[filament:mycusini 3D Choco @MC2.0]
filament_vendor = Print4Taste
bed_temperature = 0
bridge_fan_speed = 0
compatible_printers_condition = printer_notes=~/.*PRINT4TASTE.*/ and printer_notes=~/.*MYCUSINI2.0.*/
cooling = 1
disable_fan_first_layers = 0
end_filament_gcode = ""
extrusion_multiplier = 0.95
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #F4A6FF
filament_density = 1.26
filament_diameter = 18
filament_max_volumetric_speed = 8
filament_notes = "Full cartridge: 18 x 100 mm, 32g\nDensity: 1.26 g/cm3\nCut cartrige size: 18 x ~50 mm, 16g\nMycusini 2.0 does not require temperature control in gcode\n\n\nDon't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRINT4TASTE\nPRINTER_MODEL_MYCUSINI2.0"
ilament_retract_before_wipe = 30%
filament_retract_layer_change = 1
filament_retract_length = 0.3
filament_retract_lift = 1
filament_type = GLAZE
filament_wipe = 1
first_layer_bed_temperature = 0
first_layer_temperature = 0
max_fan_speed = 0
min_fan_speed = 0
min_print_speed = 9
slowdown_below_layer_time = 15
start_filament_gcode = ""
temperature = 0