[vendor]
repo_id = orcaslicer-fff
name = Raise3D
config_version = 02.03.02.60
description = Raise3D configurations
force_update = 0

[printer_model:Raise3D Pro3]
model_id = Raise3D-Pro3
nozzle_diameter = 0.4
machine_tech = FFF
family = Raise3D
bed_model = raise3d_pro3_buildplate_model.stl
bed_texture = raise3d_pro3_buildplate_texture.png
hotend_model = 
default_materials = Generic ASA @System;Generic PETG @System;Generic PLA @System;Generic PVA @System;Generic TPU @System

[printer_model:Raise3D Pro3 Plus]
model_id = Raise3D-Pro3-Plus
nozzle_diameter = 0.4
machine_tech = FFF
family = Raise3D
bed_model = raise3d_pro3plus_buildplate_model.stl
bed_texture = raise3d_pro3plus_buildplate_texture.png
hotend_model = 
default_materials = Generic ASA @System;Generic PETG @System;Generic PLA @System;Generic PVA @System;Generic TPU @System

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
z_lift_type = NormalLift
default_print_profile = 
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_start_gcode = 
machine_end_gcode =

[printer:Raise3D Pro3 0.4 nozzle (Dual)]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Raise3D Pro3
default_print_profile = 0.20mm Standard @Raise3D Pro3
nozzle_diameter = 0.4,0.4
extruder_colour = #FCE94F,#FCE94F
extruder_offset = 0x0,0x0
printable_area = 0x0,340x0,340x300,0x300
printable_height = 300
nozzle_type = hardened_steel
auxiliary_fan = 0
machine_max_acceleration_e = 3000,3000
machine_max_acceleration_extruding = 1000,300
machine_max_acceleration_retracting = 3000,1500
machine_max_acceleration_travel = 1500,500
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
machine_max_acceleration_z = 100,100
machine_max_speed_e = 120,120
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 5,5
machine_max_jerk_x = 5,5
machine_max_jerk_y = 5,5
machine_max_jerk_z = 0.4,0.4
max_layer_height = 0.4,0.4
min_layer_height = 0.1,0.1
printer_settings_id = Raise3D
retraction_minimum_travel = 0.6,0.6
retract_before_wipe = 0%,0%
retraction_length = 0.5,0.5
retract_length_toolchange = 2,2
retract_when_changing_layer = 1,1
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retraction_speed = 40,40
deretraction_speed = 0,0
wipe = 1,1
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = ; pause print
M2000
default_filament_profile = Generic PLA @System
machine_start_gcode = ;Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}

M104 T0 S{nozzle_temperature_initial_layer[0] - 30} ; raise extruder one temp
M104 T1 S{nozzle_temperature_initial_layer[1] - 30} ; raise extruder two temp
M190 S{max(bed_temperature_initial_layer_single, bed_temperature_initial_layer_single)} ; wait for bed temp
M109 T1 S{nozzle_temperature_initial_layer[1]} ; wait for extruder two temp
T1
G21
G90
M82
M107
M106 P2 S0
G1 Z0.3 F500
G92 E0
G1 Z0.3 F400
G1 X60 Y{random(2,8)} F1000
G1 X110 Y{random(2,8)} E30 F200
G1 Z0.3 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 X170 F2000 ; move away from purge line
M104 T1 S{nozzle_temperature_initial_layer[1] - 30} ; lower extruder two temp
M109 T0 S{nozzle_temperature_initial_layer[0]} ; wait for extruder one temp
T0
G1 Z0.3 F400
G1 X220 Y{random(2,8)} F1000
G1 X270 Y{random(2,8)} E18 F200
G1 Z5 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 Y30 F2000 ; move away from purge line
M104 T0 S{nozzle_temperature_initial_layer[1] - 30} ; lower extruder one temp
G92 E0
G1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print
M117 Printing...
machine_end_gcode = M221 T0 S100
M104 S0
M140 S0
M107
M106 P2 S0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000.00
G28 X0 Y0
M84
G90
toolchange_gcode = ; layer [layer_num] tool change
{if layer_z < initial_layer_print_height + layer_height * 2}
M104 T[current_extruder] S{nozzle_temperature_initial_layer[current_extruder] - 30}
M109 T[next_extruder] S{nozzle_temperature_initial_layer[next_extruder]}
{else}
M104 T[current_extruder] S{nozzle_temperature[current_extruder] - 30}
M109 T[next_extruder] S{nozzle_temperature[next_extruder]}
{endif}
before_layer_change_gcode = ; before layer [layer_num] change
G92 E0
{if layer_z <= initial_layer_print_height + layer_height * 2}
M140 S{max(bed_temperature_initial_layer_single, bed_temperature_initial_layer_single)}
{else}
M140 S{max(bed_temperature[0], bed_temperature[1])}
{endif}
{if (filament_type[0] =="PLA" or filament_type[0] =="PETG")}
{if layer_z >= initial_layer_print_height + layer_height * 2}
M106 P2 S150
{elsif layer_z >= initial_layer_print_height + layer_height * 1}
M106 P2 S100
{else}
M106 P2 S0
{endif}
{endif}
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0

