[vendor]
repo_id = orcaslicer-fff
name = Cubicon
config_version = 02.03.02.60
description = Cubicon configurations
force_update = 0

[printer_model:Cubicon xCeler-I]
nozzle_diameter = 0.4
bed_model = 
bed_texture = Cubicon xCeler-I_bed_texture.svg
family = Cubicon
machine_tech = FFF
default_materials = Cubicon PLA @Cubicon xCeler-I

[printer_model:Cubicon xCeler-Plus]
nozzle_diameter = 0.4
bed_model = 
bed_texture = Cubicon xCeler-I_bed_texture.svg
family = Cubicon
machine_tech = FFF
default_materials = Cubicon PLA @Cubicon xCeler-Plus

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
support_chamber_temp_control = 0
support_air_filtration = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 500
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
z_hop_types = Normal Lift
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

default_print_profile = 0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle
machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end

[printer:Cubicon xCeler-I 0.4 nozzle]
inherits = fdm_machine_common
from = system
instantiation = true
adaptive_bed_mesh_margin = 0
auxiliary_fan = 1
bbl_use_printhost = 0
bed_custom_model = 
bed_custom_texture = 
bed_exclude_area = 0x0
bed_mesh_max = 99999,99999
bed_mesh_min = -99999,-99999
bed_mesh_probe_distance = 50,50
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

best_object_pos = 0.5,0.5
change_extrusion_role_gcode = 
change_filament_gcode = 
cooling_tube_length = 0
cooling_tube_retraction = 0
default_filament_profile = Cubicon PLA @Cubicon xCeler-I
default_print_profile = cubicon default @base
deretraction_speed = 30
disable_m73 = 0
emit_machine_limits_to_gcode = 1
enable_filament_ramming = 0
enable_long_retraction_when_cut = 0
extra_loading_move = 0
extruder_clearance_height_to_lid = 140
extruder_clearance_height_to_rod = 36
extruder_clearance_radius = 65
extruder_colour = #FCE94F
extruder_offset = 0x0
fan_kickstart = 0
fan_speedup_overhangs = 1
fan_speedup_time = 0
gcode_flavor = klipper
head_wrap_detect_zone = 
high_current_on_filament_swap = 0
host_type = octoprint
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
long_retractions_when_cut = 0
machine_end_gcode = END_PRINT
machine_load_filament_time = 0
machine_max_acceleration_e = 500,5000
machine_max_acceleration_extruding = 5000,20000
machine_max_acceleration_x = 13000,20000
machine_max_acceleration_y = 13000,20000
machine_max_acceleration_z = 250,500
machine_max_speed_z = 25,12
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 13000,13000
machine_max_jerk_e = 20,20
machine_max_jerk_x = 20,20
machine_max_jerk_y = 20,20
machine_max_jerk_z = 20,20
machine_max_junction_deviation = 0,0
machine_max_speed_e = 50,50
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
machine_pause_gcode = PAUSE
machine_start_gcode = START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_tool_change_time = 0
machine_unload_filament_time = 0
manual_filament_change = 0
max_layer_height = 0.3
min_layer_height = 0.1
nozzle_diameter = 0.4
nozzle_height = 4
nozzle_hrc = 0
nozzle_type = brass
nozzle_volume = 0
parking_pos_retraction = 0
pellet_modded_printer = 0
preferred_orientation = 0
print_host = 
print_host_webui = 
printable_area = 0x0,250x0,250x250,0x250
printable_height = 290
printer_model = Cubicon xCeler-I
printer_notes = 
printer_settings_id = Cubicon xCeler-I 0.4 nozzle
printer_structure = undefine
printer_technology = FFF
printer_variant = 0.4
printhost_apikey = 
printhost_authorization_type = key
printhost_cafile = 
printhost_password = 
printhost_port = 
printhost_ssl_ignore_revoke = 0
printhost_user = 
printing_by_object_gcode = 
purge_in_prime_tower = 0
retract_before_wipe = 0%
retract_length_toolchange = 1
retract_lift_above = 0
retract_lift_below = 0
retract_lift_enforce = All Surfaces
retract_on_top_layer = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_when_changing_layer = 0
retraction_distances_when_cut = 18
retraction_length = 0.8
retraction_minimum_travel = 1
retraction_speed = 30
scan_first_layer = 0
silent_mode = 0
single_extruder_multi_material = 1
support_air_filtration = 0
support_chamber_temp_control = 0
support_multi_bed_types = 0
template_custom_gcode = 
thumbnails = 48x48/PNG, 300x300/PNG
thumbnails_format = PNG
time_cost = 0
time_lapse_gcode = 
travel_slope = 3
upward_compatible_machine = 
use_firmware_retraction = 0
use_relative_e_distances = 1
wipe = 0
wipe_distance = 2
z_hop = 0.2
z_hop_types = Normal Lift
z_offset = 0

