[print:0.20mm Standard @SWITCHWIRE - 0.6mm]
inherits = 0.20mm Standard @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_SF06*
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
solid_infill_acceleration = 3000
external_perimeter_speed = 125
perimeter_speed = 125
small_perimeter_speed = 125
overhang_speed_2 = 40
overhang_speed_3 = 70%

[print:0.20mm Standard @SWITCHWIRE - HF0.6mm]
inherits = 0.20mm Standard @VORON2 - HF0.6mm; *CORE_XZ_06*; *VSW_HF06*
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
external_perimeter_speed = 200
small_perimeter_speed = 170
overhang_speed_2 = 40

[print:0.20mm Strength @SWITCHWIRE - 0.6mm]
inherits = 0.20mm Strength @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_06*
perimeter_acceleration = 2000
perimeter_speed = 80
overhang_speed_2 = 35

[print:0.25mm Standard @SWITCHWIRE - 0.6mm]
inherits = 0.25mm Standard @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_SF06*
external_perimeter_acceleration = 2000
perimeter_acceleration = 3000
solid_infill_acceleration = 3000
external_perimeter_speed = 80
gap_fill_speed = 70
perimeter_speed = 90
small_perimeter_speed = 80
overhang_speed_2 = 40
overhang_speed_3 = 70%

[print:0.25mm Standard @SWITCHWIRE - HF0.6mm]
inherits = 0.25mm Standard @VORON2 - HF0.6mm; *CORE_XZ_06*; *VSW_HF06*
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 2000
external_perimeter_speed = 180
gap_fill_speed = 70
small_perimeter_speed = 170
overhang_speed_2 = 40

[print:0.25mm Strength @SWITCHWIRE - 0.6mm]
inherits = 0.25mm Strength @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_06*
gap_fill_speed = 70
perimeter_speed = 80
overhang_speed_2 = 40
solid_infill_acceleration = 3000

[print:0.32mm Standard @SWITCHWIRE - 0.6mm]
inherits = 0.32mm Standard @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_SF06*
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
external_perimeter_speed = 70
gap_fill_speed = 60
small_perimeter_speed = 70
overhang_speed_2 = 40

[print:0.32mm Strength @SWITCHWIRE - 0.6mm]
inherits = 0.32mm Strength @VORON2 - 0.6mm; *CORE_XZ_06*; *VSW_SF06*
gap_fill_speed = 60
overhang_speed_2 = 40
perimeter_acceleration = 2000
solid_infill_acceleration = 3000

[print:0.32mm Standard @SWITCHWIRE - HF0.6mm]
inherits = 0.32mm Standard @VORON2 - HF0.6mm; *CORE_XZ_06*; *VSW_HF06*
external_perimeter_acceleration = 4000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 2000
external_perimeter_speed = 145
gap_fill_speed = 60
small_perimeter_speed = 145
overhang_speed_2 = 40

[print:0.32mm Strength @SWITCHWIRE - HF0.6mm]
inherits = 0.32mm Strength @VORON2 - HF0.6mm; *CORE_XZ_06*; *VSW_HF06*
gap_fill_speed = 60
perimeter_speed = 80
support_material_interface_speed = 75%
support_material_speed = 70
overhang_speed_2 = 40
solid_infill_acceleration = 3000

[print:0.40mm Standard @SWITCHWIRE - HF0.6mm]
inherits = 0.40mm Standard @VORON2 - HF0.6mm; *CORE_XZ_06*; *VSW_HF06*
default_acceleration = 2000
perimeter_acceleration = 4000
solid_infill_acceleration = 3000
top_solid_infill_acceleration = 2000
external_perimeter_speed = 115
gap_fill_speed = 60
small_perimeter_speed = 115
overhang_speed_2 = 40
overhang_speed_3 = 75%

[print:0.40mm Strength @SWITCHWIRE - HF0.6mm]
inherits = 0.40mm Strength @VORON2 - HF0.6mm; *CORE_XZ_06*; *VSW_HF06*
default_acceleration = 2000
infill_acceleration = 3000
perimeter_acceleration = 2000
gap_fill_speed = 60
perimeter_speed = 80
overhang_speed_2 = 40

# VORON Switchwire - 0.8mm nozzle

[print:0.30mm Detail @SWITCHWIRE - 0.8mm]
inherits = 0.30mm Detail @VORON2 - 0.8mm; *CORE_XZ_08*; *VSW_SF08*
gap_fill_speed = 40

[print:0.30mm Standard @SWITCHWIRE - HF0.8mm]
inherits = 0.30mm Standard @VORON2 - HF0.8mm; *CORE_XZ_08*; *VSW_HF08*
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500

[print:0.30mm Strength @SWITCHWIRE - HF0.8mm]
inherits = 0.30mm Strength @VORON2 - HF0.8mm; *CORE_XZ_08*; *VSW_HF08*
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45
support_material_interface_speed = 85%
support_material_speed = 80
top_solid_infill_acceleration = 1200

[print:0.40mm Standard @SWITCHWIRE - 0.8mm]
inherits = 0.40mm Standard @VORON2 - 0.8mm; *CORE_XZ_08*; *VSW_SF08*

[print:0.40mm Standard @SWITCHWIRE - HF0.8mm]
inherits = 0.40mm Standard @VORON2 - HF0.8mm; *CORE_XZ_08*; *VSW_HF08*
external_perimeter_speed = 90
small_perimeter_speed = 90
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500

[print:0.40mm Strength @SWITCHWIRE - HF0.8mm]
inherits = 0.40mm Strength @VORON2 - HF0.8mm; *CORE_XZ_08*; *VSW_HF08*
external_perimeter_speed = 45
perimeter_speed = 80
small_perimeter_speed = 45
top_solid_infill_acceleration = 1200

[print:0.55mm Draft @SWITCHWIRE - 0.8mm]
inherits = 0.55mm Draft @VORON2 - 0.8mm; *CORE_XZ_08*; *VSW_SF08*
perimeter_speed = 40

[print:0.55mm Standard @SWITCHWIRE - HF0.8mm]
inherits = 0.55mm Standard @VORON2 - HF0.8mm; *CORE_XZ_08*; *VSW_HF08*
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500

[print:0.55mm Strength @SWITCHWIRE - HF0.8mm]
inherits = 0.55mm Strength @VORON2 - HF0.8mm; *CORE_XZ_08*; *VSW_HF08*
external_perimeter_speed = 45
perimeter_speed = 75
small_perimeter_speed = 45
top_solid_infill_acceleration = 1200

## VORON - CoreXY

[printer:*VORON_CORE_XY*]
autoemit_temperature_commands = 0
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}
binary_gcode = 0
color_change_gcode = M600
cooling_tube_length = 20
cooling_tube_retraction = 45
deretract_speed = 35
end_gcode = PRINT_END
extra_loading_move = -52
extruder_clearance_height = 33
extruder_clearance_radius = 75
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = klipper
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000,2500
machine_max_acceleration_extruding = 7000,2500
machine_max_acceleration_retracting = 2500,2500
machine_max_acceleration_travel = 7000,2500
machine_max_acceleration_x = 10000,2500
machine_max_acceleration_y = 10000,2500
machine_max_acceleration_z = 400,200
machine_max_feedrate_e = 100,100
machine_max_feedrate_x = 350,175
machine_max_feedrate_y = 350,175
machine_max_feedrate_z = 15,15
machine_max_jerk_e = 10,10
machine_max_jerk_x = 10,8
machine_max_jerk_y = 10,8
machine_max_jerk_z = 2,2
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
multimaterial_purging = 140
parking_pos_retraction = 84
pause_print_gcode = PAUSE
printer_technology = FFF
remaining_times = 1
retract_before_travel = 2.0
retract_before_wipe = 80%
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 0
retract_lift = 0.2
retract_lift_above = 0.25
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = ; @see https://github.com/jontek2/A-better-print_start-macro for the macro\nPRINT_START EXTRUDER=[first_layer_temperature[initial_extruder]] BED=[first_layer_bed_temperature] CHAMBER=[chamber_temperature] CHAMBER_MINIMAL=[chamber_minimal_temperature]
thumbnails = 32x32/PNG, 300x300/PNG, 400x300/PNG
travel_max_lift = 1.5
travel_ramping_lift = 0
travel_slope = 1
use_relative_e_distances = 1
variable_layer_height = 1
wipe = 0

[printer:*VSW_COMMON*]
bed_shape = 0x0,250x0,250x210,0x210
max_print_height = 240

[printer:*VORON_BED_SIZE_120*]
bed_shape = 0x0,120x0,120x120,0x120

[printer:*VORON_BED_SIZE_250*]
bed_shape = 0x0,250x0,250x250,0x250

[printer:*VORON_BED_SIZE_300*]
bed_shape = 0x0,300x0,300x300,0x300

[printer:*VORON_BED_SIZE_350*]
bed_shape = 0x0,350x0,350x350,0x350

[printer:*VORON_HEIGHT_120*]
max_print_height = 120

[printer:*VORON_HEIGHT_250*]
max_print_height = 210

[printer:*VORON_HEIGHT_300*]
max_print_height = 260

[printer:*VORON_HEIGHT_350*]
max_print_height = 310

[printer:VORON V2 250mm - 0.4mm Nozzle (High Flow)]
inherits = *VORON_CORE_XY*; *VORON_BED_SIZE_250*; *VORON_HEIGHT_250*
printer_model = V2_250
printer_variant = HF0.4
nozzle_diameter = 0.4
nozzle_high_flow = 1
default_print_profile = 0.20mm Standard @VORON2 - HF0.4mm
max_layer_height = 0.3
min_layer_height = 0.07
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_VORON2\nPG\nNO_TEMPLATES