[printer:Raise3D Pro3 0.4 nozzle (Left)]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Raise3D Pro3
default_print_profile = 0.20mm Standard @Raise3D Pro3
nozzle_diameter = 0.4,0.4
extruder_colour = #FCE94F,#FCE94F
extruder_offset = 0x0,0x0
printable_area = 0x0,340x0,340x300,0x300
printable_height = 300
nozzle_type = hardened_steel
auxiliary_fan = 0
machine_max_acceleration_e = 3000,3000
machine_max_acceleration_extruding = 1000,300
machine_max_acceleration_retracting = 3000,1500
machine_max_acceleration_travel = 1500,500
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
machine_max_acceleration_z = 100,100
machine_max_speed_e = 120,120
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 5,5
machine_max_jerk_x = 5,5
machine_max_jerk_y = 5,5
machine_max_jerk_z = 0.4,0.4
max_layer_height = 0.4,0.4
min_layer_height = 0.1,0.1
printer_settings_id = Raise3D
retraction_minimum_travel = 0.6,0.6
retract_before_wipe = 0%,0%
retraction_length = 0.5,0.5
retract_length_toolchange = 2,2
retract_when_changing_layer = 1,1
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retraction_speed = 40,40
deretraction_speed = 0,0
wipe = 1,1
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = ; pause print
M2000
default_filament_profile = Generic PLA @System
machine_start_gcode = ;Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}

M104 T0 S{nozzle_temperature_initial_layer[0] - 20} ; raise left extruder temp
M140 S[bed_temperature_initial_layer_single] ; raise bed temp
M190 S[bed_temperature_initial_layer_single] ; wait for bed temp
M109 T0 S{nozzle_temperature_initial_layer[0] - 20} ; wait for left extruder temp
M104 T0 S[nozzle_temperature_initial_layer] ; set left extruder temp
M109 T0 S[nozzle_temperature_initial_layer] ; wait for left extruder temp
T0
G21
G90
M82
M107
M106 P2 S0
G1 Z0.3 F500
G92 E0
G1 Z0.3 F400
G1 X100 Y{random(2,8)} F1000
G1 X170 Y{random(2,8)} E15 F200
G1 Z5 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 Y30 F2000 ; move away from purge line
G1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print
M117 Printing...
M1001
machine_end_gcode = M1002
M221 T0 S100
M104 S0
M140 S0
M107
M106 P2 S0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000.00
G28 X0 Y0
M84
G90

toolchange_gcode = ; layer [layer_num] tool change
before_layer_change_gcode = ; before layer [layer_num] change
G92 E0
{if layer_z <= initial_layer_print_height + layer_height * 2}
M109 T0 S{nozzle_temperature_initial_layer[0]}
M140 S[bed_temperature_initial_layer_single]
{else}
M109 T0 S{nozzle_temperature[0]}
M140 S{bed_temperature[0]}
{endif}
{if (filament_type[0] =="PLA" or filament_type[0] =="PETG")}
{if layer_z >= initial_layer_print_height + layer_height * 2}
M106 P2 S150
{elsif layer_z >= initial_layer_print_height + layer_height * 1}
M106 P2 S100
{else}
M106 P2 S0
{endif}
{endif}
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0