[printer:Cubicon xCeler-Plus 0.4 nozzle]
inherits = fdm_machine_common
from = system
instantiation = true
adaptive_bed_mesh_margin = 0
auxiliary_fan = 1
bbl_use_printhost = 0
bed_custom_model = 
bed_custom_texture = 
bed_exclude_area = 0x0
bed_mesh_max = 99999,99999
bed_mesh_min = -99999,-99999
bed_mesh_probe_distance = 50,50
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

best_object_pos = 0.5,0.5
change_extrusion_role_gcode = 
change_filament_gcode = 
cooling_tube_length = 0
cooling_tube_retraction = 0
default_filament_profile = Cubicon PLA @Cubicon xCeler-Plus
default_print_profile = cubicon default @base
deretraction_speed = 30
disable_m73 = 0
emit_machine_limits_to_gcode = 1
enable_filament_ramming = 0
enable_long_retraction_when_cut = 0
extra_loading_move = 0
extruder_clearance_height_to_lid = 140
extruder_clearance_height_to_rod = 36
extruder_clearance_radius = 65
extruder_colour = #FCE94F
extruder_offset = 0x0
fan_kickstart = 0
fan_speedup_overhangs = 1
fan_speedup_time = 0
gcode_flavor = klipper
head_wrap_detect_zone = 
high_current_on_filament_swap = 0
host_type = octoprint
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
long_retractions_when_cut = 0
machine_end_gcode = END_PRINT
machine_load_filament_time = 0
machine_max_acceleration_e = 500,5000
machine_max_acceleration_extruding = 5000,20000
machine_max_acceleration_x = 13000,20000
machine_max_acceleration_y = 13000,20000
machine_max_acceleration_z = 250,500
machine_max_speed_z = 25,12
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 13000,13000
machine_max_jerk_e = 20,20
machine_max_jerk_x = 20,20
machine_max_jerk_y = 20,20
machine_max_jerk_z = 20,20
machine_max_junction_deviation = 0,0
machine_max_speed_e = 50,50
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
machine_pause_gcode = PAUSE
machine_start_gcode = START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_tool_change_time = 0
machine_unload_filament_time = 0
manual_filament_change = 0
max_layer_height = 0.3
min_layer_height = 0.1
nozzle_diameter = 0.4
nozzle_height = 4
nozzle_hrc = 0
nozzle_type = brass
nozzle_volume = 0
parking_pos_retraction = 0
pellet_modded_printer = 0
preferred_orientation = 0
print_host = 
print_host_webui = 
printable_area = 0x0,310x0,310x310,0x310
printable_height = 310
printer_model = Cubicon xCeler-Plus
printer_notes = 
printer_settings_id = Cubicon xCeler-Plus 0.4 nozzle
printer_structure = undefine
printer_technology = FFF
printer_variant = 0.4
printhost_apikey = 
printhost_authorization_type = key
printhost_cafile = 
printhost_password = 
printhost_port = 
printhost_ssl_ignore_revoke = 0
printhost_user = 
printing_by_object_gcode = 
purge_in_prime_tower = 0
retract_before_wipe = 0%
retract_length_toolchange = 1
retract_lift_above = 0
retract_lift_below = 0
retract_lift_enforce = All Surfaces
retract_on_top_layer = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_when_changing_layer = 0
retraction_distances_when_cut = 18
retraction_length = 0.8
retraction_minimum_travel = 1
retraction_speed = 30
scan_first_layer = 0
silent_mode = 0
single_extruder_multi_material = 1
support_air_filtration = 0
support_chamber_temp_control = 0
support_multi_bed_types = 0
template_custom_gcode = 
thumbnails = 48x48/PNG, 300x300/PNG
thumbnails_format = PNG
time_cost = 0
time_lapse_gcode = 
travel_slope = 3
upward_compatible_machine = 
use_firmware_retraction = 0
use_relative_e_distances = 1
wipe = 0
wipe_distance = 2
z_hop = 0.2
z_hop_types = Normal Lift
z_offset = 0