[printer:VORON V2 250mm - 0.5mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow)
printer_variant = HF0.5
nozzle_diameter = 0.5
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm Standard @VORON2 - HF0.5mm

[printer:VORON V2 250mm - 0.6mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow)
printer_variant = HF0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.32mm Standard @VORON2 - HF0.6mm

[printer:VORON V2 250mm - 0.8mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow)
printer_variant = HF0.8
nozzle_diameter = 0.8
retract_before_wipe = 50%
retract_lift = 0.25
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm Strength @VORON2 - HF0.8mm

[printer:VORON V2 250mm - 0.25mm Nozzle]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow)
printer_model = V2_250
printer_variant = 0.25
nozzle_diameter = 0.25
nozzle_high_flow = 0
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.12mm Strength @VORON2 - 0.25mm

[printer:VORON V2 250mm - 0.3mm Nozzle]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow)
printer_variant = 0.3
nozzle_diameter = 0.3
nozzle_high_flow = 0
max_layer_height = 0.22
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.16mm Strength @VORON2 - 0.3mm

[printer:VORON V2 250mm - 0.4mm Nozzle]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow)
printer_variant = 0.4
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @VORON2 - 0.4mm

[printer:VORON V2 250mm - 0.5mm Nozzle]
inherits = VORON V2 250mm - 0.5mm Nozzle (High Flow)
printer_variant = 0.5
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @VORON2 - 0.5mm

[printer:VORON V2 250mm - 0.6mm Nozzle]
inherits = VORON V2 250mm - 0.6mm Nozzle (High Flow)
printer_variant = 0.6
nozzle_high_flow = 0
default_print_profile = 0.25mm Standard @VORON2 - 0.6mm

[printer:VORON V2 250mm - 0.8mm Nozzle]
inherits = VORON V2 250mm - 0.8mm Nozzle (High Flow)
printer_variant = 0.8
nozzle_high_flow = 0
default_print_profile = 0.40mm Standard @VORON2 - 0.8mm

[printer:VORON V2 300mm - 0.4mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.5mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.5mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.6mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.6mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.8mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.8mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.25mm Nozzle]
inherits = VORON V2 250mm - 0.25mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.3mm Nozzle]
inherits = VORON V2 250mm - 0.3mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.4mm Nozzle]
inherits = VORON V2 250mm - 0.4mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.5mm Nozzle]
inherits = VORON V2 250mm - 0.5mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.6mm Nozzle]
inherits = VORON V2 250mm - 0.6mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 300mm - 0.8mm Nozzle]
inherits = VORON V2 250mm - 0.8mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_300*
printer_model = V2_300

[printer:VORON V2 350mm - 0.4mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.4mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.5mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.5mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.6mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.6mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.8mm Nozzle (High Flow)]
inherits = VORON V2 250mm - 0.8mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.25mm Nozzle]
inherits = VORON V2 250mm - 0.25mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.3mm Nozzle]
inherits = VORON V2 250mm - 0.3mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.4mm Nozzle]
inherits = VORON V2 250mm - 0.4mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.5mm Nozzle]
inherits = VORON V2 250mm - 0.5mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.6mm Nozzle]
inherits = VORON V2 250mm - 0.6mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON V2 350mm - 0.8mm Nozzle]
inherits = VORON V2 250mm - 0.8mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_350*
printer_model = V2_350

[printer:VORON Trident 250mm - 0.4mm Nozzle (High Flow)]
inherits = *VORON_CORE_XY*; *VORON_BED_SIZE_250*; *VORON_HEIGHT_250*
printer_model = VT_250
printer_variant = HF0.4
nozzle_diameter = 0.4
nozzle_high_flow = 1
default_print_profile = 0.20mm Standard @TRIDENT - HF0.4mm
max_layer_height = 0.3
min_layer_height = 0.07
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_VORON_TRIDENT\nPG\nNO_TEMPLATES

[printer:VORON Trident 250mm - 0.5mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow)
printer_variant = HF0.5
nozzle_diameter = 0.5
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm Standard @TRIDENT - HF0.5mm

[printer:VORON Trident 250mm - 0.6mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow)
printer_variant = HF0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.32mm Standard @TRIDENT - HF0.6mm

[printer:VORON Trident 250mm - 0.8mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow)
printer_variant = HF0.8
nozzle_diameter = 0.8
retract_before_wipe = 50%
retract_lift = 0.25
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm Strength @TRIDENT - HF0.8mm

[printer:VORON Trident 250mm - 0.25mm Nozzle]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow)
printer_model = VT_250
printer_variant = 0.25
nozzle_diameter = 0.25
nozzle_high_flow = 0
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.12mm Strength @TRIDENT - 0.25mm

[printer:VORON Trident 250mm - 0.3mm Nozzle]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow)
printer_variant = 0.3
nozzle_diameter = 0.3
nozzle_high_flow = 0
max_layer_height = 0.22
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.16mm Strength @TRIDENT - 0.3mm

[printer:VORON Trident 250mm - 0.4mm Nozzle]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow)
printer_variant = 0.4
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @TRIDENT - 0.4mm

[printer:VORON Trident 250mm - 0.5mm Nozzle]
inherits = VORON Trident 250mm - 0.5mm Nozzle (High Flow)
printer_variant = 0.5
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @TRIDENT - 0.5mm

[printer:VORON Trident 250mm - 0.6mm Nozzle]
inherits = VORON Trident 250mm - 0.6mm Nozzle (High Flow)
printer_variant = 0.6
nozzle_high_flow = 0
default_print_profile = 0.25mm Standard @TRIDENT - 0.6mm

[printer:VORON Trident 250mm - 0.8mm Nozzle]
inherits = VORON Trident 250mm - 0.8mm Nozzle (High Flow)
printer_variant = 0.8
nozzle_high_flow = 0
default_print_profile = 0.40mm Standard @TRIDENT - 0.8mm

[printer:VORON Trident 300mm - 0.4mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.5mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.5mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.6mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.6mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.8mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.8mm Nozzle (High Flow); *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.25mm Nozzle]
inherits = VORON Trident 250mm - 0.25mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.3mm Nozzle]
inherits = VORON Trident 250mm - 0.3mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.4mm Nozzle]
inherits = VORON Trident 250mm - 0.4mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.5mm Nozzle]
inherits = VORON Trident 250mm - 0.5mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.6mm Nozzle]
inherits = VORON Trident 250mm - 0.6mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 300mm - 0.8mm Nozzle]
inherits = VORON Trident 250mm - 0.8mm Nozzle; *VORON_BED_SIZE_300*; *VORON_HEIGHT_250*
printer_model = VT_300

[printer:VORON Trident 350mm - 0.4mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.4mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.5mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.5mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.6mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.6mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.8mm Nozzle (High Flow)]
inherits = VORON Trident 250mm - 0.8mm Nozzle (High Flow); *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.25mm Nozzle]
inherits = VORON Trident 250mm - 0.25mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.3mm Nozzle]
inherits = VORON Trident 250mm - 0.3mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.4mm Nozzle]
inherits = VORON Trident 250mm - 0.4mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.5mm Nozzle]
inherits = VORON Trident 250mm - 0.5mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.6mm Nozzle]
inherits = VORON Trident 250mm - 0.6mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Trident 350mm - 0.8mm Nozzle]
inherits = VORON Trident 250mm - 0.8mm Nozzle; *VORON_BED_SIZE_350*; *VORON_HEIGHT_250*
printer_model = VT_350

[printer:VORON Zero - 0.4mm Nozzle (High Flow)]
inherits = *VORON_CORE_XY*; *VORON_BED_SIZE_120*; *VORON_HEIGHT_120*
printer_model = V0_120
printer_variant = HF0.4
nozzle_diameter = 0.4
nozzle_high_flow = 1
default_print_profile = 0.20mm Standard @V0 - HF0.4mm
max_layer_height = 0.3
min_layer_height = 0.07
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_VORON_ZERO\nPG\nNO_TEMPLATES

[printer:VORON Zero - 0.5mm Nozzle (High Flow)]
inherits = VORON Zero - 0.4mm Nozzle (High Flow)
printer_variant = HF0.5
nozzle_diameter = 0.5
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm Standard @V0 - HF0.5mm

[printer:VORON Zero - 0.6mm Nozzle (High Flow)]
inherits = VORON Zero - 0.4mm Nozzle (High Flow)
printer_variant = HF0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.32mm Standard @V0 - HF0.6mm

[printer:VORON Zero - 0.8mm Nozzle (High Flow)]
inherits = VORON Zero - 0.4mm Nozzle (High Flow)
printer_variant = HF0.8
nozzle_diameter = 0.8
retract_before_wipe = 50%
retract_lift = 0.25
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm Strength @V0 - HF0.8mm

[printer:VORON Zero - 0.25mm Nozzle]
inherits = VORON Zero - 0.4mm Nozzle (High Flow)
printer_model = V0_120
printer_variant = 0.25
nozzle_diameter = 0.25
nozzle_high_flow = 0
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.12mm Strength @V0 - 0.25mm

[printer:VORON Zero - 0.3mm Nozzle]
inherits = VORON Zero - 0.4mm Nozzle (High Flow)
printer_variant = 0.3
nozzle_diameter = 0.3
nozzle_high_flow = 0
max_layer_height = 0.22
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.16mm Strength @V0 - 0.3mm

[printer:VORON Zero - 0.4mm Nozzle]
inherits = VORON Zero - 0.4mm Nozzle (High Flow)
printer_variant = 0.4
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @V0 - 0.4mm

[printer:VORON Zero - 0.5mm Nozzle]
inherits = VORON Zero - 0.5mm Nozzle (High Flow)
printer_variant = 0.5
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @V0 - 0.5mm

