[printer:*DeltiQ 2*]
inherits = *DeltiQ*
default_filament_profile = "Prusament PLA @DQ2"
default_print_profile = 0.20mm Normal @DQ2
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100  ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
gcode_flavor = reprapfirmware
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
pause_print_gcode = M25
start_gcode = ; START_GCODE\n\nT0 ; Select Titan extruder\nM220 S100 ; Set feedmultiply back to 100percent\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nG28 ; Home all axes\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 9000
machine_max_acceleration_extruding = 1000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_travel = 2000
machine_max_acceleration_x = 2000
machine_max_acceleration_y = 2000
machine_max_acceleration_z = 2000
machine_max_feedrate_e = 50
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300
machine_max_feedrate_z = 300
machine_max_jerk_e = 20
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 10
machine_min_extruding_rate = 0
machine_min_travel_rate = 0