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
compatible_printers = 
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.4
outer_wall_speed = 120
line_width = 0.45
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 20
gap_infill_speed = 30
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 25%
sparse_infill_speed = 50
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 3
inner_wall_line_width = 0.45
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.45
internal_solid_infill_speed = 40
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.15
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 30
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.4
top_surface_speed = 30
travel_speed = 400
enable_prime_tower = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0

[print:fdm_process_common_klipper]
inherits = fdm_process_common
from = system
instantiation = false
default_jerk = 9
initial_layer_jerk = 9
outer_wall_jerk = 7
infill_jerk = 12
travel_jerk = 12
inner_wall_jerk = 7
top_surface_jerk = 7
exclude_object = 1

[print:cubicon common @base]
inherits = fdm_process_common_klipper
instantiation = false
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
print_settings_id = cubicon common @base
accel_to_decel_enable = 1
accel_to_decel_factor = 100
bridge_angle = 0
bridge_flow = 0.9
internal_bridge_flow = 0.9
brim_type = no_brim
detect_overhang_wall = 1
resolution = 0.012
elefant_foot_compensation = 0.15
percise_outer_wall = 1
percise_z_height = 0.2
enable_overhang_speed = 1
enable_prime_tower = 1
enable_support = 0
exclude_object = 0
filename_format = {input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode
gap_infill_speed = 250
infill_combination = 1
infill_direction = 45
infill_wall_overlap = 15
infill_anchor = 400%
infill_anchor_max = 20
initial_layer_line_width = 0.5
initial_layer_print_height = 0.25
initial_layer_speed = 60
initial_layer_infill_speed = 60
initial_layer_travel_speed = 500
slow_down_layers = 1
only_one_wall_top = 1
inner_wall_speed = 300
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 250
layer_height = 0.2
line_width = 0.42
minimum_sparse_infill_area = 15
outer_wall_line_width = 0.42
outer_wall_speed = 200
print_sequence = by layer
raft_layers = 0
reduce_crossing_wall = 0
reduce_infill_retraction = 1
seam_position = back
seam_gap = 10%
enable_arc_fitting = 0
staggered_inner_seams = 1
role_based_wipe_speed = 1
skirt_distance = 2.5
skirt_height = 1
skirt_speed = 50
skirt_start_angle = -45
sparse_infill_density = 15
sparse_infill_speed = 270
sparse_infill_pattern = grid
support_angle = 0
support_type = normal(auto)
support_base_pattern_spacing = 2.5
support_expansion = 0
support_interface_spacing = 0.5
support_interface_bottom_spacing = 0.5
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_base_pattern = rectilinear
support_interface_pattern = rectilinear
support_object_xy_distance = 0.35
support_on_build_plate_only = 1
support_bottom_interface_spacing = 0
support_speed = 150
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
top_surface_line_width = 0.42
top_surface_speed = 200
top_solid_infill_flow_ratio = 0.9
travel_speed = 500
support_threshold_angle = 15
wall_loops = 2
thick_bridges = 0
extra_perimeters_on_overhangs = 1
top_shell_layers = 5
top_shell_thickness = 1
slow_down_curled_perimeters = 0
default_jerk = 9
top_surface_jerk = 7
travel_jerk = 12
infill_jerk = 12
initial_layer_jerk = 9
inner_wall_jerk = 7
outer_wall_jerk = 7
default_acceleration = 13000
travel_acceleration = 13000
outer_wall_acceleration = 5000
inner_wall_acceleration = 5000
initial_layer_acceleration = 1000
top_surface_acceleration = 2000
raft_first_layer_density = 90
raft_first_layer_expansion = 2
precise_outer_wall = 1
precise_z_height = 0
slowdown_for_curled_perimeters = 0
bridge_speed = 50
internal_bridge_speed = 150%
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
independent_support_layer_height = 1