[printer:VORON Zero - 0.6mm Nozzle]
inherits = VORON Zero - 0.6mm Nozzle (High Flow)
printer_variant = 0.6
nozzle_high_flow = 0
default_print_profile = 0.25mm Standard @V0 - 0.6mm

[printer:VORON Zero - 0.8mm Nozzle]
inherits = VORON Zero - 0.8mm Nozzle (High Flow)
printer_variant = 0.8
nozzle_high_flow = 0
default_print_profile = 0.40mm Standard @V0 - 0.8mm

[printer:VORON Switchwire - 0.4mm Nozzle (High Flow)]
inherits = *VORON_CORE_XY*; *VSW_COMMON*
printer_model = VS_MK52
printer_variant = HF0.4
nozzle_diameter = 0.4
nozzle_high_flow = 1
default_print_profile = 0.20mm Standard @SWITCHWIRE - HF0.4mm
max_layer_height = 0.3
min_layer_height = 0.07
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_VORON_SWITCHWIRE\nPG\nNO_TEMPLATES

[printer:VORON Switchwire - 0.5mm Nozzle (High Flow)]
inherits = VORON Switchwire - 0.4mm Nozzle (High Flow)
printer_variant = HF0.5
nozzle_diameter = 0.5
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm Standard @SWITCHWIRE - HF0.5mm

[printer:VORON Switchwire - 0.6mm Nozzle (High Flow)]
inherits = VORON Switchwire - 0.4mm Nozzle (High Flow)
printer_variant = HF0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.32mm Standard @SWITCHWIRE - HF0.6mm

[printer:VORON Switchwire - 0.8mm Nozzle (High Flow)]
inherits = VORON Switchwire - 0.4mm Nozzle (High Flow)
printer_variant = HF0.8
nozzle_diameter = 0.8
retract_before_wipe = 50%
retract_lift = 0.25
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm Strength @SWITCHWIRE - HF0.8mm

[printer:VORON Switchwire - 0.25mm Nozzle]
inherits = VORON Switchwire - 0.4mm Nozzle (High Flow)
printer_model = VS_MK52
printer_variant = 0.25
nozzle_diameter = 0.25
nozzle_high_flow = 0
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.12mm Strength @SWITCHWIRE - 0.25mm

[printer:VORON Switchwire - 0.3mm Nozzle]
inherits = VORON Switchwire - 0.4mm Nozzle (High Flow)
printer_variant = 0.3
nozzle_diameter = 0.3
nozzle_high_flow = 0
max_layer_height = 0.22
min_layer_height = 0.05
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
default_print_profile = 0.16mm Strength @SWITCHWIRE - 0.3mm

[printer:VORON Switchwire - 0.4mm Nozzle]
inherits = VORON Switchwire - 0.4mm Nozzle (High Flow)
printer_variant = 0.4
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @SWITCHWIRE - 0.4mm

[printer:VORON Switchwire - 0.5mm Nozzle]
inherits = VORON Switchwire - 0.5mm Nozzle (High Flow)
printer_variant = 0.5
nozzle_high_flow = 0
default_print_profile = 0.20mm Standard @SWITCHWIRE - 0.5mm

[printer:VORON Switchwire - 0.6mm Nozzle]
inherits = VORON Switchwire - 0.6mm Nozzle (High Flow)
printer_variant = 0.6
nozzle_high_flow = 0
default_print_profile = 0.25mm Standard @SWITCHWIRE - 0.6mm

[printer:VORON Switchwire - 0.8mm Nozzle]
inherits = VORON Switchwire - 0.8mm Nozzle (High Flow)
printer_variant = 0.8
nozzle_high_flow = 0
default_print_profile = 0.40mm Standard @SWITCHWIRE - 0.8mm

[filament:*common*]
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_VORON.*/
cooling = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_settings_id = ""
filament_soluble = 0
filament_toolchange_delay = 0
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament-specific start gcode"
filament_max_volumetric_speed = 0
filament_colour = #FF3232
filament_vendor = Generic

[filament:*ABS*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 65
chamber_minimal_temperature = 40
chamber_temperature = 55
cooling = 1
cooling_perimeter_transition_distance = 10
cooling_slowdown_logic = consistent_surface
disable_fan_first_layers = 1
extrusion_multiplier = 0.93
fan_always_on = 1
fan_below_layer_time = 0
filament_density = 1.04
filament_max_volumetric_speed = 15
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 110
first_layer_temperature = 265
full_fan_speed_layer = 0
max_fan_speed = 65
min_fan_speed = 65
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 265

[filament:*ASA*]
inherits = *ABS*
filament_type = ASA
filament_density = 1.07

[filament:*PETG*]
inherits = *common*
bed_temperature = 70
bridge_fan_speed = 100
chamber_minimal_temperature = 0
chamber_temperature = 35
cooling_perimeter_transition_distance = 10
cooling_slowdown_logic = consistent_surface
disable_fan_first_layers = 2
fan_always_on = 1
fan_below_layer_time = 20
filament_density = 1.27
filament_max_volumetric_speed = 17
filament_type = PETG
first_layer_bed_temperature = 70
first_layer_temperature = 240
full_fan_speed_layer = 5
max_fan_speed = 30
min_fan_speed = 20
temperature = 245

[filament:*PLA*]
inherits = *common*
bed_temperature = 55
bridge_fan_speed = 100
chamber_minimal_temperature = 0
chamber_temperature = 20
cooling_perimeter_transition_distance = 10
cooling_slowdown_logic = consistent_surface
disable_fan_first_layers = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_density = 1.24
filament_max_volumetric_speed = 13
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 215
full_fan_speed_layer = 4
max_fan_speed = 100
min_fan_speed = 100
slowdown_below_layer_time = 12
temperature = 210

[filament:*ABSHF*]
inherits = *ABS*
filament_max_volumetric_speed = 25

[filament:*ASAHF*]
inherits = *ASA*
filament_max_volumetric_speed = 25

[filament:*PETGHF*]
inherits = *PETG*
filament_max_volumetric_speed = 22

[filament:*PLAHF*]
inherits = *PLA*
filament_max_volumetric_speed = 21

[filament:Generic ABS @Voron 0.25]
inherits = *ABS*
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.25 and !nozzle_high_flow[0]

[filament:Generic ABS @Voron 0.3]
inherits = *ABS*
filament_max_volumetric_speed = 10
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.3 and !nozzle_high_flow[0]

[filament:Generic ABS @Voron 0.4]
inherits = *ABS*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[filament:Generic ABS @Voron 0.5]
inherits = *ABS*
filament_max_volumetric_speed = 16
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[filament:Generic ABS @Voron 0.6]
inherits = *ABS*
filament_max_volumetric_speed = 17
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[filament:Generic ABS @Voron 0.8]
inherits = *ABS*
filament_max_volumetric_speed = 18
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[filament:Generic ASA @Voron 0.25]
inherits = Generic ABS @Voron 0.25
filament_type = ASA

[filament:Generic ASA @Voron 0.3]
inherits = Generic ABS @Voron 0.3
filament_type = ASA

[filament:Generic ASA @Voron 0.4]
inherits = Generic ABS @Voron 0.4
filament_type = ASA

[filament:Generic ASA @Voron 0.5]
inherits = Generic ABS @Voron 0.5
filament_type = ASA

[filament:Generic ASA @Voron 0.6]
inherits = Generic ABS @Voron 0.6
filament_type = ASA

[filament:Generic ASA @Voron 0.8]
inherits = Generic ABS @Voron 0.8
filament_type = ASA

[filament:Generic PLA @Voron 0.25]
inherits = *PLA*
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.25 and !nozzle_high_flow[0]

[filament:Generic PLA @Voron 0.3]
inherits = *PLA*
filament_max_volumetric_speed = 10
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.3 and !nozzle_high_flow[0]

[filament:Generic PLA @Voron 0.4]
inherits = *PLA*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[filament:Generic PLA @Voron 0.5]
inherits = *PLA*
filament_max_volumetric_speed = 14
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[filament:Generic PLA @Voron 0.6]
inherits = *PLA*
filament_max_volumetric_speed = 15
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[filament:Generic PLA @Voron 0.8]
inherits = *PLA*
filament_max_volumetric_speed = 16
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[filament:Generic PETG @Voron 0.25]
inherits = *PETG*
filament_max_volumetric_speed = 8
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.25 and !nozzle_high_flow[0]

[filament:Generic PETG @Voron 0.3]
inherits = *PETG*
filament_max_volumetric_speed = 11
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.3 and !nozzle_high_flow[0]

[filament:Generic PETG @Voron 0.4]
inherits = *PETG*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.4 and !nozzle_high_flow[0]

[filament:Generic PETG @Voron 0.5]
inherits = *PETG*
filament_max_volumetric_speed = 18
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.5 and !nozzle_high_flow[0]

[filament:Generic PETG @Voron 0.6]
inherits = *PETG*
filament_max_volumetric_speed = 19
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.6 and !nozzle_high_flow[0]

[filament:Generic PETG @Voron 0.8]
inherits = *PETG*
filament_max_volumetric_speed = 20
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_diameter[0]==0.8 and !nozzle_high_flow[0]

[filament:Generic ABS @Voron HF0.4]
inherits = *ABSHF*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.4

[filament:Generic ABS @Voron HF0.5]
inherits = Generic ABS @Voron HF0.4
filament_max_volumetric_speed = 27
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.5

[filament:Generic ABS @Voron HF0.6]
inherits = Generic ABS @Voron HF0.4
filament_max_volumetric_speed = 29
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.6

[filament:Generic ABS @Voron HF0.8]
inherits = Generic ABS @Voron HF0.4
filament_max_volumetric_speed = 31
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.8

[filament:Generic ASA @Voron HF0.4]
inherits = *ASAHF*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.4

