[vendor]
repo_id = orcaslicer-fff
name = Chuanying
config_version = 02.03.02.60
description = Chuanying configurations
force_update = 0

[printer_model:Chuanying X1]
model_id = Chuanying-X1
nozzle_diameter = 0.25;0.4;0.6;0.8
machine_tech = FFF
family = Chuanying
bed_model = chuanying_x1_buildplate_model.STL
bed_texture = chuanying_x1_buildplate_texture.png
hotend_model = chuanying_x1_hotend.STL
default_materials = Chuanying Generic PETG;Chuanying Generic PLA

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = klipper
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
z_lift_type = NormalLift
default_print_profile = 0.20mm Standard @Chuanying X1
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_start_gcode = 
machine_end_gcode =

[printer:fdm_chuanying_common]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = marlin
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 500,500
machine_max_acceleration_retracting = 1000,1000
machine_max_acceleration_travel = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 100,100
machine_max_speed_e = 60,60
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_max_speed_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 47
extruder_clearance_height_to_rod = 34
extruder_clearance_height_to_lid = 34
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 5
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
deretraction_speed = 40
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = M25
wipe = 1
default_filament_profile = Chuanying Generic PLA
default_print_profile = 0.20mm Standard @Chuanying X1
bed_exclude_area = 0x0
machine_start_gcode = G90 ; use absolute coordinates
M83 ; extruder relative mode
M140 S[bed_temperature_initial_layer] ; set final bed temp
M104 S150 ; set temporary nozzle temp to prevent oozing during homing
G4 S10 ; allow partial nozzle warmup
G28 ; home all axis
G1 Z50 F240
G1 X2 Y10 F3000
M104 S[nozzle_temperature_initial_layer] ; set final nozzle temp
M190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize
M109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize
G1 Z0.28 F240
G92 E0
G1 Y140 E10 F1500 ; prime the nozzle
G1 X2.3 F5000
G92 E0
G1 Y10 E10 F1200 ; prime the nozzle
G92 E0
machine_end_gcode = {if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}
G1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print
{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}
{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}
M140 S0 ; turn off heatbed
M104 S0 ; turn off temperature
M107 ; turn off fan
M84 X Y E ; disable motors
layer_change_gcode = 
scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:fdm_klipper_common]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = klipper
machine_max_acceleration_e = 20000,20000
machine_max_acceleration_extruding = 50000,50000
machine_max_acceleration_retracting = 10000,10000
machine_max_acceleration_travel = 50000,50000
machine_max_acceleration_x = 50000,50000
machine_max_acceleration_y = 50000,50000
machine_max_acceleration_z = 1000,500
machine_max_speed_e = 100,100
machine_max_speed_x = 2000,2000
machine_max_speed_y = 2000,2000
machine_max_speed_z = 15,15
machine_max_jerk_e = 0,0
machine_max_jerk_x = 0,0
machine_max_jerk_y = 0,0
machine_max_jerk_z = 0,0
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 200
extruder_clearance_radius = 45
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 0.5
retract_length_toolchange = 2
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 30
deretraction_speed = 80
z_lift_type = NormalLift
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = M25
wipe = 1
default_filament_profile = Chuanying Generic ABS
default_print_profile = 0.20mm Standard @Chuanying X1
bed_exclude_area = 0x0
machine_start_gcode = BED_MESH_PROFILE LOAD=default 
M190 S[bed_temperature_initial_layer_single] ;set bed temp 
G28; 
G1 X2 Y2 Z0 F9000  ; move to corner 
M109 S[nozzle_temperature_initial_layer] ; set nozzle temp 
G1 Z0.2 F300 ; raise nozzle to 0.2
G92 E0.0 ; reset extruder distance position
G1 X60.0 E9.0 F1000.0 ; intro line
G1 X100.0 E21.5 F1000.0 ; intro line
G0 Z2

G92 E0.0 ; reset extruder distance position
machine_end_gcode = G91; //rel pos
G1 E-5 f2000
G1 Z10 F600 ; lift nozzle 10mm/s
G1 E-29 f600
M104 S0
M140 S0 ; turn off bed