[print:process template @base]
inherits = fdm_process_common_klipper
from = User
instantiation = false
accel_to_decel_enable = 1
accel_to_decel_factor = 50%
alternate_extra_wall = 0
bottom_shell_layers = 3
bottom_shell_thickness = 0
bottom_solid_infill_flow_ratio = 1
bottom_surface_pattern = monotonic
bridge_acceleration = 50%
bridge_angle = 0
bridge_density = 100%
bridge_flow = 1
bridge_no_support = 0
bridge_speed = 50
brim_ears_detection_length = 1
brim_ears_max_angle = 125
brim_object_gap = 0.1
brim_type = outer_only
brim_width = 5
calib_flowrate_topinfill_special_order = 0
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
compatible_printers_condition = 
counterbore_hole_bridging = none
default_acceleration = 8000
default_jerk = 20
default_junction_deviation = 0
detect_narrow_internal_solid_infill = 1
detect_overhang_wall = 1
detect_thin_wall = 0
dont_filter_internal_bridges = disabled
draft_shield = disabled
elefant_foot_compensation = 0.15
elefant_foot_compensation_layers = 1
enable_arc_fitting = 1
enable_extra_bridge_layer = disabled
enable_overhang_speed = 1
enable_prime_tower = 1
enable_support = 0
enforce_support_layers = 0
ensure_vertical_shell_thickness = ensure_all
exclude_object = 0
extra_perimeters_on_overhangs = 0
extrusion_rate_smoothing_external_perimeter_only = 0
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
filter_out_gap_fill = 0
flush_into_infill = 0
flush_into_objects = 0
flush_into_support = 1
fuzzy_skin = none
fuzzy_skin_first_layer = 0
fuzzy_skin_noise_type = classic
fuzzy_skin_octaves = 4
fuzzy_skin_persistence = 0.5
fuzzy_skin_point_distance = 0.8
fuzzy_skin_scale = 1
fuzzy_skin_thickness = 0.3
gap_fill_target = nowhere
gap_infill_speed = 250
gcode_add_line_number = 0
gcode_comments = 0
gcode_label_objects = 1
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
independent_support_layer_height = 1
infill_anchor = 400%
infill_anchor_max = 20
infill_combination = 0
infill_combination_max_layer_height = 100%
infill_direction = 45
infill_jerk = 20
infill_wall_overlap = 15%
initial_layer_acceleration = 1000
initial_layer_infill_speed = 200
initial_layer_jerk = 20
initial_layer_line_width = 0.5
initial_layer_min_bead_width = 85%
initial_layer_print_height = 0.25
initial_layer_speed = 200
initial_layer_travel_speed = 100%
inner_wall_acceleration = 8000
inner_wall_jerk = 20
inner_wall_line_width = 0.45
inner_wall_speed = 400
interface_shells = 0
interlocking_beam = 0
interlocking_beam_layer_count = 2
interlocking_beam_width = 0.8
interlocking_boundary_avoidance = 2
interlocking_depth = 2
interlocking_orientation = 22.5
internal_bridge_angle = 0
internal_bridge_density = 100%
internal_bridge_flow = 1
internal_bridge_speed = 150%
internal_solid_infill_acceleration = 100%
internal_solid_infill_line_width = 0.42
internal_solid_infill_pattern = zig-zag
internal_solid_infill_speed = 250
ironing_angle = -1
ironing_flow = 10%
ironing_inset = 0
ironing_pattern = zig-zag
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
is_infill_first = 0
lattice_angle_1 = -45
lattice_angle_2 = 45
layer_height = 0.2
line_width = 0.42
make_overhang_printable = 0
make_overhang_printable_angle = 55
make_overhang_printable_hole_size = 0
max_bridge_length = 10
max_travel_detour_distance = 0
max_volumetric_extrusion_rate_slope = 0
max_volumetric_extrusion_rate_slope_segment_length = 3
min_bead_width = 85%
min_feature_size = 25%
min_length_factor = 0.5
min_skirt_length = 0
min_width_top_surface = 300%
minimum_sparse_infill_area = 15
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes = 
only_one_wall_first_layer = 0
only_one_wall_top = 1
ooze_prevention = 0
outer_wall_acceleration = 5000
outer_wall_jerk = 15
outer_wall_line_width = 0.42
outer_wall_speed = 300
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
overhang_reverse = 0
overhang_reverse_internal_only = 0
overhang_reverse_threshold = 50%
overhang_speed_classic = 0
post_process = 
precise_outer_wall = 0