[filament:Generic ASA @Voron HF0.5]
inherits = Generic ASA @Voron HF0.4
filament_max_volumetric_speed = 27
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.5

[filament:Generic ASA @Voron HF0.6]
inherits = Generic ASA @Voron HF0.4
filament_max_volumetric_speed = 29
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.6

[filament:Generic ASA @Voron HF0.8]
inherits = Generic ASA @Voron HF0.4
filament_max_volumetric_speed = 31
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.8

[filament:Generic PETG @Voron HF0.4]
inherits = *PETGHF*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.4

[filament:Generic PETG @Voron HF0.5]
inherits = Generic PETG @Voron HF0.4
filament_max_volumetric_speed = 25
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.5

[filament:Generic PETG @Voron HF0.6]
inherits = Generic PETG @Voron HF0.4
filament_max_volumetric_speed = 27
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.6

[filament:Generic PETG @Voron HF0.8]
inherits = Generic PETG @Voron HF0.4
filament_max_volumetric_speed = 29
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.8

[filament:Generic PLA @Voron HF0.4]
inherits = *PLAHF*
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.4

[filament:Generic PLA @Voron HF0.5]
inherits = Generic PLA @Voron HF0.4
filament_max_volumetric_speed = 24
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.5

[filament:Generic PLA @Voron HF0.6]
inherits = Generic PLA @Voron HF0.4
filament_max_volumetric_speed = 26
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.6

[filament:Generic PLA @Voron HF0.8]
inherits = Generic PLA @Voron HF0.4
filament_max_volumetric_speed = 28
compatible_printers_condition = printer_model=~/(V2_250|V2_300|V2_350|VT_250|VT_300|VT_350|V0_120|VS_MK52)/ and nozzle_high_flow[0] and nozzle_diameter[0]==0.8

#     __  ___      __             _            __     ____             _____ __         
#    / / / (_)____/ /_____  _____(_)________ _/ /    / __ \_________  / __(_) /__  _____
#   / /_/ / / ___/ __/ __ \/ ___/ / ___/ __ `/ /    / /_/ / ___/ __ \/ /_/ / / _ \/ ___/
#  / __  / (__  ) /_/ /_/ / /  / / /__/ /_/ / /    / ____/ /  / /_/ / __/ / /  __(__  ) 
# /_/ /_/_/____/\__/\____/_/  /_/\___/\__,_/_/    /_/   /_/   \____/_/ /_/_/\___/____/  
#                                                                                                                               
#
# Here be dragons - unmaintained and outdated profiles that are kept for backwards compatibility

[printer_model:Voron_v2_250_afterburner]
name = VORON2 250mm (Afterburner)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_250x250.stl
bed_texture = bedtexture_250x250-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v2_afterburner.png

[printer_model:Voron_v2_300_afterburner]
name = VORON2 300mm (Afterburner)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_300x300.stl
bed_texture = bedtexture_300x300-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v2_afterburner.png

[printer_model:Voron_v2_350_afterburner]
name = VORON2 350mm (Afterburner)
variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_350x350.stl
bed_texture = bedtexture_350x350-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v2_afterburner.png

[printer_model:Voron_v2_250]
name = VORON2 250mm (Mobius)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_250x250.stl
bed_texture = bedtexture_250x250-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v2_afterburner.png

[printer_model:Voron_v2_300]
name = VORON2 300mm (Mobius)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_300x300.stl
bed_texture = bedtexture_250x250-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v2_afterburner.png

[printer_model:Voron_v2_350]
name = VORON2 350mm (Mobius)
variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_350x350.stl
bed_texture = bedtexture_350x350-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v2_afterburner.png

[printer_model:Voron_v1_250_afterburner]
name = VORON1 250mm (Afterburner)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
technology = FFF
family = Historical Profiles
bed_model = bedmodel_250x250.stl
bed_texture = bedtexture_250x250-dark.png
default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
thumbnail = thumbnail_vt_afterburner.png

[printer_model:Voron_v1_300_afterburner]
name = VORON1 300mm (Afterburner)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
technology = FFF
family = Historical Profiles
bed_model = bedmodel_300x300.stl
bed_texture = bedtexture_250x250-dark.png
default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
thumbnail = thumbnail_vt_afterburner.png

[printer_model:Voron_v1_350_afterburner]
name = VORON1 350mm (Afterburner)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
technology = FFF
family = Historical Profiles
bed_model = bedmodel_350x350.stl
bed_texture = bedtexture_350x350-dark.png
default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
thumbnail = thumbnail_vt_afterburner.png

[printer_model:Voron_v0_120]
name = VORON Zero (MiniAB)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_120x120.stl
bed_texture = bedtexture_120x120-dark.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_v0_miniab.png

[printer_model:Voron_SW_afterburner]
name = VORON Switchwire (Afterburner)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_252x241.stl
bed_texture = bedtexture_252x241-dark.png
bed_with_grid = 1
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_vs_afterburner.png

[printer_model:Voron_SW]
name = VORON Switchwire (Mobius)
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
technology = FFF
family = Historical Profiles
bed_model = bedmodel_252x241.stl
bed_texture = bedtexture_252x241-dark.png
bed_with_grid = 1
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
thumbnail = thumbnail_vs_afterburner.png

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface

[printer:*0.25nozzle*]
nozzle_diameter = 0.25
max_layer_height = 0.175
min_layer_height = 0.025
retract_lift_above = 0.15
printer_variant = 0.25
default_print_profile = 0.10mm 0.25nozzle

[printer:*0.3nozzle*]
nozzle_diameter = 0.3
max_layer_height = 0.225
min_layer_height = 0.025
retract_lift_above = 0.2
printer_variant = 0.3
default_print_profile = 0.10mm 0.3nozzle

[printer:*0.4nozzle*]
nozzle_diameter = 0.4
max_layer_height = 0.3
min_layer_height = 0.0375
retract_lift_above = 0.2
printer_variant = 0.4
default_print_profile = 0.15mm 0.4nozzle

[printer:*0.5nozzle*]
nozzle_diameter = 0.5
max_layer_height = 0.375
min_layer_height = 0.05
retract_lift_above = 0.2
printer_variant = 0.5
default_print_profile = 0.2mm 0.5nozzle

[printer:*0.6nozzle*]
nozzle_diameter = 0.6
max_layer_height = 0.45
min_layer_height = 0.075
retract_lift_above = 0.3
printer_variant = 0.6
default_print_profile = 0.2mm 0.6nozzle

[printer:*0.8nozzle*]
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.0875
retract_lift_above = 0.4
printer_variant = 0.8
default_print_profile = 0.3mm 0.8nozzle

[printer:*1.0nozzle*]
nozzle_diameter = 1.0
max_layer_height = 0.75
min_layer_height = 0.1
retract_lift_above = 0.4
printer_variant = 1.0
default_print_profile = 0.4mm 1.0nozzle

[printer:*1.2nozzle*]
nozzle_diameter = 1.2
max_layer_height = 0.9
min_layer_height = 0.125
retract_lift_above = 0.4
printer_variant = 1.2
default_print_profile = 0.4mm 1.2nozzle


# Common printer preset

[printer:*legacy_common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
between_objects_gcode = 
deretract_speed = 25
end_gcode = print_end    ;end script from macro
extruder_colour = #FFE3CA
extruder_offset = 0x0
gcode_flavor = klipper
autoemit_temperature_commands = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 1500
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
machine_limits_usage = time_estimate_only
remaining_times = 0
silent_mode = 0
printer_notes = voron
printer_settings_id = 
retract_before_travel = 3
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 5.8
retract_length_toolchange = 10
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 500
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
single_extruder_multi_material = 0
start_gcode = print_start EXTRUDER=[first_layer_temperature[initial_tool]] BED=[first_layer_bed_temperature]
thumbnails = 64x64,400x300
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
default_filament_profile = Basic PLA @VORON
extruder_clearance_height = 20
extruder_clearance_radius = 70

[printer:*volcano*]
retract_length = 6.8

[printer:*volcano_afterburner*]
retract_length = 5.5

[printer:*afterburner*]
retract_length = 0.75
deretract_speed = 30
retract_speed = 50

[printer:*zero*]
retract_length = 2.0
deretract_speed = 30
retract_speed = 50
extruder_clearance_height = 38
extruder_clearance_radius = 34

[printer:*Voron_v2_250*]
inherits = *legacy_common*
bed_shape = 0x0,250x0,250x250,0x250
max_print_height = 230
printer_model = Voron_v2_250
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6

[printer:*Voron_v2_300*]
inherits = *legacy_common*
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 280
printer_model = Voron_v2_300
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6

[printer:*Voron_v2_350*]
inherits = *legacy_common*
bed_shape = 0x0,350x0,350x350,0x350
max_print_height = 330
printer_model = Voron_v2_350
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6

[printer:*Voron_v2_250_afterburner*]
inherits = *Voron_v2_250*; *afterburner*
printer_model = Voron_v2_250_afterburner
printer_notes = Unoffical profile.\nE3DV6

[printer:*Voron_v2_300_afterburner*]
inherits = *Voron_v2_300*; *afterburner*
printer_model = Voron_v2_300_afterburner
printer_notes = Unoffical profile.\nE3DV6

[printer:*Voron_v2_350_afterburner*]
inherits = *Voron_v2_350*; *afterburner*
printer_model = Voron_v2_350_afterburner
printer_notes = Unoffical profile.\nE3DV6

[printer:*Voron_v1_250_afterburner*]
inherits = *legacy_common*; *afterburner*
bed_shape = 0x0,250x0,250x250,0x250
max_print_height = 230
printer_model = Voron_v1_250_afterburner
printer_notes = Unoffical profile.\nE3DV6