M107
G90
G0 X117 Y200  F6000; move to back
M84     ; disable motors
DSLR_SNAPSHOT
RSCS_off

exhaustfan_on
TIMELAPSE_RENDER

G4 P60000 ; //Dwell for 1min
M107 
exhaustfan_off

G4 P120000

power_off ; //this is with moonraker
layer_change_gcode = ;DSLR_SNAPSHOT
TIMELAPSE_TAKE_FRAME
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:fdm_x1_common]
inherits = fdm_chuanying_common
from = system
instantiation = false
gcode_flavor = klipper
printable_area = -110x-110,110x-110,110x110,-110x110
printable_height = 220
auxiliary_fan = 1
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 20000,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,20000
machine_max_acceleration_x = 20000,20000
machine_max_acceleration_y = 20000,20000
machine_max_acceleration_z = 500,500
machine_max_speed_e = 30,30
machine_max_speed_x = 600,600
machine_max_speed_y = 600,600
machine_max_speed_z = 20,20
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 3,3
printer_settings_id = Chuanying
retraction_minimum_travel = 1
retract_before_wipe = 100%
retract_length_toolchange = 2
deretraction_speed = 35
z_hop = 0.4
single_extruder_multi_material = 0
change_filament_gcode = 
machine_pause_gcode = M25
default_filament_profile = Chuanying Generic PLA
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M104 S[nozzle_temperature_initial_layer]
G90
M83
G1 Z5 F6000
G1 E-0.2 F800
G1 X110 Y-110 F6000
G1 E2 F800
G1 Y-110 X55 Z0.25 F4800
G1 X-55 E8 F2400
G1 Y-109.6 F2400
G1 X55 E5 F2400
G1 Y-110 X55 Z0.45 F4800
G1 X-55 E8 F2400
G1 Y-109.6 F2400
G1 X55 E5 F2400
G92 E0
machine_end_gcode = G1 E-3 F3600
G0 X50 Y50 F30000
M104 S0 ; turn off temperature
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0
thumbnails = 140x110
use_relative_e_distances = 1
z_hop_types = Auto Lift
retraction_speed = 35
wipe_distance = 2
extruder_clearance_radius = 76
extruder_clearance_height_to_rod = 27
extruder_clearance_height_to_lid = 150

[printer:Chuanying X1 0.25 Nozzle]
inherits = fdm_x1_common
from = system
setting_id = GM006
instantiation = true
printer_model = Chuanying X1
default_print_profile = 0.12mm Standard @Chuanying X1 0.25 Nozzle
nozzle_diameter = 0.25
printer_variant = 0.25
max_layer_height = 0.14
min_layer_height = 0.08
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M104 S[nozzle_temperature_initial_layer]
G1 Z5 F6000
G90 E0
M83
G1 E-1 F600
G1 E8 F300
G1 X85 Y110 Z0.2 F1200
G1 X-110 E15 F2400
G1 Y0 E4 F2400
G1 X-109.6 F2400
G1 Y110 E5 F2400
G92 E0
retraction_length = 1
z_hop = 0.3
nozzle_type = stainless_steel

[printer:Chuanying X1 0.4 Nozzle]
inherits = fdm_x1_common
from = system
setting_id = GM001
instantiation = true
printer_model = Chuanying X1
default_print_profile = 0.20mm Standard @Chuanying X1 0.4 Nozzle
nozzle_diameter = 0.4
printer_variant = 0.4
max_layer_height = 0.28
min_layer_height = 0.08
retraction_length = 0.8
nozzle_type = stainless_steel

[printer:Chuanying X1 0.6 Nozzle]
inherits = fdm_x1_common
from = system
setting_id = GM001
instantiation = true
printer_model = Chuanying X1
default_print_profile = 0.30mm Standard @Chuanying X1 0.6 Nozzle
nozzle_diameter = 0.6
printer_variant = 0.6
max_layer_height = 0.4
min_layer_height = 0.15
retraction_length = 1.2
nozzle_type = hardened_steel