[printer:Raise3D Pro3 0.4 nozzle (Right)]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Raise3D Pro3
default_print_profile = 0.20mm Standard @Raise3D Pro3
nozzle_diameter = 0.4,0.4
extruder_colour = #FCE94F,#FCE94F
extruder_offset = 0x0,0x0
printable_area = 0x0,340x0,340x300,0x300
printable_height = 300
nozzle_type = hardened_steel
auxiliary_fan = 0
machine_max_acceleration_e = 3000,3000
machine_max_acceleration_extruding = 1000,300
machine_max_acceleration_retracting = 3000,1500
machine_max_acceleration_travel = 1500,500
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
machine_max_acceleration_z = 100,100
machine_max_speed_e = 120,120
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 5,5
machine_max_jerk_x = 5,5
machine_max_jerk_y = 5,5
machine_max_jerk_z = 0.4,0.4
max_layer_height = 0.4,0.4
min_layer_height = 0.1,0.1
printer_settings_id = Raise3D
retraction_minimum_travel = 0.6,0.6
retract_before_wipe = 0%,0%
retraction_length = 0.5,0.5
retract_length_toolchange = 2,2
retract_when_changing_layer = 1,1
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retraction_speed = 40,40
deretraction_speed = 0,0
wipe = 1,1
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = ; pause print
M2000
default_filament_profile = Generic PLA @System
machine_start_gcode = ;Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}

M104 T1 S{nozzle_temperature_initial_layer[1] - 20} ; raise right extruder temp
M140 S[bed_temperature_initial_layer_single] ; raise bed temp
M190 S[bed_temperature_initial_layer_single] ; wait for bed temp
M109 T1 S{nozzle_temperature_initial_layer[1] - 20} ; wait for right extruder temp
M104 T1 S{nozzle_temperature_initial_layer[1]} ; set right extruder temp
M109 T1 S{nozzle_temperature_initial_layer[1]} ; wait for right extruder temp
T1
G21
G90
M82
M107
M106 P2 S0
G1 Z0.3 F500
G92 E0
G1 Z0.3 F400
G1 X100 Y{random(2,8)} F1000
G1 X170 Y{random(2,8)} E15 F200
G1 Z5 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 Y30 F2000 ; move away from purge line
G1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print
M117 Printing...
M1001
machine_end_gcode = M1002
M221 T0 S100
M104 S0
M140 S0
M107
M106 P2 S0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000.00
G28 X0 Y0
M84
G90
M106 P2 S0

toolchange_gcode = ; layer [layer_num] tool change
before_layer_change_gcode = ; before layer [layer_num] change
G92 E0
{if layer_z <= initial_layer_print_height + layer_height * 2}
M109 T1 S{nozzle_temperature_initial_layer[1]}
M140 S[bed_temperature_initial_layer_single]
{else}
M109 T1 S{nozzle_temperature[1]}
M140 S{bed_temperature[1]}
{endif}
{if (filament_type[0] =="PLA" or filament_type[0] =="PETG")}
{if layer_z >= initial_layer_print_height + layer_height * 2}
M106 P2 S150
{elsif layer_z >= initial_layer_print_height + layer_height * 1}
M106 P2 S100
{else}
M106 P2 S0
{endif}
{endif}
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0

