[vendor]
repo_id = orcaslicer-fff
name = RolohaunDesign
config_version = 02.03.02.60
description = RolohaunDesign Printer Profiles
force_update = 0

[printer_model:Rolohaun Delta Flyer Refit]
model_id = RDFR1_1
nozzle_diameter = 0.4
machine_tech = FFF
family = RolohaunDesign
bed_model = 
bed_texture = bedtexture-rook-green-120.png
hotend_model = 
default_materials = Generic PLA @System;Generic PETG @System

[printer_model:Rook MK1 LDO]
model_id = RKMK1_1
nozzle_diameter = 0.4;0.2;0.6;0.8
machine_tech = FFF
family = RolohaunDesign
bed_model = 
bed_texture = bedtexture-rook-green-120.png
hotend_model = 
default_materials = Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 500
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 165
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
default_print_profile = 
machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_pause_gcode = M601

[printer:fdm_common_Rook MK1 LDO]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = klipper
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 8000,8000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 8000,8000
machine_max_acceleration_x = 8000,8000
machine_max_acceleration_y = 8000,8000
machine_max_acceleration_z = 500,500
machine_max_speed_e = 25,25
machine_max_speed_x = 420,420
machine_max_speed_y = 420,420
machine_max_speed_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 12,12
machine_max_jerk_y = 12,12
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 165
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 0.8
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 50
deretraction_speed = 40
z_hop_types = Normal Lift
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
default_filament_profile = Generic PLA @System
default_print_profile = 0.20mm Standard @Rook MK1 LDO
bed_exclude_area = 0x0
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M109 S[nozzle_temperature_initial_layer]
PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]

machine_end_gcode = PRINT_END
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_pause_gcode = PAUSE
scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:Rolohaun Delta Flyer Refit 0.4 nozzle]
inherits = fdm_common_Rook MK1 LDO
from = system
instantiation = true
setting_id = RDFR_01
bed_custom_model = 
printer_structure = delta
deretraction_speed = 60
machine_max_acceleration_extruding = 10000,20000
machine_max_acceleration_x = 10000,20000
machine_max_acceleration_y = 10000,20000
machine_start_gcode = PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]

min_layer_height = 0.04
nozzle_type = brass
printable_area = 54.7907x4.79357,54.1644x9.55065,53.1259x14.235,51.6831x18.8111,49.8469x23.244,47.6314x27.5,45.0534x31.5467,42.1324x35.3533,38.8909x38.8909,35.3533x42.1324,31.5467x45.0534,27.5x47.6314,23.244x49.8469,18.8111x51.6831,14.235x53.1259,9.55065x54.1644,4.79357x54.7907,3.36778e-15x55,-4.79357x54.7907,-9.55065x54.1644,-14.235x53.1259,-18.8111x51.6831,-23.244x49.8469,-27.5x47.6314,-31.5467x45.0534,-35.3533x42.1324,-38.8909x38.8909,-42.1324x35.3533,-45.0534x31.5467,-47.6314x27.5,-49.8469x23.244,-51.6831x18.8111,-53.1259x14.235,-54.1644x9.55065,-54.7907x4.79357,-55x6.73556e-15,-54.7907x-4.79357,-54.1644x-9.55065,-53.1259x-14.235,-51.6831x-18.8111,-49.8469x-23.244,-47.6314x-27.5,-45.0534x-31.5467,-42.1324x-35.3533,-38.8909x-38.8909,-35.3533x-42.1324,-31.5467x-45.0534,-27.5x-47.6314,-23.244x-49.8469,-18.8111x-51.6831,-14.235x-53.1259,-9.55065x-54.1644,-4.79357x-54.7907,-1.01033e-14x-55,4.79357x-54.7907,9.55065x-54.1644,14.235x-53.1259,18.8111x-51.6831,23.244x-49.8469,27.5x-47.6314,31.5467x-45.0534,35.3533x-42.1324,38.8909x-38.8909,42.1324x-35.3533,45.0534x-31.5467,47.6314x-27.5,49.8469x-23.244,51.6831x-18.8111,53.1259x-14.235,54.1644x-9.55065,54.7907x-4.79357,55x-1.34711e-14
printer_model = Rolohaun Delta Flyer Refit
printable_height = 115
retraction_length = 1.8
retraction_speed = 60
support_multi_bed_types = 1
thumbnails = 48x48/PNG, 300x300/PNG
z_hop = 0.8