[printer:Chuanying X1 0.8 Nozzle]
inherits = fdm_x1_common
from = system
setting_id = GM005
instantiation = true
printer_model = Chuanying X1
default_print_profile = 0.40mm Standard @Chuanying X1 0.8 Nozzle
nozzle_diameter = 0.8
printer_variant = 0.8
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M104 S[nozzle_temperature_initial_layer]
G1 Z5 F6000
G1 E-1.5 F600
G1 E12 F800
G1 X85 Y110 Z0.3 F1200
G1 X-110 E30 F2400
G1 Y0 E8 F2400
G1 X-109.6 F2400
G1 Y110 E10 F2400
G92 E0
max_layer_height = 0.56
min_layer_height = 0.15
retraction_length = 1.5
nozzle_type = hardened_steel
z_hop = 0

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.42
outer_wall_speed = 120
line_width = 0.45
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 20
gap_infill_speed = 30
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 15%
sparse_infill_speed = 50
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 2
inner_wall_line_width = 0.45
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.45
internal_solid_infill_speed = 40
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.15
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 30
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.42
top_surface_speed = 30
travel_speed = 400
enable_prime_tower = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers =

[print:fdm_process_chuanying_common]
inherits = fdm_process_common
from = system
instantiation = false
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 1
brim_object_gap = 0.1
compatible_printers_condition = 
draft_shield = disabled
elefant_foot_compensation = 0.15
enable_arc_fitting = 1
outer_wall_acceleration = 5000
wall_infill_order = inner wall/outer wall/infill
line_width = 0.42
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 500
travel_acceleration = 10000
inner_wall_acceleration = 5000
initial_layer_line_width = 0.50
sparse_infill_speed = 100
ironing_flow = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 40
overhang_3_4_speed = 20
overhang_4_4_speed = 10
only_one_wall_top = 1
seam_position = aligned
skirt_height = 1
skirt_loops = 2
brim_type = no_brim
exclude_object = 0
wall_generator = classic
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.42
resolution = 0.012
support_type = normal(auto)
support_style = default
support_top_z_distance = 0.18
support_bottom_z_distance = 0.18
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.3
tree_support_branch_angle = 45
tree_support_wall_count = 0
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 5
top_shell_thickness = 1
initial_layer_speed = 50
initial_layer_infill_speed = 65
internal_solid_infill_speed = 150
top_surface_speed = 200
travel_speed = 500
wipe_tower_no_sparse_layers = 0
compatible_printers =

[print:fdm_process_chuanying_0.20]
inherits = fdm_process_chuanying_common
from = system
instantiation = false
initial_layer_infill_speed = 80
outer_wall_speed = 200
inner_wall_speed = 300
internal_solid_infill_speed = 250
gap_infill_speed = 200
sparse_infill_speed = 270
small_perimeter_speed = 50%
overhang_speed_classic = 0
internal_bridge_speed = 50
internal_solid_infill_acceleration = 7000
accel_to_decel_enable = 0
filter_out_gap_fill = 0.5
gcode_label_objects = 0
slow_down_layers = 1
wipe_speed = 200

[print:fdm_process_chuanying_0.30]
inherits = fdm_process_chuanying_common
from = system
instantiation = false
layer_height = 0.3
initial_layer_print_height = 0.3
line_width = 0.62
outer_wall_line_width = 0.62
initial_layer_line_width = 0.62
sparse_infill_line_width = 0.62
inner_wall_line_width = 0.62
internal_solid_infill_line_width = 0.62
support_line_width = 0.62
top_surface_line_width = 0.62
initial_layer_speed = 45
inner_wall_speed = 150
top_surface_speed = 120
gap_infill_speed = 150
small_perimeter_speed = 50%
overhang_speed_classic = 0
internal_bridge_speed = 50
internal_solid_infill_acceleration = 7000
accel_to_decel_enable = 0
filter_out_gap_fill = 0.5
gcode_label_objects = 0
slow_down_layers = 1
wipe_speed = 200

[print:0.20mm Standard @Chuanying X1 0.4 Nozzle]
inherits = fdm_process_chuanying_0.20
from = system
setting_id = GP001
instantiation = true
compatible_printers = Chuanying X1 0.4 Nozzle
only_one_wall_top = 0
infill_wall_overlap = 50%