precise_z_height = 0
preheat_steps = 1
preheat_time = 30
prime_tower_brim_width = 3
prime_tower_width = 35
prime_volume = 45
print_flow_ratio = 1
print_order = default
print_sequence = by layer
print_settings_id = process template @base
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 100%
raft_first_layer_expansion = 2
raft_layers = 0
reduce_crossing_wall = 1
reduce_infill_retraction = 1
resolution = 0.012
role_based_wipe_speed = 1
rotate_solid_infill_direction = 1
scarf_angle_threshold = 155
scarf_joint_flow_ratio = 1
scarf_joint_speed = 100%
scarf_overhang_threshold = 40%
seam_gap = 10%
seam_position = aligned
seam_slope_conditional = 0
seam_slope_entire_loop = 0
seam_slope_inner_walls = 0
seam_slope_min_length = 20
seam_slope_start_height = 0
seam_slope_steps = 10
seam_slope_type = none
single_extruder_multi_material_priming = 1
single_loop_draft_shield = 0
skirt_distance = 2
skirt_height = 1
skirt_loops = 0
skirt_speed = 50
skirt_start_angle = -135
skirt_type = combined
slice_closing_radius = 0.049
slicing_mode = regular
slow_down_layers = 0
slowdown_for_curled_perimeters = 0
small_area_infill_flow_compensation = 0
small_area_infill_flow_compensation_model = 0,0,
0.2,0.4444,
0.4,0.6145,
0.6,0.7059,
0.8,0.7619,
1.5,0.8571,
2,0.8889,
3,0.9231,
5,0.9520,
10,1
small_perimeter_speed = 50%
small_perimeter_threshold = 0
solid_infill_direction = 45
solid_infill_filament = 1
sparse_infill_acceleration = 100%
sparse_infill_density = 10%
sparse_infill_filament = 1
sparse_infill_line_width = 0.45
sparse_infill_pattern = grid
sparse_infill_speed = 270
spiral_finishing_flow_ratio = 0
spiral_mode = 0
spiral_mode_max_xy_smoothing = 200%
spiral_mode_smooth = 0
spiral_starting_flow_ratio = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_angle = 0
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_bottom_interface_spacing = 0.5
support_bottom_z_distance = 0.2
support_critical_regions_only = 0
support_expansion = 0
support_filament = 0
support_interface_bottom_layers = 2
support_interface_filament = 0
support_interface_loop_pattern = 0
support_interface_not_for_body = 1
support_interface_pattern = auto
support_interface_spacing = 0.5
support_interface_speed = 80
support_interface_top_layers = 2
support_line_width = 0.42
support_object_first_layer_gap = 0.2
support_object_xy_distance = 0.35
support_on_build_plate_only = 0
support_remove_small_overhang = 1
support_speed = 150
support_style = snug
support_threshold_angle = 30
support_threshold_overlap = 50%
support_top_z_distance = 0.2
support_type = normal(auto)
thick_bridges = 0
thick_internal_bridges = 1
timelapse_type = 0
top_bottom_infill_wall_overlap = 25%
top_shell_layers = 3
top_shell_thickness = 0.6
top_solid_infill_flow_ratio = 1
top_surface_acceleration = 2000
top_surface_jerk = 20
top_surface_line_width = 0.42
top_surface_pattern = monotonic
top_surface_speed = 200
travel_acceleration = 10000
travel_jerk = 20
travel_speed = 500
travel_speed_z = 0
tree_support_adaptive_layer_height = 1
tree_support_angle_slow = 25
tree_support_auto_brim = 1
tree_support_branch_angle = 45
tree_support_branch_angle_organic = 40
tree_support_branch_diameter = 2
tree_support_branch_diameter_angle = 5
tree_support_branch_diameter_organic = 2
tree_support_branch_distance = 5
tree_support_branch_distance_organic = 1
tree_support_brim_width = 3
tree_support_tip_diameter = 0.8
tree_support_top_rate = 30%
tree_support_wall_count = 0
wall_direction = auto
wall_distribution_count = 1
wall_filament = 1
wall_generator = classic
wall_loops = 2
wall_sequence = outer wall/inner wall
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_before_external_loop = 0
wipe_on_loops = 0
wipe_speed = 80%
wipe_tower_bridging = 10
wipe_tower_cone_angle = 0
wipe_tower_extra_flow = 100%
wipe_tower_extra_spacing = 100%
wipe_tower_filament = 0
wipe_tower_max_purge_speed = 90
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70
xy_contour_compensation = 0
xy_hole_compensation = 0

