[filament:Numakers ASA @COREONE HF0.8]
inherits = Numakers ASA @HF0.8; *ABS08HFC1*
min_fan_speed = 20
max_fan_speed = 30
slowdown_below_layer_time = 20
bridge_fan_speed = 30
fan_below_layer_time = 20
enable_dynamic_fan_speeds = 1
overhang_fan_speed_0 = 25
first_layer_bed_temperature = 110
filament_max_volumetric_speed = 20

; [filament:Creality Ender-PLA]
; inherits = *PLA*
; first_layer_bed_temperature = 60
; bed_temperature = 60
; first_layer_temperature = 220
; temperature = 215
; filament_vendor = Creality
; filament_cost = 15
; filament_density = 1.25
; filament_spool_weight = 150
; filament_max_volumetric_speed = 15
; start_filament_gcode = "{if printer_notes!~/.*(MK3.5|MINIIS).*/}\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.038{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K14{elsif nozzle_diameter[0]==0.8};{else}M900 K23{endif} ; Filament gcode LA 1.0\n{endif}\n\n{if printer_notes=~/.*MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.13{elsif nozzle_diameter[0]==0.8}0.09{elsif nozzle_diameter[0]==0.4}0.21{elsif nozzle_diameter[0]==0.25}0.63{else}0{endif}\n{endif}\n\n{if printer_notes=~/.*MK3.5.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.027{elsif nozzle_diameter[0]==0.5}0.019{elsif nozzle_diameter[0]==0.6}0.016{elsif nozzle_diameter[0]==0.8}0.011{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.06{else}0{endif} ; Filament gcode\n{endif}"

; [filament:*PA_Creality_PLA*]
; start_filament_gcode = "{if printer_notes!~/.*(MK4IS|XLIS|MK4S|MK3.9S|COREONE).*/}\nM900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.038{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.05{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.8}0.011{else}0{endif} ; Legacy LA\n{else}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.027{elsif nozzle_diameter[filament_extruder_id]==0.5}0.019{elsif nozzle_diameter[filament_extruder_id]==0.6}0.016{elsif nozzle_diameter[filament_extruder_id]==0.8}0.011{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{else}0{endif} ; Pressure advance\n{endif}\n\nM142 S36 ; set heatbreak target temp"

; [filament:*PAHF_Creality_PLA*]
; start_filament_gcode = "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.027{elsif nozzle_diameter[filament_extruder_id]==0.5}0.019{elsif nozzle_diameter[filament_extruder_id]==0.6}0.016{elsif nozzle_diameter[filament_extruder_id]==0.8}0.011{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"

; [filament:Creality Ender-PLA @PG]
; inherits = Creality Ender-PLA; *PLAPG*; *PLAIS*; *PA_Creality_PLA*

; [filament:Creality Ender-PLA @PG 0.6]
; inherits = Creality Ender-PLA @PG; *PLA06PG*; *PLAIS*; *PA_Creality_PLA*

; [filament:Creality Ender-PLA @PG 0.8]
; inherits = Creality Ender-PLA @PG; *PLA08PG*; *PLAIS*; *PA_Creality_PLA*

; [filament:Creality Ender-PLA @MK4S]
; inherits = Creality Ender-PLA @PG; *PLAPG4S*

; [filament:Creality Ender-PLA @MK4S 0.6]
; inherits = Creality Ender-PLA @PG 0.6; *PLA06PG4S*

; [filament:Creality Ender-PLA @MK4S 0.8]
; inherits = Creality Ender-PLA @PG 0.8; *PLA08PG4S*

; [filament:Creality Ender-PLA @XL]
; inherits = Creality Ender-PLA @PG; *PLAXL*

; [filament:Creality Ender-PLA @XL 0.6]
; inherits = Creality Ender-PLA @PG 0.6; *PLA06XL*

; [filament:Creality Ender-PLA @XL 0.8]
; inherits = Creality Ender-PLA @PG 0.8; *PLA08XL*

; [filament:Creality Ender-PLA @HF0.4]
; inherits = Creality Ender-PLA @PG; *PLAHF*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 20

; [filament:Creality Ender-PLA @HF0.5]
; inherits = Creality Ender-PLA @HF0.4; *PLA05HF*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 22

; [filament:Creality Ender-PLA @HF0.6]
; inherits = Creality Ender-PLA @PG 0.6; *PLA06HF*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 28

; [filament:Creality Ender-PLA @HF0.8]
; inherits = Creality Ender-PLA @PG 0.8; *PLA08HF*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 32

; [filament:Creality Ender-PLA @MK4S HF0.4]
; inherits = Creality Ender-PLA @HF0.4; *PLAHF4S*

; [filament:Creality Ender-PLA @MK4S HF0.5]
; inherits = Creality Ender-PLA @HF0.5; *PLA05HF4S*

; [filament:Creality Ender-PLA @MK4S HF0.6]
; inherits = Creality Ender-PLA @HF0.6; *PLA06HF4S*

; [filament:Creality Ender-PLA @MK4S HF0.8]
; inherits = Creality Ender-PLA @HF0.8; *PLA08HF4S*

; [filament:Creality Ender-PLA @XL HF0.4]
; inherits = Creality Ender-PLA @PG; *PLAHFXL*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 20

; [filament:Creality Ender-PLA @XL HF0.5]
; inherits = Creality Ender-PLA @PG 0.6; *PLA05HFXL*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 22

; [filament:Creality Ender-PLA @XL HF0.6]
; inherits = Creality Ender-PLA @PG 0.6; *PLA06HFXL*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 28

; [filament:Creality Ender-PLA @XL HF0.8]
; inherits = Creality Ender-PLA @PG 0.8; *PLA08HFXL*; *PAHF_Creality_PLA*
; filament_max_volumetric_speed = 32

; [filament:Creality Ender-PLA @COREONE]
; inherits = Creality Ender-PLA @PG; *PLAPGC1*; *PA_Creality_PLA*

; [filament:Creality Ender-PLA @COREONE 0.6]
; inherits = Creality Ender-PLA @PG 0.6; *PLA06PGC1*

; [filament:Creality Ender-PLA @COREONE 0.8]
; inherits = Creality Ender-PLA @PG 0.8; *PLA08PGC1*

; [filament:Creality Ender-PLA @COREONE HF0.4]
; inherits = Creality Ender-PLA @HF0.4; *PLAHFC1*

; [filament:Creality Ender-PLA @COREONE HF0.5]
; inherits = Creality Ender-PLA @HF0.5; *PLA05HFC1*

; [filament:Creality Ender-PLA @COREONE HF0.6]
; inherits = Creality Ender-PLA @HF0.6; *PLA06HFC1*

; [filament:Creality Ender-PLA @COREONE HF0.8]
; inherits = Creality Ender-PLA @HF0.8; *PLA08HFC1*