[printer:Raise3D Pro3 Plus 0.4 nozzle (Dual)]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Raise3D Pro3 Plus
default_print_profile = 0.20mm Standard @Raise3D Pro3Plus
nozzle_diameter = 0.4,0.4
extruder_colour = #FCE94F,#FCE94F
extruder_offset = 0x0,0x0
printable_area = 0x0,340x0,340x300,0x300
printable_height = 605
nozzle_type = hardened_steel
auxiliary_fan = 0
machine_max_acceleration_e = 3000,3000
machine_max_acceleration_extruding = 1000,300
machine_max_acceleration_retracting = 3000,1500
machine_max_acceleration_travel = 1500,500
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
machine_max_acceleration_z = 100,100
machine_max_speed_e = 120,120
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 5,5
machine_max_jerk_x = 5,5
machine_max_jerk_y = 5,5
machine_max_jerk_z = 0.4,0.4
max_layer_height = 0.4,0.4
min_layer_height = 0.1,0.1
printer_settings_id = Raise3D
retraction_minimum_travel = 0.6,0.6
retract_before_wipe = 0%,0%
retraction_length = 0.5,0.5
retract_length_toolchange = 2,2
retract_when_changing_layer = 1,1
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retraction_speed = 40,40
deretraction_speed = 0,0
wipe = 1,1
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = ; pause print
M2000
default_filament_profile = Generic PLA @System
machine_start_gcode = ;Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}

M104 T0 S{nozzle_temperature_initial_layer[0] - 30} ; raise extruder one temp
M104 T1 S{nozzle_temperature_initial_layer[1] - 30} ; raise extruder two temp
M190 S{max(bed_temperature_initial_layer_single, bed_temperature_initial_layer_single)} ; wait for bed temp
M109 T1 S{nozzle_temperature_initial_layer[1]} ; wait for extruder two temp
T1
G21
G90
M82
M107
M106 P2 S0
G1 Z0.3 F500
G92 E0
G1 Z0.3 F400
G1 X60 Y{random(2,8)} F1000
G1 X110 Y{random(2,8)} E30 F200
G1 Z0.3 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 X170 F2000 ; move away from purge line
M104 T1 S{nozzle_temperature_initial_layer[1] - 30} ; lower extruder two temp
M109 T0 S{nozzle_temperature_initial_layer[0]} ; wait for extruder one temp
T0
G1 Z0.3 F400
G1 X220 Y{random(2,8)} F1000
G1 X270 Y{random(2,8)} E18 F200
G1 Z5 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 Y30 F2000 ; move away from purge line
M104 T0 S{nozzle_temperature_initial_layer[1] - 30} ; lower extruder one temp
G92 E0
G1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print
M117 Printing...
machine_end_gcode = M221 T0 S100
M104 S0
M140 S0
M107
M106 P2 S0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000.00
G28 X0 Y0
M84
G90
toolchange_gcode = ; layer [layer_num] tool change
{if layer_z < initial_layer_print_height + layer_height * 2}
M104 T[current_extruder] S{nozzle_temperature_initial_layer[current_extruder] - 30}
M109 T[next_extruder] S{nozzle_temperature_initial_layer[next_extruder]}
{else}
M104 T[current_extruder] S{nozzle_temperature[current_extruder] - 30}
M109 T[next_extruder] S{nozzle_temperature[next_extruder]}
{endif}
before_layer_change_gcode = ; before layer [layer_num] change
{if layer_z <= initial_layer_print_height + layer_height * 2}
M140 S{max(bed_temperature_initial_layer_single, bed_temperature_initial_layer_single)}
{else}
M140 S{max(bed_temperature[0], bed_temperature[1])}
{endif}
{if (filament_type[0] =="PLA" or filament_type[0] =="PETG")}
{if layer_z >= initial_layer_print_height + layer_height * 2}
M106 P2 S150
{elsif layer_z >= initial_layer_print_height + layer_height * 1}
M106 P2 S100
{else}
M106 P2 S0
{endif}
{endif}
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0

