[printer:*common*]
printer_vendor = AnkerMake
# General
## Size and coordinates
max_print_height = 250
z_offset = 0
## Capabilities
#extruders_count = 1
single_extruder_multi_material = 0
## Firmware
gcode_flavor = marlin2
thumbnails = 256x256
thumbnails_format = PNG
silent_mode = 0
remaining_times = 1
## Advanced
use_relative_e_distances = 1
use_firmware_retraction = 0
use_volumetric_e = 0
variable_layer_height = 1
# Custom G-code
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
autoemit_temperature_commands = 1
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
toolchange_gcode = 
between_objects_gcode = 
color_change_gcode = M600
pause_print_gcode = M601
template_custom_gcode = 
# Machine limits
## General
### machine_limits_usage = emit_to_gcode  time_estimate_only  ignore
machine_limits_usage = time_estimate_only
## Maximum feedrates
machine_max_feedrate_e = 100
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 50
## Maximum accelerations
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 10000
machine_max_acceleration_travel = 10000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 10000
## Jerk limits
machine_max_jerk_x = 15, 15
machine_max_jerk_y = 15, 15
machine_max_jerk_z = 0.3, 0.3
machine_max_jerk_e = 3, 3
machine_min_extruding_rate = 0, 0
machine_min_travel_rate = 0, 0
# Extruder 1 2 3 4 5 6
## Size
nozzle_diameter = 0.4
## Preview
extruder_colour = #9BE198
## Layer height limits
min_layer_height = 0.08
max_layer_height = 0.32
## Position (for multi-extruder printers)
extruder_offset = 0x0
## Retraction
retract_length = 3
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_speed = 60
deretract_speed = 0
retract_restart_extra = 0
retract_before_travel = 0.8
retract_layer_change = 1
wipe = 0
retract_before_wipe = 0%
## Retraction when tool is disabled (advanced settings for multi-extruder setups)
retract_length_toolchange = 4
retract_restart_extra_toolchange = 0
# Notes
printer_notes = Base printer notes is EMPTY!
default_print_profile = 
default_filament_profile = Generic PLA+ @ANKER
printer_technology = FFF
printer_settings_id =