[printer:Rook MK1 LDO 0.2 nozzle]
inherits = fdm_common_Rook MK1 LDO
from = system
setting_id = RKMK1_m002
instantiation = true
printer_model = Rook MK1 LDO
nozzle_diameter = 0.2
max_layer_height = 0.16
min_layer_height = 0.04
printer_variant = 0.2
printable_area = 0x0,110x0,110x110,0x110
printable_height = 111

[printer:Rook MK1 LDO 0.4 nozzle]
inherits = fdm_common_Rook MK1 LDO
from = system
setting_id = RKMK1_m001
instantiation = true
printer_model = Rook MK1 LDO
nozzle_diameter = 0.4
printer_variant = 0.4
printable_area = 0x0,110x0,110x110,0x110
printable_height = 111

[printer:Rook MK1 LDO 0.6 nozzle]
inherits = fdm_common_Rook MK1 LDO
from = system
setting_id = RKMK1_m003
instantiation = true
printer_model = Rook MK1 LDO
nozzle_diameter = 0.6
max_layer_height = 0.4
min_layer_height = 0.12
printer_variant = 0.6
printable_area = 0x0,110x0,110x110,0x110
printable_height = 111

[printer:Rook MK1 LDO 0.8 nozzle]
inherits = fdm_common_Rook MK1 LDO
from = system
setting_id = RKMK1_m004
instantiation = true
printer_model = Rook MK1 LDO
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
printable_area = 0x0,110x0,110x110,0x110
printable_height = 111

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_thickness = 0
bridge_speed = 25
internal_bridge_speed = 70
brim_width = 5
brim_object_gap = 0.1
compatible_printers = 
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 1000
initial_layer_acceleration = 500
top_surface_acceleration = 1000
travel_acceleration = 1000
inner_wall_acceleration = 1000
outer_wall_acceleration = 700
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
enable_arc_fitting = 0
wall_infill_order = inner wall/outer wall/infill
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_print_height = 0.2
infill_combination = 0
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode
detect_overhang_wall = 1
slowdown_for_curled_perimeters = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
line_width = 110%
inner_wall_line_width = 110%
outer_wall_line_width = 100%
top_surface_line_width = 93.75%
sparse_infill_line_width = 110%
initial_layer_line_width = 120%
internal_solid_infill_line_width = 120%
support_line_width = 96%
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 3
min_skirt_length = 4
skirt_loops = 0
minimum_sparse_infill_area = 15
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
support_filament = 0
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 80
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 30
tree_support_wall_count = 0
tree_support_with_infill = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_shell_thickness = 0.8
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
layer_height = 0.2
bottom_shell_layers = 3
top_shell_layers = 4
bridge_flow = 1
initial_layer_speed = 45
initial_layer_infill_speed = 45
outer_wall_speed = 45
inner_wall_speed = 80
sparse_infill_speed = 150
internal_solid_infill_speed = 150
top_surface_speed = 50
gap_infill_speed = 30
travel_speed = 200

[print:fdm_process_Rook MK1 LDO_common]
inherits = fdm_process_common
from = system
instantiation = false
default_acceleration = 10000
top_surface_acceleration = 5000
travel_acceleration = 10000
inner_wall_acceleration = 8000
outer_wall_acceleration = 5000
initial_layer_acceleration = 2000
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 150
inner_wall_speed = 200
internal_solid_infill_speed = 300
top_surface_speed = 120
gap_infill_speed = 200
sparse_infill_speed = 300
travel_speed = 500
travel_jerk = 12
outer_wall_jerk = 7
inner_wall_jerk = 7
default_jerk = 9
infill_jerk = 12
top_surface_jerk = 7
initial_layer_jerk = 7
exclude_object = 1