[printer:Raise3D Pro3 Plus 0.4 nozzle (Left)]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Raise3D Pro3 Plus
default_print_profile = 0.20mm Standard @Raise3D Pro3Plus
nozzle_diameter = 0.4,0.4
extruder_colour = #FCE94F,#FCE94F
extruder_offset = 0x0,0x0
printable_area = 0x0,340x0,340x300,0x300
printable_height = 605
nozzle_type = hardened_steel
auxiliary_fan = 0
machine_max_acceleration_e = 3000,3000
machine_max_acceleration_extruding = 1000,300
machine_max_acceleration_retracting = 3000,1500
machine_max_acceleration_travel = 1500,500
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
machine_max_acceleration_z = 100,100
machine_max_speed_e = 120,120
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 5,5
machine_max_jerk_x = 5,5
machine_max_jerk_y = 5,5
machine_max_jerk_z = 0.4,0.4
max_layer_height = 0.4,0.4
min_layer_height = 0.1,0.1
printer_settings_id = Raise3D
retraction_minimum_travel = 0.6,0.6
retract_before_wipe = 0%,0%
retraction_length = 0.5,0.5
retract_length_toolchange = 2,2
retract_when_changing_layer = 1,1
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retraction_speed = 40,40
deretraction_speed = 0,0
wipe = 1,1
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = ; pause print
M2000
default_filament_profile = Generic PLA @System
machine_start_gcode = ;Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}

M104 T0 S{nozzle_temperature_initial_layer[0] - 20} ; raise left extruder temp
M140 S[bed_temperature_initial_layer_single] ; raise bed temp
M190 S{bed_temperature_initial_layer_single} ; wait for bed temp
M109 T0 S{nozzle_temperature_initial_layer[0] - 20} ; wait for left extruder temp
M104 T0 S[nozzle_temperature_initial_layer] ; set left extruder temp
M109 T0 S[nozzle_temperature_initial_layer] ; wait for left extruder temp
T0
G21
G90
M82
M107
M106 P2 S0
G1 Z0.3 F500
G92 E0
G1 Z0.3 F400
G1 X100 Y{random(2,8)} F1000
G1 X170 Y{random(2,8)} E15 F200
G1 Z5 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 Y30 F2000 ; move away from purge line
G1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print
M117 Printing...
M1001
machine_end_gcode = M1002
M221 T0 S100
M104 S0
M140 S0
M107
M106 P2 S0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000.00
G28 X0 Y0
M84
G90

toolchange_gcode = ; layer [layer_num] tool change
before_layer_change_gcode = ; before layer [layer_num] change
{if layer_z <= initial_layer_print_height + layer_height * 2}
M109 T0 S{nozzle_temperature_initial_layer[0]}
M140 S[bed_temperature_initial_layer_single]
{else}
M109 T0 S{nozzle_temperature[0]}
M140 S{bed_temperature[0]}
{endif}
{if (filament_type[0] =="PLA" or filament_type[0] =="PETG")}
{if layer_z >= initial_layer_print_height + layer_height * 2}
M106 P2 S150
{elsif layer_z >= initial_layer_print_height + layer_height * 1}
M106 P2 S100
{else}
M106 P2 S0
{endif}
{endif}
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0

[printer:Raise3D Pro3 Plus 0.4 nozzle (Right)]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Raise3D Pro3 Plus
default_print_profile = 0.20mm Standard @Raise3D Pro3Plus
nozzle_diameter = 0.4,0.4
extruder_colour = #FCE94F,#FCE94F
extruder_offset = 0x0,0x0
printable_area = 0x0,340x0,340x300,0x300
printable_height = 605
nozzle_type = hardened_steel
auxiliary_fan = 0
machine_max_acceleration_e = 3000,3000
machine_max_acceleration_extruding = 1000,300
machine_max_acceleration_retracting = 3000,1500
machine_max_acceleration_travel = 1500,500
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
machine_max_acceleration_z = 100,100
machine_max_speed_e = 120,120
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 5,5
machine_max_jerk_x = 5,5
machine_max_jerk_y = 5,5
machine_max_jerk_z = 0.4,0.4
max_layer_height = 0.4,0.4
min_layer_height = 0.1,0.1
printer_settings_id = Raise3D
retraction_minimum_travel = 0.6,0.6
retract_before_wipe = 0%,0%
retraction_length = 0.5,0.5
retract_length_toolchange = 2,2
retract_when_changing_layer = 1,1
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retraction_speed = 40,40
deretraction_speed = 0,0
wipe = 1,1
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = ; pause print
M2000
default_filament_profile = Generic PLA @System
machine_start_gcode = ;Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}

