[printer:MakerGear M3 Single Extruder]
inherits = *default*
bed_shape = 0x0,200x0,200x251,0x251
default_filament_profile = "MakerGear PLA @MakerGear"
default_print_profile = 0.20mm Normal @0.35 nozzle MakerGear
end_gcode = M104 S0 ; turn off extruder\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG1 Z200 Y0 X215 F10000\nM106 S0\nM84 ; disable motors
host_type = octoprint
machine_max_acceleration_e = 2000, 2000
machine_max_acceleration_extruding = 1000, 1000
machine_max_acceleration_retracting = 2000, 2000
machine_max_acceleration_x = 1200, 1200
machine_max_acceleration_y = 1200, 1200
machine_max_acceleration_z = 10, 10
machine_max_feedrate_e = 30, 30
machine_max_feedrate_x = 300, 300
machine_max_feedrate_y = 300, 300
machine_max_feedrate_z = 10, 10
machine_max_jerk_e = 10, 10
machine_max_jerk_x = 5, 5
machine_max_jerk_y = 5, 5
machine_max_jerk_z = 1, 1
max_print_height = 200
nozzle_diameter = 0.35
printer_model = MAKERGEAR_M3_SE
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M3_SE\n 
printer_variant = 0.35
start_gcode = G28 ; home all axes\nG1 X215 Y40 Z0.1 F10000 ; move off the bed and bring the bed up\nM109 S[first_layer_temperature_[current_extruder]]\nG92 E0 ; zero extruder\nG1 X195 Z0.1 F1000; scrape off any ooze\nG1 Z5 ; lift\nG1 X170 Y3 F10000; move to unused front edge\nG1 Z0.30 F1000\nG1 X40 E20 F1000\nG1 X30 Z0.05 F1000 ; wipe off tail\nG1 Z1\nG92 E0\nM211 S0 ;disable software endstops\n; ok now you can start 
# thumbnails = 16x16,220x124