[print:0.10mm DETAIL @E2D i311]
inherits = *0.10mm*; *0.4nozzle*; *i311*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.20
perimeters = 3
top_solid_layers = 8
bottom_solid_layers = 7
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
extra_perimeters = 0
detect_thin_walls = 0
thick_bridges = 0
overhangs = 1
infill_anchor = 2
raft_contact_distance = 0.15
support_material_interface_layers = 5
support_material_interface_spacing = 0.2
support_material_contact_distance = 0.17
perimeter_speed = 45
small_perimeter_speed = 25
external_perimeter_speed = 25
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 35
support_material_speed = 40
support_material_interface_speed = 85%
bridge_speed = 20
gap_fill_speed = 40
ironing_speed = 15
first_layer_speed = 20
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 500
perimeter_acceleration = 700
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1250
infill_acceleration = 1500
bridge_acceleration = 700
first_layer_acceleration = 600
first_layer_acceleration_over_raft = 0
wipe_tower_acceleration = 0
travel_acceleration = 0
default_acceleration = 1000
extrusion_width = 0.45
first_layer_extrusion_width = 0.5
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.4
support_material_extrusion_width = 0.35
infill_overlap = 10%
elefant_foot_compensation = 0.2