M104 T1 S{nozzle_temperature_initial_layer[1] - 20} ; raise right extruder temp
M140 S[bed_temperature_initial_layer_single] ; raise bed temp
M190 S[bed_temperature_initial_layer_single] ; wait for bed temp
M109 T1 S{nozzle_temperature_initial_layer[1] - 20} ; wait for right extruder temp
M104 T1 S{nozzle_temperature_initial_layer[1]} ; set right extruder temp
M109 T1 S{nozzle_temperature_initial_layer[1]} ; wait for right extruder temp
T1
G21
G90
M82
M107
M106 P2 S0
G1 Z0.3 F500
G92 E0
G1 Z0.3 F400
G1 X100 Y{random(2,8)} F1000
G1 X170 Y{random(2,8)} E15 F200
G1 Z5 E15 F200
G92 E0
G1 Z10 F2000 ; move up from purge line
G1 Y30 F2000 ; move away from purge line
G1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print
M117 Printing...
M1001
machine_end_gcode = M1002
M221 T0 S100
M104 S0
M140 S0
M107
M106 P2 S0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000.00
G28 X0 Y0
M84
G90
M106 P2 S0

toolchange_gcode = ; layer [layer_num] tool change
before_layer_change_gcode = ; before layer [layer_num] change
{if layer_z <= initial_layer_print_height + layer_height * 2}
M109 T1 S{nozzle_temperature_initial_layer[1]}
M140 S[bed_temperature_initial_layer_single]
{else}
M109 T1 S{nozzle_temperature[1]}
M140 S{bed_temperature[1]}
{endif}
{if (filament_type[0] =="PLA" or filament_type[0] =="PETG")}
{if layer_z >= initial_layer_print_height + layer_height * 2}
M106 P2 S150
{elsif layer_z >= initial_layer_print_height + layer_height * 1}
M106 P2 S100
{else}
M106 P2 S0
{endif}
{endif}
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
scan_first_layer = 0

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
compatible_printers = 
print_sequence = by layer
default_acceleration = 0
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.4
outer_wall_speed = 25
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.4
initial_layer_print_height = 0.2
initial_layer_speed = 15
gap_infill_speed = 25
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
sparse_infill_speed = 70
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 3
inner_wall_line_width = 0.4
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 60
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
support_filament = 0
support_line_width = 0.38
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 30
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.4
top_surface_speed = 35
travel_speed = 150
enable_prime_tower = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0

[print:0.10mm Fine @Raise3D Pro3]
inherits = fdm_process_common
from = system
setting_id = GP004
instantiation = true
adaptive_layer_height = 1
reduce_crossing_wall = 0
layer_height = 0.1
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 6
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
brim_object_gap = 0
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 0
top_surface_acceleration = 0
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 0
travel_acceleration = 0
inner_wall_acceleration = 0
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 5%
ironing_spacing = 0.1
ironing_speed = 10
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 3
skirt_height = 1
skirt_loops = 2
minimum_sparse_infill_area = 10
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = grid
support_on_build_plate_only = 0
support_top_z_distance = 0.08
support_filament = 0
support_line_width = 0.38
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = -1
support_interface_spacing = 0.1
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 0.1
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 60%
tree_support_branch_angle = 40
tree_support_wall_count = 0
detect_thin_wall = 1
top_surface_pattern = monotonicline
top_surface_line_width = 0.38
top_shell_layers = 5
top_shell_thickness = 0.8
initial_layer_speed = 35%
initial_layer_infill_speed = 35%
outer_wall_speed = 15
inner_wall_speed = 20
internal_solid_infill_speed = 70
top_surface_speed = 35
gap_infill_speed = 25
sparse_infill_speed = 60
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 40
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers = Raise3D Pro3 0.4 nozzle (Dual),Raise3D Pro3 0.4 nozzle (Left),Raise3D Pro3 0.4 nozzle (Right)