[print:0.30mm Standard @Chuanying X1 0.6 Nozzle]
inherits = fdm_process_chuanying_0.30
from = system
setting_id = GP003
instantiation = true
compatible_printers = Chuanying X1 0.6 Nozzle
only_one_wall_top = 0
infill_wall_overlap = 50%

[print:0.12mm Standard @Chuanying X1 0.25 Nozzle]
inherits = 0.20mm Standard @Chuanying X1 0.4 Nozzle
from = system
setting_id = GP012
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
print_settings_id = 0.12mm Standard @Chuanying X1 0.25 Nozzle
bottom_shell_layers = 4
brim_width = 3
elefant_foot_compensation = 0
gap_infill_speed = 150
initial_layer_acceleration = 1000
initial_layer_infill_speed = 70
initial_layer_line_width = 0.3
initial_layer_print_height = 0.15
initial_layer_speed = 35
inner_wall_line_width = 0.3
inner_wall_speed = 150
internal_solid_infill_line_width = 0.3
internal_solid_infill_speed = 150
layer_height = 0.12
line_width = 0.25
outer_wall_line_width = 0.25
outer_wall_speed = 60
skirt_loops = 0
sparse_infill_line_width = 0.3
sparse_infill_speed = 100
support_bottom_z_distance = 0.12
support_interface_spacing = 0.25
support_line_width = 0.25
support_object_xy_distance = 0.2
support_speed = 80
support_top_z_distance = 0.12
top_shell_layers = 7
top_shell_thickness = 0.8
top_surface_line_width = 0.3
top_surface_speed = 150
tree_support_tip_diameter = 1.2
wipe_speed = 80%

[print:0.40mm Standard @Chuanying X1 0.8 Nozzle]
inherits = 0.30mm Standard @Chuanying X1 0.6 Nozzle
from = system
setting_id = GP002
instantiation = true
compatible_printers = Chuanying X1 0.8 Nozzle
print_settings_id = 0.40mm Standard @Chuanying X1 0.8 Nozzle
elefant_foot_compensation = 0
initial_layer_infill_speed = 55
initial_layer_line_width = 0.85
initial_layer_speed = 35
inner_wall_line_width = 0.85
internal_solid_infill_acceleration = 5000
internal_solid_infill_line_width = 0.82
layer_height = 0.4
line_width = 0.82
outer_wall_line_width = 0.82
skirt_loops = 0
sparse_infill_line_width = 0.85
support_bottom_interface_spacing = 0.4
support_bottom_z_distance = 0.22
support_interface_spacing = 0.4
support_line_width = 0.82
support_object_xy_distance = 0.4
support_top_z_distance = 0.22
top_shell_layers = 4
top_shell_thickness = 0.8
top_surface_line_width = 0.82
tree_support_tip_diameter = 1.2
wipe_speed = 60%

[filament:Chuanying Generic ABS]
inherits = fdm_filament_abs
from = system
setting_id = GFSA04
filament_id = GFB99
instantiation = true
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 15
slow_down_layer_time = 8
support_material_interface_fan_speed = 80
slow_down_min_speed = 20
filament_start_gcode = ; filament start gcode
;right_extruder_material: ABS

filament_end_gcode = ; filament end gcode

filament_diameter = 1.75
enable_pressure_advance = 1
pressure_advance = 0.04
filament_density = 1.04
temperature_vitrification = 100
hot_plate_temp_initial_layer = 105
hot_plate_temp = 105
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle

[filament:Chuanying Generic ASA]
inherits = fdm_filament_asa
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
additional_cooling_fan_speed = 0
bed_temperature_difference = 10
chamber_temperature = 0
close_fan_the_first_x_layers = 2
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cool_plate_temp = 60
cool_plate_temp_initial_layer = 60
default_filament_colour = 
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 60
eng_plate_temp_initial_layer = 60
fan_cooling_layer_time = 30
fan_max_speed = 20
fan_min_speed = 10
filament_cost = 20
filament_density = 1.04
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_flow_ratio = 0.98
filament_is_support = 0
filament_max_volumetric_speed = 18
filament_minimal_purge_on_wipe_tower = 15
filament_retract_before_wipe = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying  ASA
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode 
;right_extruder_material:ASA
filament_end_gcode = ; filament end gcode

