[print:*common*]
# Print presets for common printers
avoid_crossing_perimeters = 0
bridge_angle = 0
bridge_flow_ratio = 0.95
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 500
dont_support_bridges = 1
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
extra_perimeters = 0
fill_angle = 45
fill_density = 15%
fill_pattern = grid
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 23%
interface_shells = 0
min_skirt_length = 4
notes = 
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
perimeter_extruder = 1
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 6
skirt_height = 1
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extruder = 1
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
wipe_tower = 0
xy_size_compensation = 0
# speed
gap_fill_enabled = 1
perimeter_speed = 60
external_perimeter_speed = 50%
solid_infill_speed = 50%
infill_speed = 80
top_solid_infill_speed = 25%
support_material_speed = 60
support_material_interface_speed = 50%
brim_speed = 50%
bridge_speed = 60
bridge_speed_internal = 100%
overhangs_speed = 100%
gap_fill_speed = 30
gap_fill_flow_match_perimeter = 0
thin_walls_speed = 100%
ironing_speed = 50%
travel_speed = 150
travel_speed_z = 0
first_layer_min_speed = 0
first_layer_speed = 20
first_layer_infill_speed = 0
first_layer_speed_over_raft = 30
small_perimeter_speed = 25%
small_perimeter_min_length = 6
small_perimeter_max_length = 20
max_volumetric_speed = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
# extrusion_width
extrusion_width = 0
extrusion_spacing = 
first_layer_extrusion_width = 111%
first_layer_extrusion_spacing = 
perimeter_extrusion_width = 111%
perimeter_extrusion_spacing = 
external_perimeter_extrusion_width = 105%
external_perimeter_extrusion_spacing = 
infill_extrusion_width = 111%
infill_extrusion_spacing = 
solid_infill_extrusion_width = 111%
solid_infill_extrusion_spacing = 
top_infill_extrusion_width = 105%
top_infill_extrusion_spacing = 
support_material_extrusion_width = 0
skirt_extrusion_width = 130%