[print:0.10mm Fine @Raise3D Pro3Plus]
inherits = fdm_process_common
from = system
setting_id = GP004
instantiation = true
adaptive_layer_height = 1
reduce_crossing_wall = 0
layer_height = 0.1
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 6
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
brim_object_gap = 0
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 0
top_surface_acceleration = 0
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 0
travel_acceleration = 0
inner_wall_acceleration = 0
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 5%
ironing_spacing = 0.1
ironing_speed = 10
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 3
skirt_height = 1
skirt_loops = 2
minimum_sparse_infill_area = 10
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = grid
support_on_build_plate_only = 0
support_top_z_distance = 0.08
support_filament = 0
support_line_width = 0.38
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = -1
support_interface_spacing = 0.1
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 0.1
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 60%
tree_support_branch_angle = 40
tree_support_wall_count = 0
detect_thin_wall = 1
top_surface_pattern = monotonicline
top_surface_line_width = 0.38
top_shell_layers = 5
top_shell_thickness = 0.8
initial_layer_speed = 35%
initial_layer_infill_speed = 35%
outer_wall_speed = 15
inner_wall_speed = 20
internal_solid_infill_speed = 70
top_surface_speed = 35
gap_infill_speed = 25
sparse_infill_speed = 60
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 40
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers = Raise3D Pro3 Plus 0.4 nozzle (Dual),Raise3D Pro3 Plus 0.4 nozzle (Left),Raise3D Pro3 Plus 0.4 nozzle (Right)

[print:0.20mm Standard @Raise3D Pro3]
inherits = fdm_process_common
from = system
setting_id = GP004
instantiation = true
adaptive_layer_height = 1
reduce_crossing_wall = 0
layer_height = 0.2
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 5
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
brim_object_gap = 0
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 0
top_surface_acceleration = 0
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 0
travel_acceleration = 0
inner_wall_acceleration = 0
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 5%
ironing_spacing = 0.1
ironing_speed = 10
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 3
skirt_height = 1
skirt_loops = 2
minimum_sparse_infill_area = 10
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = grid
support_on_build_plate_only = 0
support_top_z_distance = 0.19
support_filament = 0
support_line_width = 0.38
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = -1
support_interface_spacing = 0.2
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 0.2
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 60%
tree_support_branch_angle = 40
tree_support_wall_count = 0
detect_thin_wall = 1
top_surface_pattern = monotonicline
top_surface_line_width = 0.38
top_shell_layers = 5
top_shell_thickness = 0.8
initial_layer_speed = 35%
initial_layer_infill_speed = 35%
outer_wall_speed = 25
inner_wall_speed = 30
internal_solid_infill_speed = 70
top_surface_speed = 35
gap_infill_speed = 25
sparse_infill_speed = 60
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 40
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers = Raise3D Pro3 0.4 nozzle (Dual),Raise3D Pro3 0.4 nozzle (Left),Raise3D Pro3 0.4 nozzle (Right)