[print:cubicon default @Cubicon xCeler-I 0.4 nozzle]
inherits = cubicon common @base
instantiation = true
print_settings_id = cubicon default @Cubicon xCeler-I 0.4 nozzle
compatible_printers = Cubicon xCeler-I 0.4 nozzle

[print:cubicon default @Cubicon xCeler-Plus 0.4 nozzle]
inherits = cubicon common @base
instantiation = true
print_settings_id = cubicon default @Cubicon xCeler-Plus 0.4 nozzle
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle

[filament:fdm_filament_common]
from = system
instantiation = false
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
textured_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
textured_plate_temp_initial_layer = 60
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 60
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_z_hop_types = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
bed_type = Cool Plate
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 0
fan_max_speed = 100
fan_min_speed = 35
slow_down_min_speed = 10
slow_down_layer_time = 8
filament_start_gcode = ; Filament gcode

nozzle_temperature = 200
temperature_vitrification = 100

[filament:fdm_filament_abs]
inherits = fdm_filament_common
from = system
instantiation = false
activate_air_filtration = 0
supertack_plate_temp = 0
supertack_plate_temp_initial_layer = 0
cool_plate_temp = 0
cool_plate_temp_initial_layer = 0
eng_plate_temp = 100
eng_plate_temp_initial_layer = 105
fan_cooling_layer_time = 30
fan_max_speed = 80
fan_min_speed = 10
filament_cost = 20
filament_density = 1.04
filament_max_volumetric_speed = 12
filament_type = ABS
hot_plate_temp = 100
hot_plate_temp_initial_layer = 105
nozzle_temperature = 260
nozzle_temperature_initial_layer = 260
nozzle_temperature_range_high = 280
nozzle_temperature_range_low = 240
overhang_fan_speed = 80
overhang_fan_threshold = 25%
reduce_fan_stop_start_freq = 1
slow_down_layer_time = 3
slow_down_min_speed = 10
textured_plate_temp = 100
textured_plate_temp_initial_layer = 105
filament_flow_ratio = 0.926
temperature_vitrification = 110

[filament:fdm_filament_pa]
inherits = fdm_filament_common
from = system
filament_id = OGFN99
instantiation = false
activate_air_filtration = 0
supertack_plate_temp = 0
supertack_plate_temp_initial_layer = 0
cool_plate_temp = 0
cool_plate_temp_initial_layer = 0
eng_plate_temp = 100
eng_plate_temp_initial_layer = 100
fan_cooling_layer_time = 4
fan_max_speed = 60
fan_min_speed = 0
filament_cost = 20
filament_density = 1.04
filament_max_volumetric_speed = 8
filament_type = PA
hot_plate_temp = 100
hot_plate_temp_initial_layer = 100
nozzle_temperature = 280
nozzle_temperature_initial_layer = 280
nozzle_temperature_range_high = 300
nozzle_temperature_range_low = 260
overhang_fan_speed = 30
required_nozzle_HRC = 40
slow_down_layer_time = 2
slow_down_min_speed = 10
temperature_vitrification = 108
textured_plate_temp = 100
textured_plate_temp_initial_layer = 100