filament_type = ASA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp = 105
hot_plate_temp_initial_layer = 105
nozzle_temperature = 260
nozzle_temperature_initial_layer = 260
nozzle_temperature_range_high = 270
nozzle_temperature_range_low = 230
overhang_fan_speed = 80
overhang_fan_threshold = 25%
pressure_advance = 0.04
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
slow_down_layer_time = 5
slow_down_min_speed = 20
support_material_interface_fan_speed = 80
temperature_vitrification = 100
textured_plate_temp = 60
textured_plate_temp_initial_layer = 60

[filament:Chuanying Generic HS PLA]
inherits = fdm_filament_pla
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
bed_temperature_difference = 10
chamber_temperature = 0
close_fan_the_first_x_layers = 1
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cool_plate_temp = 60
cool_plate_temp_initial_layer = 60
default_filament_colour = 
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 60
eng_plate_temp_initial_layer = 60
fan_cooling_layer_time = 100
fan_max_speed = 100
fan_min_speed = 100
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 20
filament_density = 1.24
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 0.98
filament_is_support = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 25
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = 
filament_ramming_parameters = 120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6
filament_retract_before_wipe = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_lift_enforce = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying HS PLA
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode
;right_extruder_material:HS PLA

filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp_initial_layer = 55
hot_plate_temp = 50
nozzle_temperature = 220
nozzle_temperature_initial_layer = 220
nozzle_temperature_range_high = 230
nozzle_temperature_range_low = 190
overhang_fan_speed = 100
overhang_fan_threshold = 50%
pressure_advance = 0.025
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
temperature_vitrification = 60
textured_plate_temp = 60
textured_plate_temp_initial_layer = 60
slow_down_layer_time = 6
slow_down_min_speed = 20
support_material_interface_fan_speed = 100
additional_cooling_fan_speed = 100

[filament:Chuanying Generic PETG]
inherits = fdm_filament_pet
from = system
setting_id = GFSA04
filament_id = GFG99
instantiation = true
filament_flow_ratio = 1
filament_max_volumetric_speed = 12
slow_down_layer_time = 8
temperature_vitrification = 70
hot_plate_temp_initial_layer = 70
hot_plate_temp = 70
close_fan_the_first_x_layers = 1
slow_down_min_speed = 30
overhang_fan_speed = 80
support_material_interface_fan_speed = 90
additional_cooling_fan_speed = 50
filament_start_gcode = ; filament start gcode 
;right_extruder_material:PETG
filament_end_gcode = ; filament end gcode

filament_diameter = 1.75
enable_pressure_advance = 1
pressure_advance = 0.046
filament_density = 1.27
nozzle_temperature_range_low = 220
nozzle_temperature_range_high = 260
nozzle_temperature_initial_layer = 255
nozzle_temperature = 255
fan_cooling_layer_time = 30
fan_max_speed = 90
fan_min_speed = 40
overhang_fan_threshold = 25%
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle

[filament:Chuanying Generic PLA]
inherits = fdm_filament_pla
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 25
hot_plate_temp_initial_layer = 55
hot_plate_temp = 50
slow_down_layer_time = 6
slow_down_min_speed = 20
support_material_interface_fan_speed = 100
additional_cooling_fan_speed = 100
filament_start_gcode = ; filament start gcode
;right_extruder_material: PLA

filament_end_gcode = ; filament end gcode

filament_diameter = 1.75
enable_pressure_advance = 1
pressure_advance = 0.025
nozzle_temperature_initial_layer = 220
nozzle_temperature = 220
nozzle_temperature_range_high = 230
nozzle_temperature_range_low = 190
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle

[filament:Chuanying Generic PLA-Silk]
inherits = fdm_filament_pla
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
filament_flow_ratio = 1
filament_max_volumetric_speed = 12
hot_plate_temp_initial_layer = 55
hot_plate_temp = 50
slow_down_layer_time = 8
slow_down_min_speed = 20
support_material_interface_fan_speed = 100
additional_cooling_fan_speed = 100
filament_start_gcode = ; filament start gcode
;right_extruder_material: PLA Silk

filament_end_gcode = ; filament end gcode

filament_diameter = 1.75
enable_pressure_advance = 1
pressure_advance = 0.025
nozzle_temperature_initial_layer = 220
nozzle_temperature = 220
nozzle_temperature_range_high = 230
nozzle_temperature_range_low = 190
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle

[filament:Chuanying ABS @Chuanying X1 0.25 Nozzle]
inherits = Chuanying Generic ABS
from = system
setting_id = GFSA04_02
filament_id = GFB99
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
filament_settings_id = Chuanying ABS @Chuanying X1 0.25 Nozzle
fan_max_speed = 50
filament_cost = 40
filament_flow_ratio = 1
filament_max_volumetric_speed = 2
pressure_advance = 0.1

[filament:Chuanying Generic HIPS]
inherits = Chuanying Generic ABS
from = system
setting_id = GFSA04
filament_id = GFB99
instantiation = true
activate_air_filtration = 0
activate_chamber_temp_control = 0
additional_cooling_fan_speed = 0
chamber_temperature = 0
close_fan_the_first_x_layers = 2
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
complete_print_exhaust_fan_speed = 80
cool_plate_temp = 80
cool_plate_temp_initial_layer = 80
default_filament_colour = 
during_print_exhaust_fan_speed = 60
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 80
eng_plate_temp_initial_layer = 80
fan_cooling_layer_time = 30
fan_max_speed = 30
fan_min_speed = 10
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 20
filament_density = 1.04
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_end_gcode = ; filament end gcode

filament_flow_ratio = 1.01
filament_is_support = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 5
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = 
filament_ramming_parameters = 120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6
filament_retract_before_wipe = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_lift_enforce = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying Generic HIPS
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode

filament_toolchange_delay = 0
filament_type = HIPS
filament_unload_time = 0
filament_unloading_speed = 35
filament_unloading_speed_start = 40
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp = 105
hot_plate_temp_initial_layer = 105
nozzle_temperature = 240
nozzle_temperature_initial_layer = 240
nozzle_temperature_range_high = 250
nozzle_temperature_range_low = 220
overhang_fan_speed = 50
overhang_fan_threshold = 25%
pressure_advance = 0.036
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
slow_down_layer_time = 8
slow_down_min_speed = 20
support_material_interface_fan_speed = 40
temperature_vitrification = 100
textured_plate_temp = 80
textured_plate_temp_initial_layer = 80

[filament:Chuanying ASA @Chuanying X1 0.25 Nozzle]
inherits = Chuanying Generic ASA
from = system
setting_id = GFSA04_05
filament_id = GFL99
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
filament_settings_id = Chuanying ASA @Chuanying X1 0.25 Nozzle
fan_max_speed = 50
filament_cost = 40
filament_flow_ratio = 1
filament_max_volumetric_speed = 2
filament_start_gcode = ; filament start gcode
;right_extruder_material: ASA

pressure_advance = 0.1

[filament:Chuanying HS PLA @Chuanying X1 0.25 Nozzle]
inherits = Chuanying Generic HS PLA
from = system
setting_id = GFSA04_09
filament_id = GFL99
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
filament_settings_id = Chuanying HS PLA @Chuanying X1 0.25 Nozzle
activate_air_filtration = 1
complete_print_exhaust_fan_speed = 100
during_print_exhaust_fan_speed = 100
filament_flow_ratio = 1
filament_max_volumetric_speed = 2
filament_start_gcode = ; filament start gcode
;right_extruder_material: HS PLA

hot_plate_temp = 45
hot_plate_temp_initial_layer = 50
nozzle_temperature = 210
pressure_advance = 0.1
slow_down_min_speed = 15

[filament:Chuanying PETG @Chuanying X1 0.25 Nozzle]
inherits = Chuanying Generic PETG
from = system
setting_id = GFSA04_12
filament_id = GFG99
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
filament_settings_id = Chuanying PETG @Chuanying X1 0.25 Nozzle
fan_max_speed = 80
filament_max_volumetric_speed = 1.5
pressure_advance = 0.1
slow_down_min_speed = 15