[printer:*Voron_v1_300_afterburner*]
inherits = *legacy_common*; *afterburner*
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 280
printer_model = Voron_v1_300_afterburner
printer_notes = Unoffical profile.\nE3DV6

[printer:*Voron_v1_350_afterburner*]
inherits = *legacy_common*; *afterburner*
bed_shape = 0x0,350x0,350x350,0x350
max_print_height = 330
printer_model = Voron_v1_350_afterburner
printer_notes = Unoffical profile.\nE3DV6

[printer:*Voron_v0_120*]
inherits = *legacy_common*
bed_shape = 0x0,120x0,120x120,0x120
max_print_height = 120
printer_model = Voron_v0_120
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6

[printer:*Voron_Switchwire*]
inherits = *legacy_common*
bed_shape = 0x0,250x0,250x210,0x210
max_print_height = 240
printer_model = Voron_SW
printer_notes = PRINTER_HAS_BOWDEN\nSTU\nE3DV6

[printer:*Voron_Switchwire_afterburner*]
inherits = *Voron_Switchwire*; *afterburner*
printer_model = Voron_SW_afterburner
printer_notes = STU\nE3DV6

[printer:Voron_v2_250 0.25 nozzle]
inherits = *Voron_v2_250*; *0.25nozzle*

[printer:Voron_v2_250 0.3 nozzle]
inherits = *Voron_v2_250*; *0.3nozzle*

[printer:Voron_v2_250 0.4 nozzle]
inherits = *Voron_v2_250*; *0.4nozzle*

[printer:Voron_v2_250 0.5 nozzle]
inherits = *Voron_v2_250*; *0.5nozzle*

[printer:Voron_v2_250 0.6 nozzle]
inherits = *Voron_v2_250*; *0.6nozzle*

[printer:Voron_v2_250 0.8 nozzle]
inherits = *Voron_v2_250*; *0.8nozzle*

[printer:Voron_v2_250 0.6 volcano]
inherits = *Voron_v2_250*; *0.6nozzle*; *volcano*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_250 0.8 volcano]
inherits = *Voron_v2_250*; *0.8nozzle*; *volcano*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_250 1.0 volcano]
inherits = *Voron_v2_250*; *1.0nozzle*; *volcano*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_250 1.2 volcano]
inherits = *Voron_v2_250*; *1.2nozzle*; *volcano*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300 0.25 nozzle]
inherits = *Voron_v2_300*; *0.25nozzle*

[printer:Voron_v2_300 0.3 nozzle]
inherits = *Voron_v2_300*; *0.3nozzle*

[printer:Voron_v2_300 0.4 nozzle]
inherits = *Voron_v2_300*; *0.4nozzle*

[printer:Voron_v2_300 0.5 nozzle]
inherits = *Voron_v2_300*; *0.5nozzle*

[printer:Voron_v2_300 0.6 nozzle]
inherits = *Voron_v2_300*; *0.6nozzle*

[printer:Voron_v2_300 0.8 nozzle]
inherits = *Voron_v2_300*; *0.8nozzle*

[printer:Voron_v2_300 0.6 volcano]
inherits = *Voron_v2_300*; *0.6nozzle*; *volcano*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300 0.8 volcano]
inherits = *Voron_v2_300*; *0.8nozzle*; *volcano*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300 1.0 volcano]
inherits = *Voron_v2_300*; *1.0nozzle*; *volcano*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300 1.2 volcano]
inherits = *Voron_v2_300*; *1.2nozzle*; *volcano*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350 0.25 nozzle]
inherits = *Voron_v2_350*; *0.25nozzle*

[printer:Voron_v2_350 0.3 nozzle]
inherits = *Voron_v2_350*; *0.3nozzle*

[printer:Voron_v2_350 0.4 nozzle]
inherits = *Voron_v2_350*; *0.4nozzle*

[printer:Voron_v2_350 0.5 nozzle]
inherits = *Voron_v2_350*; *0.5nozzle*

[printer:Voron_v2_350 0.6 nozzle]
inherits = *Voron_v2_350*; *0.6nozzle*

[printer:Voron_v2_350 0.8 nozzle]
inherits = *Voron_v2_350*; *0.8nozzle*

[printer:Voron_v2_350 volcano 0.6 nozzle]
inherits = *Voron_v2_350*; *0.6nozzle*; *volcano*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350 volcano 0.8 nozzle]
inherits = *Voron_v2_350*; *0.8nozzle*; *volcano*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350 volcano 1.0 nozzle]
inherits = *Voron_v2_350*; *1.0nozzle*; *volcano*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350 volcano 1.2 nozzle]
inherits = *Voron_v2_350*; *1.2nozzle*; *volcano*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v1_250_afterburner 0.25 nozzle]
inherits = *Voron_v1_250_afterburner*; *0.25nozzle*

[printer:Voron_v1_250_afterburner 0.3 nozzle]
inherits = *Voron_v1_250_afterburner*; *0.3nozzle*

[printer:Voron_v1_250_afterburner 0.4 nozzle]
inherits = *Voron_v1_250_afterburner*; *0.4nozzle*

[printer:Voron_v1_250_afterburner 0.5 nozzle]
inherits = *Voron_v1_250_afterburner*; *0.5nozzle*

[printer:Voron_v1_250_afterburner 0.6 nozzle]
inherits = *Voron_v1_250_afterburner*; *0.6nozzle*

[printer:Voron_v1_250_afterburner 0.8 nozzle]
inherits = *Voron_v1_250_afterburner*; *0.8nozzle*

[printer:Voron_v1_300_afterburner 0.25 nozzle]
inherits = *Voron_v1_300_afterburner*; *0.25nozzle*

[printer:Voron_v1_300_afterburner 0.3 nozzle]
inherits = *Voron_v1_300_afterburner*; *0.3nozzle*

[printer:Voron_v1_300_afterburner 0.4 nozzle]
inherits = *Voron_v1_300_afterburner*; *0.4nozzle*

[printer:Voron_v1_300_afterburner 0.5 nozzle]
inherits = *Voron_v1_300_afterburner*; *0.5nozzle*

[printer:Voron_v1_300_afterburner 0.6 nozzle]
inherits = *Voron_v1_300_afterburner*; *0.6nozzle*

[printer:Voron_v1_300_afterburner 0.8 nozzle]
inherits = *Voron_v1_300_afterburner*; *0.8nozzle*

[printer:Voron_v1_350_afterburner 0.25 nozzle]
inherits = *Voron_v1_350_afterburner*; *0.25nozzle*

[printer:Voron_v1_350_afterburner 0.3 nozzle]
inherits = *Voron_v1_350_afterburner*; *0.3nozzle*

[printer:Voron_v1_350_afterburner 0.4 nozzle]
inherits = *Voron_v1_350_afterburner*; *0.4nozzle*

[printer:Voron_v1_350_afterburner 0.5 nozzle]
inherits = *Voron_v1_350_afterburner*; *0.5nozzle*

[printer:Voron_v1_350_afterburner 0.6 nozzle]
inherits = *Voron_v1_350_afterburner*; *0.6nozzle*

[printer:Voron_v1_350_afterburner 0.8 nozzle]
inherits = *Voron_v1_350_afterburner*; *0.8nozzle*

[printer:Voron_v2_250_afterburner 0.25 nozzle]
inherits = *Voron_v2_250_afterburner*; *0.25nozzle*

[printer:Voron_v2_250_afterburner 0.3 nozzle]
inherits = *Voron_v2_250_afterburner*; *0.3nozzle*

[printer:Voron_v2_250_afterburner 0.4 nozzle]
inherits = *Voron_v2_250_afterburner*; *0.4nozzle*

[printer:Voron_v2_250_afterburner 0.5 nozzle]
inherits = *Voron_v2_250_afterburner*; *0.5nozzle*

[printer:Voron_v2_250_afterburner 0.6 nozzle]
inherits = *Voron_v2_250_afterburner*; *0.6nozzle*

[printer:Voron_v2_250_afterburner 0.8 nozzle]
inherits = *Voron_v2_250_afterburner*; *0.8nozzle*

[printer:Voron_v2_250_afterburner 0.6 volcano]
inherits = *Voron_v2_250_afterburner*; *0.6nozzle*; *volcano_afterburner*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_250_afterburner 0.8 volcano]
inherits = *Voron_v2_250_afterburner*; *0.8nozzle*; *volcano_afterburner*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_250_afterburner 1.0 volcano]
inherits = *Voron_v2_250_afterburner*; *1.0nozzle*; *volcano_afterburner*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_250_afterburner 1.2 volcano]
inherits = *Voron_v2_250_afterburner*; *1.2nozzle*; *volcano_afterburner*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300_afterburner 0.25 nozzle]
inherits = *Voron_v2_300_afterburner*; *0.25nozzle*

[printer:Voron_v2_300_afterburner 0.3 nozzle]
inherits = *Voron_v2_300_afterburner*; *0.3nozzle*

[printer:Voron_v2_300_afterburner 0.4 nozzle]
inherits = *Voron_v2_300_afterburner*; *0.4nozzle*

[printer:Voron_v2_300_afterburner 0.5 nozzle]
inherits = *Voron_v2_300_afterburner*; *0.5nozzle*

[printer:Voron_v2_300_afterburner 0.6 nozzle]
inherits = *Voron_v2_300_afterburner*; *0.6nozzle*

[printer:Voron_v2_300_afterburner 0.8 nozzle]
inherits = *Voron_v2_300_afterburner*; *0.8nozzle*