[filament:fdm_filament_pc]
inherits = fdm_filament_common
from = system
filament_id = OGFC99
instantiation = false
supertack_plate_temp = 0
supertack_plate_temp_initial_layer = 0
cool_plate_temp = 0
cool_plate_temp_initial_layer = 0
eng_plate_temp = 110
eng_plate_temp_initial_layer = 110
fan_cooling_layer_time = 30
fan_max_speed = 60
fan_min_speed = 10
filament_cost = 20
filament_density = 1.04
filament_type = PC
hot_plate_temp = 110
hot_plate_temp_initial_layer = 110
nozzle_temperature = 280
nozzle_temperature_initial_layer = 270
nozzle_temperature_range_high = 290
nozzle_temperature_range_low = 260
overhang_fan_speed = 60
overhang_fan_threshold = 25%
reduce_fan_stop_start_freq = 1
slow_down_layer_time = 2
slow_down_min_speed = 10
temperature_vitrification = 120
textured_plate_temp = 110
textured_plate_temp_initial_layer = 110
filament_max_volumetric_speed = 12
filament_flow_ratio = 0.94

[filament:fdm_filament_pet]
inherits = fdm_filament_common
from = system
filament_id = OGFG99
instantiation = false
eng_plate_temp = 0
eng_plate_temp_initial_layer = 0
fan_cooling_layer_time = 20
fan_min_speed = 20
filament_cost = 30
filament_density = 1.27
filament_max_volumetric_speed = 12
filament_type = PETG
hot_plate_temp = 80
hot_plate_temp_initial_layer = 80
nozzle_temperature = 255
nozzle_temperature_initial_layer = 255
nozzle_temperature_range_high = 260
nozzle_temperature_range_low = 220
reduce_fan_stop_start_freq = 1
supertack_plate_temp = 70
supertack_plate_temp_initial_layer = 70
temperature_vitrification = 70
textured_plate_temp = 80
textured_plate_temp_initial_layer = 80

[filament:fdm_filament_pla]
inherits = fdm_filament_common
from = system
instantiation = false
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 12
filament_type = PLA
filament_density = 1.24
filament_cost = 20
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
textured_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
textured_plate_temp_initial_layer = 60
nozzle_temperature_initial_layer = 220
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
overhang_fan_threshold = 50%
close_fan_the_first_x_layers = 1
nozzle_temperature = 220
temperature_vitrification = 60
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 230
slow_down_min_speed = 10
slow_down_layer_time = 4
additional_cooling_fan_speed = 70
filament_start_gcode = ; filament start gcode

[filament:Cubicon ABS @base]
inherits = fdm_filament_abs
filament_id = P510cfb0
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon ABS @base
filament_vendor = Cubicon
filament_type = ABS
hot_plate_temp = 115
hot_plate_temp_initial_layer = 115
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
filament_density = 1.24
filament_flow_ratio = 0.99
filament_max_volumetric_speed = 23
nozzle_temperature_initial_layer = 240
fan_max_speed = 80
fan_min_speed = 70
slow_down_min_speed = 30
slow_down_layer_time = 3
nozzle_temperature = 245
temperature_vitrification = 78
nozzle_temperature_range_low = 220
nozzle_temperature_range_high = 260
additional_cooling_fan_speed = 0

[filament:Cubicon PA-CF @base]
inherits = fdm_filament_pa
filament_id = P510cfd0
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon PA-CF @base
filament_type = PA
filament_vendor = Cubicon
hot_plate_temp = 100
hot_plate_temp_initial_layer = 100
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 5
filament_density = 1.24
filament_flow_ratio = 0.99
filament_max_volumetric_speed = 10
nozzle_temperature_initial_layer = 265
fan_max_speed = 50
fan_min_speed = 50
slow_down_min_speed = 20
slow_down_layer_time = 2
nozzle_temperature = 270
temperature_vitrification = 108
nozzle_temperature_range_low = 260
nozzle_temperature_range_high = 280
additional_cooling_fan_speed = 0

[filament:Cubicon PC @base]
inherits = fdm_filament_pc
filament_id = P510cfd0
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon PC @base
filament_type = PC
filament_vendor = Cubicon