[filament:Chuanying Generic PVA]
inherits = Chuanying Generic PLA
from = system
setting_id = GFSA04
filament_id = GFB99
instantiation = true
activate_air_filtration = 0
activate_chamber_temp_control = 0
additional_cooling_fan_speed = 80
chamber_temperature = 0
close_fan_the_first_x_layers = 1
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
complete_print_exhaust_fan_speed = 80
cool_plate_temp = 60
cool_plate_temp_initial_layer = 55
default_filament_colour = 
during_print_exhaust_fan_speed = 60
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 60
eng_plate_temp_initial_layer = 55
fan_cooling_layer_time = 100
fan_max_speed = 100
fan_min_speed = 50
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 20
filament_density = 1.2
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_end_gcode = ; filament end gcode

filament_flow_ratio = 1
filament_is_support = 1
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 5
filament_minimal_purge_on_wipe_tower = 5
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = 
filament_ramming_parameters = 120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6
filament_retract_before_wipe = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_lift_enforce = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying Generic PVA
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode
;right_extruder_material: PVA
filament_toolchange_delay = 0
filament_type = PVA
filament_unload_time = 0
filament_unloading_speed = 35
filament_unloading_speed_start = 40
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp = 50
hot_plate_temp_initial_layer = 55
nozzle_temperature = 220
nozzle_temperature_initial_layer = 220
nozzle_temperature_range_high = 230
nozzle_temperature_range_low = 200
overhang_fan_speed = 100
overhang_fan_threshold = 50%
pressure_advance = 0.025
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
slow_down_layer_time = 6
slow_down_min_speed = 10
support_material_interface_fan_speed = 80
temperature_vitrification = 60
textured_plate_temp = 60
textured_plate_temp_initial_layer = 55

[filament:Chuanying PLA @Chuanying X1 0.25 Nozzle]
inherits = Chuanying Generic PLA
from = system
setting_id = GFSA04_19
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
filament_settings_id = Chuanying PLA @Chuanying X1 0.25 Nozzle
activate_air_filtration = 1
complete_print_exhaust_fan_speed = 100
during_print_exhaust_fan_speed = 100
filament_flow_ratio = 1
filament_max_volumetric_speed = 2.8
hot_plate_temp = 45
hot_plate_temp_initial_layer = 50
overhang_fan_threshold = 25%
pressure_advance = 0.1
slow_down_layer_time = 8
slow_down_min_speed = 15

[filament:Chuanying PLA-SILK @Chuanying X1 0.25 Nozzle]
inherits = Chuanying Generic PLA-Silk
from = system
setting_id = GFSA04_25
filament_id = GFL99
instantiation = true
compatible_printers = Chuanying X1 0.25 Nozzle
filament_settings_id = Chuanying PLA-SILK @Chuanying X1 0.25 Nozzle
activate_air_filtration = 1
complete_print_exhaust_fan_speed = 100
during_print_exhaust_fan_speed = 100
filament_flow_ratio = 1
filament_max_volumetric_speed = 2.8
filament_start_gcode = ; filament start gcode
;right_extruder_material: PLA-Silk

hot_plate_temp = 45
hot_plate_temp_initial_layer = 50
nozzle_temperature = 217
pressure_advance = 0.1
slow_down_layer_time = 8
slow_down_min_speed = 15

[filament:Chuanying Generic PETG-CF10]
inherits = fdm_filament_pet
from = system
setting_id = GFSA04
filament_id = GFG99
instantiation = true
additional_cooling_fan_speed = 100
bed_temperature_difference = 10
chamber_temperature = 0
close_fan_the_first_x_layers = 1
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cool_plate_temp = 60
cool_plate_temp_initial_layer = 60
default_filament_colour = 
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 60
eng_plate_temp_initial_layer = 60
fan_cooling_layer_time = 30
fan_max_speed = 90
fan_min_speed = 40
filament_cost = 30
filament_density = 1.27
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
filament_is_support = 0
filament_max_volumetric_speed = 12
filament_minimal_purge_on_wipe_tower = 15
filament_retract_before_wipe = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying PETG-CF10
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode
;right_extruder_material:PETG-CF10

filament_type = PETG-CF
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp = 70
hot_plate_temp_initial_layer = 70
nozzle_temperature = 245
nozzle_temperature_initial_layer = 245
nozzle_temperature_range_high = 260
nozzle_temperature_range_low = 220
overhang_fan_speed = 90
overhang_fan_threshold = 25%
pressure_advance = 0.035
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
slow_down_layer_time = 8
slow_down_min_speed = 20
support_material_interface_fan_speed = 100
temperature_vitrification = 70
textured_plate_temp = 60
textured_plate_temp_initial_layer = 60