[printer:Voron_v2_300_afterburner 0.6 volcano]
inherits = *Voron_v2_300_afterburner*; *0.6nozzle*; *volcano_afterburner*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300_afterburner 0.8 volcano]
inherits = *Voron_v2_300_afterburner*; *0.8nozzle*; *volcano_afterburner*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300_afterburner 1.0 volcano]
inherits = *Voron_v2_300_afterburner*; *1.0nozzle*; *volcano_afterburner*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_300_afterburner 1.2 volcano]
inherits = *Voron_v2_300_afterburner*; *1.2nozzle*; *volcano_afterburner*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350_afterburner 0.25 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.25nozzle*

[printer:Voron_v2_350_afterburner 0.3 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.3nozzle*

[printer:Voron_v2_350_afterburner 0.4 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.4nozzle*

[printer:Voron_v2_350_afterburner 0.5 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.5nozzle*

[printer:Voron_v2_350_afterburner 0.6 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.6nozzle*

[printer:Voron_v2_350_afterburner 0.8 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.8nozzle*

[printer:Voron_v2_350_afterburner volcano 0.6 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.6nozzle*; *volcano_afterburner*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350_afterburner volcano 0.8 nozzle]
inherits = *Voron_v2_350_afterburner*; *0.8nozzle*; *volcano_afterburner*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350_afterburner volcano 1.0 nozzle]
inherits = *Voron_v2_350_afterburner*; *1.0nozzle*; *volcano_afterburner*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v2_350_afterburner volcano 1.2 nozzle]
inherits = *Voron_v2_350_afterburner*; *1.2nozzle*; *volcano_afterburner*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v0 0.25 nozzle]
inherits = *Voron_v0_120*; *0.25nozzle*; *zero*

[printer:Voron_v0 0.3 nozzle]
inherits = *Voron_v0_120*; *0.3nozzle*; *zero*

[printer:Voron_v0 0.4 nozzle]
inherits = *Voron_v0_120*; *0.4nozzle*; *zero*

[printer:Voron_v0 0.5 nozzle]
inherits = *Voron_v0_120*; *0.5nozzle*; *zero*

[printer:Voron_v0 0.6 nozzle]
inherits = *Voron_v0_120*; *0.6nozzle*; *zero*

[printer:Voron_v0 0.8 nozzle]
inherits = *Voron_v0_120*; *0.8nozzle*; *zero*

[printer:Voron_v0 volcano 0.6 nozzle]
inherits = *Voron_v0_120*; *0.6nozzle*; *volcano*; *zero*
printer_variant = volcano 0.6
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v0 volcano 0.8 nozzle]
inherits = *Voron_v0_120*; *0.8nozzle*; *volcano*; *zero*
printer_variant = volcano 0.8
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v0 volcano 1.0 nozzle]
inherits = *Voron_v0_120*; *1.0nozzle*; *volcano*; *zero*
printer_variant = volcano 1.0
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_v0 volcano 1.2 nozzle]
inherits = *Voron_v0_120*; *1.2nozzle*; *volcano*; *zero*
printer_variant = volcano 1.2
printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire 0.25 nozzle]
inherits = *Voron_Switchwire*; *0.25nozzle*

[printer:Voron_Switchwire 0.3 nozzle]
inherits = *Voron_Switchwire*; *0.3nozzle*

[printer:Voron_Switchwire 0.4 nozzle]
inherits = *Voron_Switchwire*; *0.4nozzle*

[printer:Voron_Switchwire 0.5 nozzle]
inherits = *Voron_Switchwire*; *0.5nozzle*

[printer:Voron_Switchwire 0.6 nozzle]
inherits = *Voron_Switchwire*; *0.6nozzle*

[printer:Voron_Switchwire 0.8 nozzle]
inherits = *Voron_Switchwire*; *0.8nozzle*

[printer:Voron_Switchwire 0.6 volcano]
inherits = *Voron_Switchwire*; *0.6nozzle*; *volcano*
printer_variant = volcano 0.6
printer_notes = PRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire 0.8 volcano]
inherits = *Voron_Switchwire*; *0.8nozzle*; *volcano*
printer_variant = volcano 0.8
printer_notes = PRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire 1.0 volcano]
inherits = *Voron_Switchwire*; *1.0nozzle*; *volcano*
printer_variant = volcano 1.0
printer_notes = PRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire 1.2 volcano]
inherits = *Voron_Switchwire*; *1.2nozzle*; *volcano*
printer_variant = volcano 1.2
printer_notes = PRINTER_HAS_BOWDEN\nVOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire_afterburner 0.25 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.25nozzle*

[printer:Voron_Switchwire_afterburner 0.3 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.3nozzle*

[printer:Voron_Switchwire_afterburner 0.4 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.4nozzle*

[printer:Voron_Switchwire_afterburner 0.5 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.5nozzle*

[printer:Voron_Switchwire_afterburner 0.6 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.6nozzle*

[printer:Voron_Switchwire_afterburner 0.8 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.8nozzle*

[printer:Voron_Switchwire_afterburner volcano 0.6 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.6nozzle*; *volcano_afterburner*
printer_variant = volcano 0.6
printer_notes = VOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire_afterburner volcano 0.8 nozzle]
inherits = *Voron_Switchwire_afterburner*; *0.8nozzle*; *volcano_afterburner*
printer_variant = volcano 0.8
printer_notes = VOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire_afterburner volcano 1.0 nozzle]
inherits = *Voron_Switchwire_afterburner*; *1.0nozzle*; *volcano_afterburner*
printer_variant = volcano 1.0
printer_notes = VOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

[printer:Voron_Switchwire_afterburner volcano 1.2 nozzle]
inherits = *Voron_Switchwire_afterburner*; *1.2nozzle*; *volcano_afterburner*
printer_variant = volcano 1.2
printer_notes = VOLCANO
default_filament_profile = Basic PLA VOLCANO @VORON

# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
# All other print presets will derive from the *common* print preset.

[print:*legacy_common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 0.9
bottom_fill_pattern = monotonic
bridge_speed = 60
brim_inside_holes = 0
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 2000
travel_acceleration = 3000
dont_support_bridges = 1
ensure_vertical_shell_thickness = 1
external_perimeters_first = 0
external_perimeter_speed = 40
extra_perimeters = 0
extra_perimeters_overhangs = 0
elefant_foot_compensation = 0.1
fill_angle = 45
fill_density = 15%
fill_pattern = gyroid
first_layer_acceleration = 1000
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 4000
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 20%
infill_speed = 125
interface_shells = 0
label_printed_objects = 1
max_print_speed = 300
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 20
notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
only_one_perimeter_top = 1
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
perimeters = 3
perimeter_acceleration = 2000
perimeter_extruder = 1
perimeter_speed = 100
post_process = 
print_settings_id = 
raft_layers = 0
seam_position = nearest
single_extruder_multi_material_priming = 1
skirts = 3
skirt_distance = 3
skirt_height = 1
small_perimeter_speed = 40
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_speed = 120
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 1
support_material_interface_spacing = 0
support_material_interface_speed = 70
support_material_pattern = rectilinear
support_material_interface_extruder = 0
support_material_solid_first_layer = 1
support_material_spacing = 1.5
support_material_speed = 90
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 0.6
thin_perimeters = 1
thin_walls = 0
top_fill_pattern = monotonic
top_solid_infill_speed = 50
travel_speed = 300
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
extrusion_width = 0
external_perimeter_extrusion_width = 0
first_layer_extrusion_width = 0
infill_extrusion_width = 0
perimeter_extrusion_width = 0
solid_infill_extrusion_width = 0
top_infill_extrusion_width = 0
support_material_extrusion_width = 0
infill_anchor = 0

# Print parameters common to a 0.25mm diameter nozzle.

[print:*0.25nozzle*]
perimeters = 5
support_material_interface_spacing = 0.1
support_material_spacing = 1
first_layer_height = 0.15
extrusion_width = 0.27
external_perimeter_extrusion_width = 0.26
first_layer_extrusion_width = 0.35
infill_extrusion_width = 0.27
perimeter_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.27
support_material_extrusion_width = 0.27
elefant_foot_compensation = 0

# Print parameters common to a 0.3mm diameter nozzle.

[print:*0.3nozzle*]
perimeters = 4
support_material_interface_spacing = 0.15
support_material_spacing = 1
first_layer_height = 0.2
extrusion_width = 0.33
external_perimeter_extrusion_width = 0.31
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.33
perimeter_extrusion_width = 0.33
solid_infill_extrusion_width = 0.33
top_infill_extrusion_width = 0.33
support_material_extrusion_width = 0.33

# Print parameters common to a 0.2mm diameter nozzle.

[print:*0.4nozzle*]
perimeters = 3
support_material_interface_spacing = 0.2
support_material_spacing = 1
first_layer_height = 0.2
extrusion_width = 0.44
external_perimeter_extrusion_width = 0.42
first_layer_extrusion_width = 0.56
infill_extrusion_width = 0.44
perimeter_extrusion_width = 0.44
solid_infill_extrusion_width = 0.44
top_infill_extrusion_width = 0.44
support_material_extrusion_width = 0.44

# Print parameters common to a 0.2mm diameter nozzle.

[print:*0.5nozzle*]
perimeters = 2
support_material_interface_spacing = 0.2
support_material_spacing = 1.1
first_layer_height = 0.2
extrusion_width = 0.55
external_perimeter_extrusion_width = 0.52
first_layer_extrusion_width = 0.7
infill_extrusion_width = 0.55
perimeter_extrusion_width = 0.55
solid_infill_extrusion_width = 0.55
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.55

# Print parameters common to a 0.2mm diameter nozzle.

[print:*0.6nozzle*]
perimeters = 2
support_material_interface_spacing = 0.3
support_material_spacing = 1.2
first_layer_height = 0.3
extrusion_width = 0.66
external_perimeter_extrusion_width = 0.63
first_layer_extrusion_width = 0.84
infill_extrusion_width = 0.66
perimeter_extrusion_width = 0.66
solid_infill_extrusion_width = 0.66
top_infill_extrusion_width = 0.66
support_material_extrusion_width = 0.66