[print:0.20mm Standard @Raise3D Pro3Plus]
inherits = fdm_process_common
from = system
setting_id = GP004
instantiation = true
adaptive_layer_height = 1
reduce_crossing_wall = 0
layer_height = 0.2
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 5
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
brim_object_gap = 0
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 0
top_surface_acceleration = 0
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 0
travel_acceleration = 0
inner_wall_acceleration = 0
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 5%
ironing_spacing = 0.1
ironing_speed = 10
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 3
skirt_height = 1
skirt_loops = 2
minimum_sparse_infill_area = 10
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = grid
support_on_build_plate_only = 0
support_top_z_distance = 0.19
support_filament = 0
support_line_width = 0.38
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = -1
support_interface_spacing = 0.2
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 0.2
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 60%
tree_support_branch_angle = 40
tree_support_wall_count = 0
detect_thin_wall = 1
top_surface_pattern = monotonicline
top_surface_line_width = 0.38
top_shell_layers = 5
top_shell_thickness = 0.8
initial_layer_speed = 35%
initial_layer_infill_speed = 35%
outer_wall_speed = 25
inner_wall_speed = 30
internal_solid_infill_speed = 70
top_surface_speed = 35
gap_infill_speed = 25
sparse_infill_speed = 60
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 40
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers = Raise3D Pro3 Plus 0.4 nozzle (Dual),Raise3D Pro3 Plus 0.4 nozzle (Left),Raise3D Pro3 Plus 0.4 nozzle (Right)

[print:0.25mm Draft @Raise3D Pro3]
inherits = fdm_process_common
from = system
setting_id = GP004
instantiation = true
adaptive_layer_height = 1
reduce_crossing_wall = 0
layer_height = 0.25
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
brim_object_gap = 0
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 0
top_surface_acceleration = 0
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 0
travel_acceleration = 0
inner_wall_acceleration = 0
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 5%
ironing_spacing = 0.1
ironing_speed = 10
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 3
skirt_height = 1
skirt_loops = 2
minimum_sparse_infill_area = 10
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = grid
support_on_build_plate_only = 0
support_top_z_distance = 0.24
support_filament = 0
support_line_width = 0.38
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = -1
support_interface_spacing = 0.25
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 0.25
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 60%
tree_support_branch_angle = 40
tree_support_wall_count = 0
detect_thin_wall = 1
top_surface_pattern = monotonicline
top_surface_line_width = 0.38
top_shell_layers = 3
top_shell_thickness = 0.8
initial_layer_speed = 35%
initial_layer_infill_speed = 35%
outer_wall_speed = 35
inner_wall_speed = 30
internal_solid_infill_speed = 70
top_surface_speed = 35
gap_infill_speed = 25
sparse_infill_speed = 60
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 40
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers = Raise3D Pro3 0.4 nozzle (Dual),Raise3D Pro3 0.4 nozzle (Left),Raise3D Pro3 0.4 nozzle (Right)

[print:0.25mm Draft @Raise3D Pro3Plus]
inherits = fdm_process_common
from = system
setting_id = GP004
instantiation = true
adaptive_layer_height = 1
reduce_crossing_wall = 0
layer_height = 0.25
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 10
brim_width = 5
brim_object_gap = 0
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 0
top_surface_acceleration = 0
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 0
travel_acceleration = 0
inner_wall_acceleration = 0
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
infill_combination = 0
sparse_infill_line_width = 0.4
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 5%
ironing_spacing = 0.1
ironing_speed = 10
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 3
skirt_height = 1
skirt_loops = 2
minimum_sparse_infill_area = 10
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -20
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = grid
support_on_build_plate_only = 0
support_top_z_distance = 0.24
support_filament = 0
support_line_width = 0.38
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = -1
support_interface_spacing = 0.25
support_interface_speed = 100%
support_base_pattern = rectilinear
support_base_pattern_spacing = 0.25
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 60%
tree_support_branch_angle = 40
tree_support_wall_count = 0
detect_thin_wall = 1
top_surface_pattern = monotonicline
top_surface_line_width = 0.38
top_shell_layers = 3
top_shell_thickness = 0.8
initial_layer_speed = 35%
initial_layer_infill_speed = 35%
outer_wall_speed = 35
inner_wall_speed = 30
internal_solid_infill_speed = 70
top_surface_speed = 35
gap_infill_speed = 25
sparse_infill_speed = 60
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 40
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers = Raise3D Pro3 Plus 0.4 nozzle (Dual),Raise3D Pro3 Plus 0.4 nozzle (Left),Raise3D Pro3 Plus 0.4 nozzle (Right)