[filament:Cubicon PETG @base]
inherits = fdm_filament_pet
filament_id = P510cfc0
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon PETG @base
filament_type = PETG
filament_vendor = Cubicon
hot_plate_temp = 80
hot_plate_temp_initial_layer = 80
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
filament_density = 1.24
filament_flow_ratio = 0.99
filament_max_volumetric_speed = 8
nozzle_temperature_initial_layer = 235
fan_max_speed = 90
fan_min_speed = 80
slow_down_min_speed = 30
slow_down_layer_time = 8
nozzle_temperature = 240
temperature_vitrification = 70
nozzle_temperature_range_low = 230
nozzle_temperature_range_high = 250
additional_cooling_fan_speed = 0

[filament:Cubicon PLA @base]
inherits = fdm_filament_pla
from = system
filament_id = P510cfa0
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = CBC_MTC_0
filament_type = PLA
filament_vendor = Cubicon
filament_flow_ratio = 0.99
filament_max_volumetric_speed = 23
slow_down_layer_time = 3
slow_down_min_speed = 50
temperature_vitrification = 60
hot_plate_temp = 60
hot_plate_temp_initial_layer = 60
nozzle_temperature = 210
nozzle_temperature_initial_layer = 205
fan_max_speed = 80
fan_min_speed = 100
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 230
additional_cooling_fan_speed = 80

[filament:Cubicon ABS @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon ABS @base
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle
filament_settings_id = Cubicon ABS @Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon ABS @base
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle
filament_settings_id = Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon ABS-A100 @base]
inherits = Cubicon ABS @base
filament_id = P510cfb1
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon ABS-A100 @base
filament_type = ABS
filament_vendor = Cubicon
hot_plate_temp = 100
hot_plate_temp_initial_layer = 100
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
filament_density = 1.24
filament_flow_ratio = 0.99
filament_max_volumetric_speed = 23
nozzle_temperature_initial_layer = 225
fan_max_speed = 80
fan_min_speed = 70
slow_down_min_speed = 30
slow_down_layer_time = 3
nozzle_temperature = 230
temperature_vitrification = 78
nozzle_temperature_range_low = 220
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

[filament:Cubicon ABSk @base]
inherits = Cubicon ABS @base
filament_id = P510cfb2
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon ABSk @base
filament_type = ABS
filament_vendor = Cubicon
hot_plate_temp = 115
hot_plate_temp_initial_layer = 115
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
filament_density = 1.24
filament_flow_ratio = 0.99
filament_max_volumetric_speed = 23
nozzle_temperature_initial_layer = 240
fan_max_speed = 80
fan_min_speed = 70
slow_down_min_speed = 30
slow_down_layer_time = 3
nozzle_temperature = 240
temperature_vitrification = 85
nozzle_temperature_range_low = 220
nozzle_temperature_range_high = 240
additional_cooling_fan_speed = 0

[filament:Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon PA-CF @base
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle
filament_settings_id = Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon PA-CF @base
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle
filament_settings_id = Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon PC @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon PC @base
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle
filament_settings_id = Cubicon PC @Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon PC @base
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle
filament_settings_id = Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon PETG @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon PETG @base
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle
filament_settings_id = Cubicon PETG @Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon PETG @base
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle
filament_settings_id = Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon PLA @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon PLA @base
from = system
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon PLA @base
from = system
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon PLA+ @base]
inherits = Cubicon PLA @base
filament_id = P510cfa1
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon PLA+ @base
filament_type = PLA
filament_vendor = Cubicon
temperature_vitrification = 52
nozzle_temperature_range_high = 220

[filament:Cubicon PLAi21 @base]
inherits = Cubicon PLA @base
filament_id = P510cfa2
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle,Cubicon xCeler-Plus 0.4 nozzle
default_filament_colour = 
filament_settings_id = Cubicon PLAi21 @base
filament_type = PLA
filament_vendor = Cubicon
temperature_vitrification = 45

[filament:Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon ABS-A100 @base
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle
filament_settings_id = Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon ABS-A100 @base
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle
filament_settings_id = Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon ABSk @base
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle
filament_settings_id = Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon ABSk @base
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle
filament_settings_id = Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon PLA+ @base
from = system
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon PLA+ @base
from = system
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle

[filament:Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle]
inherits = Cubicon PLAi21 @base
from = system
instantiation = true
compatible_printers = Cubicon xCeler-I 0.4 nozzle

[filament:Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle]
inherits = Cubicon PLAi21 @base
from = system
instantiation = true
compatible_printers = Cubicon xCeler-Plus 0.4 nozzle