# Print parameters common to a 0.8mm diameter nozzle.

[print:*0.8nozzle*]
perimeters = 2
support_material_interface_spacing = 0.3
support_material_spacing = 1.2
first_layer_height = 0.4
extrusion_width = 0.88
external_perimeter_extrusion_width = 0.84
first_layer_extrusion_width = 1.12
infill_extrusion_width = 0.88
perimeter_extrusion_width = 0.88
solid_infill_extrusion_width = 0.88
top_infill_extrusion_width = 0.88
support_material_extrusion_width = 0.88

[print:*1.0nozzle*]
perimeters = 2
support_material_interface_spacing = 0.4
support_material_spacing = 1.4
first_layer_height = 0.4
extrusion_width = 1.1
external_perimeter_extrusion_width = 1.05
first_layer_extrusion_width = 1.4
infill_extrusion_width = 1.1
perimeter_extrusion_width = 1.1
solid_infill_extrusion_width = 1.1
top_infill_extrusion_width = 1.1
support_material_extrusion_width = 1.1

[print:*1.2nozzle*]
perimeters = 2
support_material_interface_spacing = 0.5
support_material_spacing = 1.6
first_layer_height = 0.4
extrusion_width = 1.32
external_perimeter_extrusion_width = 1.26
first_layer_extrusion_width = 1.68
infill_extrusion_width = 1.32
perimeter_extrusion_width = 1.32
solid_infill_extrusion_width = 1.32
top_infill_extrusion_width = 1.32
support_material_extrusion_width = 1.32

[print:*0.05mm*]
inherits = *legacy_common*
bottom_solid_layers = 11
top_solid_layers = 12
layer_height = 0.05
bridge_flow_ratio = 0.5
infill_acceleration = 1500
infill_speed = 100
max_print_speed = 100
perimeter_speed = 70
external_perimeter_speed = 30
solid_infill_speed = 60
top_solid_infill_speed = 40
bridge_speed = 30

[print:*0.10mm*]
inherits = *legacy_common*
bottom_solid_layers = 8
top_solid_layers = 9
layer_height = 0.1
bridge_flow_ratio = 0.6
infill_acceleration = 1500
infill_speed = 100
max_print_speed = 200
perimeter_speed = 85
external_perimeter_speed = 35
solid_infill_speed = 80
top_solid_infill_speed = 40
bridge_speed = 30

[print:*0.15mm*]
inherits = *legacy_common*
bottom_solid_layers = 6
top_solid_layers = 7
layer_height = 0.15
bridge_flow_ratio = 0.7
max_print_speed = 250
solid_infill_speed = 100

[print:*0.2mm*]
inherits = *legacy_common*
bottom_solid_layers = 5
top_solid_layers = 6
layer_height = 0.2
bridge_flow_ratio = 0.8

[print:*0.25mm*]
inherits = *legacy_common*
bottom_solid_layers = 4
top_solid_layers = 5
layer_height = 0.25
bridge_flow_ratio = 0.85

[print:*0.3mm*]
inherits = *legacy_common*
bottom_solid_layers = 3
top_solid_layers = 4
layer_height = 0.3
bridge_flow_ratio = 0.9

[print:*0.4mm*]
inherits = *legacy_common*
bottom_solid_layers = 2
top_solid_layers = 3
layer_height = 0.4
bridge_flow_ratio = 0.9

[print:*0.6mm*]
inherits = *legacy_common*
bottom_solid_layers = 2
top_solid_layers = 3
layer_height = 0.6
bridge_flow_ratio = 0.9

[print:*0.8mm*]
inherits = *legacy_common*
bottom_solid_layers = 2
top_solid_layers = 3
layer_height = 0.8
bridge_flow_ratio = 0.9

[print:0.05mm 0.25nozzle V2]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25

[print:0.05mm 0.3nozzle V2]
inherits = *0.05mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3

[print:0.05mm 0.4nozzle V2]
inherits = *0.05mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4

[print:0.05mm 0.5nozzle V2]
inherits = *0.05mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5

[print:0.05mm 0.25nozzle V1]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25

[print:0.05mm 0.3nozzle V1]
inherits = *0.05mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3

[print:0.05mm 0.4nozzle V1]
inherits = *0.05mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4

[print:0.05mm 0.5nozzle V1]
inherits = *0.05mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5

[print:0.05mm 0.25nozzle V0]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25

[print:0.05mm 0.3nozzle V0]
inherits = *0.05mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3

[print:0.05mm 0.4nozzle V0]
inherits = *0.05mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4

[print:0.05mm 0.5nozzle V0]
inherits = *0.05mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5

[print:0.05mm 0.25nozzle SW]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.25

[print:0.05mm 0.3nozzle SW]
inherits = *0.05mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.3

[print:0.05mm 0.4nozzle SW]
inherits = *0.05mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.4

[print:0.05mm 0.5nozzle SW]
inherits = *0.05mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.5

[print:0.10mm 0.25nozzle V2]
inherits = *0.10mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25

[print:0.10mm 0.3nozzle V2]
inherits = *0.10mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3

[print:0.10mm 0.4nozzle V2]
inherits = *0.10mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4

[print:0.10mm 0.5nozzle V2]
inherits = *0.10mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5

[print:0.10mm 0.6nozzle V2]
inherits = *0.10mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6

[print:0.10mm 0.8nozzle V2]
inherits = *0.10mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8

[print:0.10mm 0.25nozzle V1]
inherits = *0.10mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25

[print:0.10mm 0.3nozzle V1]
inherits = *0.10mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3

[print:0.10mm 0.4nozzle V1]
inherits = *0.10mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4

[print:0.10mm 0.5nozzle V1]
inherits = *0.10mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5

[print:0.10mm 0.6nozzle V1]
inherits = *0.10mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6

[print:0.10mm 0.8nozzle V1]
inherits = *0.10mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8

[print:0.10mm 0.25nozzle V0]
inherits = *0.10mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25

[print:0.10mm 0.3nozzle V0]
inherits = *0.10mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3

[print:0.10mm 0.4nozzle V0]
inherits = *0.10mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4

[print:0.10mm 0.5nozzle V0]
inherits = *0.10mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5

[print:0.10mm 0.6nozzle V0]
inherits = *0.10mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6

[print:0.10mm 0.8nozzle V0]
inherits = *0.10mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8

[print:0.10mm 0.25nozzle SW]
inherits = *0.10mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.25

[print:0.10mm 0.3nozzle SW]
inherits = *0.10mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.3

[print:0.10mm 0.4nozzle SW]
inherits = *0.10mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.4

[print:0.10mm 0.5nozzle SW]
inherits = *0.10mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.5

[print:0.10mm 0.6nozzle SW]
inherits = *0.10mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.6

[print:0.10mm 0.8nozzle SW]
inherits = *0.10mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.8

[print:0.15mm 0.25nozzle V2]
inherits = *0.15mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25

[print:0.15mm 0.3nozzle V2]
inherits = *0.15mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3

[print:0.15mm 0.4nozzle V2]
inherits = *0.15mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4

[print:0.15mm 0.5nozzle V2]
inherits = *0.15mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5

[print:0.15mm 0.6nozzle V2]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6

[print:0.15mm 0.8nozzle V2]
inherits = *0.15mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8

[print:0.15mm 1.0nozzle V2]
inherits = *0.15mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0

[print:0.15mm 1.2nozzle V2]
inherits = *0.15mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2

[print:0.15mm 0.25nozzle V1]
inherits = *0.15mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25

[print:0.15mm 0.3nozzle V1]
inherits = *0.15mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3

[print:0.15mm 0.4nozzle V1]
inherits = *0.15mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4

[print:0.15mm 0.5nozzle V1]
inherits = *0.15mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5

[print:0.15mm 0.6nozzle V1]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6

[print:0.15mm 0.8nozzle V1]
inherits = *0.15mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8

[print:0.15mm 0.25nozzle V0]
inherits = *0.15mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25

[print:0.15mm 0.3nozzle V0]
inherits = *0.15mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3

[print:0.15mm 0.4nozzle V0]
inherits = *0.15mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4

[print:0.15mm 0.5nozzle V0]
inherits = *0.15mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5

[print:0.15mm 0.6nozzle V0]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6

[print:0.15mm 0.8nozzle V0]
inherits = *0.15mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8

[print:0.15mm 1.0nozzle V0]
inherits = *0.15mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0

[print:0.15mm 1.2nozzle V0]
inherits = *0.15mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2

[print:0.15mm 0.25nozzle SW]
inherits = *0.15mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.25

[print:0.15mm 0.3nozzle SW]
inherits = *0.15mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.3

[print:0.15mm 0.4nozzle SW]
inherits = *0.15mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.4

[print:0.15mm 0.5nozzle SW]
inherits = *0.15mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.5

[print:0.15mm 0.6nozzle SW]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.6

[print:0.15mm 0.8nozzle SW]
inherits = *0.15mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.8

[print:0.15mm 1.0nozzle SW]
inherits = *0.15mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.0

[print:0.15mm 1.2nozzle SW]
inherits = *0.15mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.2

[print:0.2mm 0.3nozzle V2]
inherits = *0.2mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3

[print:0.2mm 0.4nozzle V2]
inherits = *0.2mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4

[print:0.2mm 0.5nozzle V2]
inherits = *0.2mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5

[print:0.2mm 0.6nozzle V2]
inherits = *0.2mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6

[print:0.2mm 0.8nozzle V2]
inherits = *0.2mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8

[print:0.2mm 1.0nozzle V2]
inherits = *0.2mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0

[print:0.2mm 1.2nozzle V2]
inherits = *0.2mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2