[filament:Chuanying Generic PLA-CF10]
inherits = fdm_filament_pla
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
additional_cooling_fan_speed = 100
bed_temperature_difference = 10
chamber_temperature = 0
close_fan_the_first_x_layers = 1
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cool_plate_temp = 60
cool_plate_temp_initial_layer = 60
default_filament_colour = 
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 60
eng_plate_temp_initial_layer = 60
fan_cooling_layer_time = 100
fan_max_speed = 100
fan_min_speed = 100
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 20
filament_density = 1.24
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
filament_is_support = 0
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 20
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = 
filament_ramming_parameters = 120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6
filament_retract_before_wipe = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_lift_enforce = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying PLA
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode
;right_extruder_material:PLA-CF10

filament_toolchange_delay = 0
filament_type = PLA-CF
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp_initial_layer = 55
hot_plate_temp = 50
nozzle_temperature = 220
nozzle_temperature_initial_layer = 220
nozzle_temperature_range_high = 230
nozzle_temperature_range_low = 190
overhang_fan_speed = 100
overhang_fan_threshold = 50%
pressure_advance = 0.025
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
slow_down_layer_time = 8
slow_down_min_speed = 20
support_material_interface_fan_speed = 100
temperature_vitrification = 60
textured_plate_temp = 60
textured_plate_temp_initial_layer = 60

[filament:Chuanying Generic TPU]
inherits = fdm_filament_tpu
from = system
setting_id = GFSA04
filament_id = GFG99
instantiation = true
additional_cooling_fan_speed = 100
bed_temperature_difference = 10
chamber_temperature = 0
close_fan_the_first_x_layers = 1
compatible_printers = Chuanying X1 0.4 Nozzle,Chuanying X1 0.6 Nozzle,Chuanying X1 0.8 Nozzle,Chuanying Adventurer 5M 0.4 Nozzle,Chuanying Adventurer 5M 0.6 Nozzle,Chuanying Adventurer 5M 0.8 Nozzle,Chuanying Adventurer 5M Pro 0.4 Nozzle,Chuanying Adventurer 5M Pro 0.6 Nozzle,Chuanying Adventurer 5M Pro 0.8 Nozzle
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cool_plate_temp = 60
cool_plate_temp_initial_layer = 60
default_filament_colour = 
enable_overhang_bridge_fan = 1
enable_pressure_advance = 1
eng_plate_temp = 60
eng_plate_temp_initial_layer = 60
fan_cooling_layer_time = 100
fan_max_speed = 100
fan_min_speed = 100
filament_cost = 20
filament_density = 1.24
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
filament_is_support = 0
filament_max_volumetric_speed = 3.5
filament_minimal_purge_on_wipe_tower = 15
filament_retract_before_wipe = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = 1.2
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = Chuanying TPU
filament_shrink = 100%
filament_soluble = 0
filament_start_gcode = ; filament start gcode
;right_extruder_material:TPU

filament_type = TPU
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
filament_z_hop_types = nil
full_fan_speed_layer = 0
hot_plate_temp = 45
hot_plate_temp_initial_layer = 45
nozzle_temperature = 235
nozzle_temperature_initial_layer = 235
nozzle_temperature_range_high = 250
nozzle_temperature_range_low = 190
overhang_fan_speed = 100
overhang_fan_threshold = 50%
pressure_advance = 0.035
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 0
slow_down_for_layer_cooling = 1
slow_down_layer_time = 8
slow_down_min_speed = 20
support_material_interface_fan_speed = 100
temperature_vitrification = 60
textured_plate_temp = 60
textured_plate_temp_initial_layer = 60