[print:0.08mm Extra Fine @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p001
instantiation = true
layer_height = 0.08
bottom_shell_layers = 7
top_shell_layers = 9
support_top_z_distance = 0.08
support_bottom_z_distance = 0.08
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.2 nozzle,Rook MK1 LDO 0.6 nozzle

[print:0.08mm Super Fine @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
bottom_shell_layers = 4
initial_layer_infill_speed = 100
initial_layer_speed = 80
layer_height = 0.08
min_skirt_length = 8
skirt_height = 1
skirt_loops = 2
sparse_infill_density = 5%
top_shell_layers = 6
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
wall_loops = 4
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.10mm Fine @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
bottom_shell_layers = 4
initial_layer_infill_speed = 100
initial_layer_speed = 80
layer_height = 0.1
min_skirt_length = 8
skirt_height = 1
skirt_loops = 2
sparse_infill_density = 5%
top_shell_layers = 6
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
wall_loops = 4
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.12mm Fine @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p002
instantiation = true
layer_height = 0.12
bottom_shell_layers = 5
top_shell_layers = 6
support_top_z_distance = 0.08
support_bottom_z_distance = 0.08
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.2 nozzle,Rook MK1 LDO 0.6 nozzle

[print:0.16mm Optimal @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
initial_layer_infill_speed = 100
initial_layer_speed = 80
layer_height = 0.16
min_skirt_length = 8
skirt_height = 1
skirt_loops = 2
sparse_infill_density = 10%
top_shell_layers = 5
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.16mm Optimal @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p003
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
support_top_z_distance = 0.16
support_bottom_z_distance = 0.16
layer_height = 0.16
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.2 nozzle,Rook MK1 LDO 0.6 nozzle,Rook MK1 LDO 0.8 nozzle

[print:0.20mm Standard @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
initial_layer_infill_speed = 100
initial_layer_speed = 80
min_skirt_length = 8
skirt_height = 1
skirt_loops = 2
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.20mm Standard @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p004
instantiation = true
layer_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.6 nozzle,Rook MK1 LDO 0.8 nozzle

[print:0.24mm Draft @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
bottom_shell_layers = 2
initial_layer_infill_speed = 100
initial_layer_speed = 80
layer_height = 0.24
min_skirt_length = 8
skirt_height = 1
skirt_loops = 2
sparse_infill_density = 10%
top_shell_layers = 3
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
wall_loops = 2
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.24mm Draft @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p005
instantiation = true
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
layer_height = 0.24
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.6 nozzle,Rook MK1 LDO 0.8 nozzle

[print:0.28mm Extra Draft @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p006
instantiation = true
layer_height = 0.28
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.6 nozzle,Rook MK1 LDO 0.8 nozzle

[print:0.28mm Rough Draft @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
bottom_shell_layers = 2
initial_layer_infill_speed = 100
initial_layer_speed = 80
layer_height = 0.28
min_skirt_length = 8
skirt_height = 1
skirt_loops = 2
sparse_infill_density = 10%
top_shell_layers = 3
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
wall_loops = 2
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.2mm Vase Mode @Delta Flyer Refit]
inherits = fdm_process_Rook MK1 LDO_common
from = system
instantiation = true
bottom_shell_layers = 4
initial_layer_infill_speed = 100
initial_layer_speed = 80
min_skirt_length = 8
outer_wall_line_width = 1
skirt_height = 1
skirt_loops = 2
sparse_infill_density = 0%
spiral_mode = 1
top_shell_layers = 0
top_solid_infill_flow_ratio = 0.95
travel_speed = 300
wall_loops = 1
compatible_printers = Rolohaun Delta Flyer Refit 0.4 nozzle

[print:0.32mm Standard @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p007
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.32
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.4 nozzle,Rook MK1 LDO 0.6 nozzle,Rook MK1 LDO 0.8 nozzle

[print:0.40mm Standard @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p008
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.40
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.6 nozzle,Rook MK1 LDO 0.8 nozzle

[print:0.56mm Standard @Rook MK1 LDO]
inherits = fdm_process_Rook MK1 LDO_common
from = system
setting_id = RKMK1_p009
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.56
initial_layer_print_height = 0.2
compatible_printers = Rook MK1 LDO 0.8 nozzle