[print:0.2mm 0.25nozzle V1]
inherits = *0.2mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25

[print:0.2mm 0.3nozzle V1]
inherits = *0.2mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3

[print:0.2mm 0.4nozzle V1]
inherits = *0.2mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4

[print:0.2mm 0.5nozzle V1]
inherits = *0.2mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5

[print:0.2mm 0.6nozzle V1]
inherits = *0.2mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6

[print:0.2mm 0.8nozzle V1]
inherits = *0.2mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8

[print:0.2mm 0.3nozzle V0]
inherits = *0.2mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3

[print:0.2mm 0.4nozzle V0]
inherits = *0.2mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4

[print:0.2mm 0.5nozzle V0]
inherits = *0.2mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5

[print:0.2mm 0.6nozzle V0]
inherits = *0.2mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6

[print:0.2mm 0.8nozzle V0]
inherits = *0.2mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8

[print:0.2mm 1.0nozzle V0]
inherits = *0.2mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0

[print:0.2mm 1.2nozzle V0]
inherits = *0.2mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2

[print:0.2mm 0.25nozzle SW]
inherits = *0.2mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.25

[print:0.2mm 0.3nozzle SW]
inherits = *0.2mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.3

[print:0.2mm 0.4nozzle SW]
inherits = *0.2mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.4

[print:0.2mm 0.5nozzle SW]
inherits = *0.2mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.5

[print:0.2mm 0.6nozzle SW]
inherits = *0.2mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.6

[print:0.2mm 0.8nozzle SW]
inherits = *0.2mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.8

[print:0.2mm 1.0nozzle SW]
inherits = *0.2mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.0

[print:0.2mm 1.2nozzle SW]
inherits = *0.2mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.2

[print:0.3mm 0.4nozzle V2]
inherits = *0.3mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4

[print:0.3mm 0.5nozzle V2]
inherits = *0.3mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5

[print:0.3mm 0.6nozzle V2]
inherits = *0.3mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6

[print:0.3mm 0.8nozzle V2]
inherits = *0.3mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8

[print:0.3mm 1.0nozzle V2]
inherits = *0.3mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0

[print:0.3mm 1.2nozzle V2]
inherits = *0.3mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2

[print:0.3mm 0.25nozzle V1]
inherits = *0.3mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25

[print:0.3mm 0.3nozzle V1]
inherits = *0.3mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3

[print:0.3mm 0.4nozzle V1]
inherits = *0.3mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4

[print:0.3mm 0.5nozzle V1]
inherits = *0.3mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5

[print:0.3mm 0.6nozzle V1]
inherits = *0.3mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6

[print:0.3mm 0.8nozzle V1]
inherits = *0.3mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8

[print:0.3mm 0.4nozzle V0]
inherits = *0.3mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4

[print:0.3mm 0.5nozzle V0]
inherits = *0.3mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5

[print:0.3mm 0.6nozzle V0]
inherits = *0.3mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6

[print:0.3mm 0.8nozzle V0]
inherits = *0.3mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8

[print:0.3mm 1.0nozzle V0]
inherits = *0.3mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0

[print:0.3mm 1.2nozzle V0]
inherits = *0.3mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2

[print:0.3mm 0.25nozzle SW]
inherits = *0.3mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.25

[print:0.3mm 0.3nozzle SW]
inherits = *0.3mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.3

[print:0.3mm 0.4nozzle SW]
inherits = *0.3mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.4

[print:0.3mm 0.5nozzle SW]
inherits = *0.3mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.5

[print:0.3mm 0.6nozzle SW]
inherits = *0.3mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.6

[print:0.3mm 0.8nozzle SW]
inherits = *0.3mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.8

[print:0.3mm 1.0nozzle SW]
inherits = *0.3mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.0

[print:0.3mm 1.2nozzle SW]
inherits = *0.3mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.2

[print:0.4mm 0.6nozzle V2]
inherits = *0.4mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6

[print:0.4mm 0.8nozzle V2]
inherits = *0.4mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8

[print:0.4mm 1.0nozzle V2]
inherits = *0.4mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0

[print:0.4mm 1.2nozzle V2]
inherits = *0.4mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2

[print:0.4mm 0.25nozzle V1]
inherits = *0.4mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25

[print:0.4mm 0.3nozzle V1]
inherits = *0.4mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3

[print:0.4mm 0.4nozzle V1]
inherits = *0.4mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4

[print:0.4mm 0.5nozzle V1]
inherits = *0.4mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5

[print:0.4mm 0.6nozzle V1]
inherits = *0.4mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6

[print:0.4mm 0.8nozzle V1]
inherits = *0.4mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8

[print:0.4mm 0.6nozzle V0]
inherits = *0.4mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6

[print:0.4mm 0.8nozzle V0]
inherits = *0.4mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8

[print:0.4mm 1.0nozzle V0]
inherits = *0.4mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0

[print:0.4mm 1.2nozzle V0]
inherits = *0.4mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2

[print:0.4mm 0.25nozzle SW]
inherits = *0.4mm*; *0.25nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.25

[print:0.4mm 0.3nozzle SW]
inherits = *0.4mm*; *0.3nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.3

[print:0.4mm 0.4nozzle SW]
inherits = *0.4mm*; *0.4nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.4

[print:0.4mm 0.5nozzle SW]
inherits = *0.4mm*; *0.5nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.5

[print:0.4mm 0.6nozzle SW]
inherits = *0.4mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.6

[print:0.4mm 0.8nozzle SW]
inherits = *0.4mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.8

[print:0.4mm 1.0nozzle SW]
inherits = *0.4mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.0

[print:0.4mm 1.2nozzle SW]
inherits = *0.4mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.2

[print:0.6mm 0.8nozzle V2]
inherits = *0.6mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8

[print:0.6mm 1.0nozzle V2]
inherits = *0.6mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0

[print:0.6mm 1.2nozzle V2]
inherits = *0.6mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_2.*/ and nozzle_diameter[0]==1.2

[print:0.6mm 0.8nozzle V1]
inherits = *0.6mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8

[print:0.6mm 1.0nozzle V1]
inherits = *0.6mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==1.0

[print:0.6mm 1.2nozzle V1]
inherits = *0.6mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==1.2

[print:0.6mm 0.8nozzle V0]
inherits = *0.6mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8

[print:0.6mm 1.0nozzle V0]
inherits = *0.6mm*; *1.0nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0

[print:0.6mm 1.2nozzle V0]
inherits = *0.6mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2

[print:0.6mm 0.8nozzle SW]
inherits = *0.6mm*; *0.6nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==0.8

[print:0.6mm 1.0nozzle SW]
inherits = *0.6mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.0

[print:0.6mm 1.2nozzle SW]
inherits = *0.6mm*; *0.8nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.2

[print:0.8mm 1.2nozzle V2]
inherits = *0.8mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2

[print:0.8mm 1.2nozzle V1]
inherits = *0.8mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==1.2

[print:0.8mm 1.2nozzle V0]
inherits = *0.8mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2

[print:0.8mm 1.2nozzle SW]
inherits = *0.8mm*; *1.2nozzle*
compatible_printers_condition = printer_model=~/.*Voron_SW.*/ and nozzle_diameter[0]==1.2

[filament:*legacy_common*]
cooling = 1
compatible_printers = 
compatible_printers_condition = 
end_filament_gcode = ""
extrusion_multiplier = 1
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_load_time = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_settings_id = ""
filament_soluble = 0
filament_toolchange_delay = 0
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
min_print_speed = 15
slowdown_below_layer_time = 20
start_filament_gcode = ""

[filament:*BasicPLA*]
inherits = *legacy_common*
bed_temperature = 55
fan_below_layer_time = 100
filament_colour = #FF3232
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 55
first_layer_temperature = 215
disable_fan_first_layers = 1
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
temperature = 205

[filament:Basic PLA @VORON]
inherits = *BasicPLA*
filament_vendor = Generic
filament_max_volumetric_speed = 13
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/

[filament:Basic PLA VOLCANO @VORON]
inherits = *BasicPLA*
filament_vendor = Generic
filament_max_volumetric_speed = 20
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/

[filament:*BasicPET*]
inherits = *legacy_common*
bed_temperature = 70
cooling = 0
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #FF8000
filament_type = PET
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature =70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 30
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 245

[filament:Basic PET @VORON]
inherits = *BasicPET*
filament_vendor = Generic
filament_max_volumetric_speed = 8
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/

[filament:Basic PET VOLCANO @VORON]
inherits = *BasicPET*
filament_vendor = Generic
filament_max_volumetric_speed = 14
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/

[filament:*BasicABS*]
inherits = *legacy_common*
bed_temperature = 90
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 250
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
slowdown_below_layer_time = 15
temperature = 250

[filament:Basic ABS @VORON]
inherits = *BasicABS*
filament_vendor = Generic
filament_max_volumetric_speed = 11
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/

[filament:Basic ABS VOLCANO @VORON]
inherits = *BasicABS*
filament_vendor = Generic
filament_max_volumetric_speed = 17
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/

[filament:*kvpABS*]
inherits = *BasicABS*
bed_temperature = 105
cooling = 1
disable_fan_first_layers = 5
filament_colour = #FFFF00
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_density = 1.05
filament_cost = 22
first_layer_bed_temperature = 110
first_layer_temperature = 240
fan_always_on = 1
fan_below_layer_time = 45
max_fan_speed = 30
min_fan_speed = 15
bridge_fan_speed = 30
temperature = 235

[filament:KVP ABS @VORON]
inherits = *kvpABS*
filament_vendor = KVP
filament_max_volumetric_speed = 11
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/

[filament:KVP ABS VOLCANO @VORON]
inherits = *kvpABS*
filament_vendor = KVP
filament_max_volumetric_speed = 17
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/