[printer:*common*]
bed_custom_model = 
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
between_objects_gcode = 
default_filament_profile = "Generic PLA @EasyThreeD"
default_print_profile = "0.20mm NORMAL @EasyThreeD"
deretract_speed = 35
end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG91 ;\nG1 Z+5 F3000\nG28 X0 Y0 ; park print head\nM84 ; disable motors\nG90 ;
extra_loading_move = -2
extruder_colour = "#FCE94F"
gcode_flavor = marlin
high_current_on_filament_swap = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000, 5000
machine_max_acceleration_extruding = 10000, 10000
machine_max_acceleration_retracting = 1000, 1000
machine_max_acceleration_travel = 0, 0
machine_max_acceleration_x = 10000, 10000
machine_max_acceleration_y = 10000, 10000
machine_max_acceleration_z = 500, 500
machine_max_feedrate_e = 60, 60
machine_max_feedrate_x = 500, 500
machine_max_feedrate_y = 500, 500
machine_max_feedrate_z = 10, 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0, 0
machine_min_travel_rate = 0, 0
pause_print_gcode = M601
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_EASYTHREED\nPRINTER_MODEL_K10\n
remaining_times = 1
retract_before_travel = 1
retract_before_wipe = 70%
retract_layer_change = 1
retract_length = 0.9
retract_length_toolchange = 1
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 45
silent_mode = 0
single_extruder_multi_material = 1
start_gcode = G21 ;\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\nG28 X0 Y0 ; home\nG28 Z0 ; home\nG1  Z5 F1000 ; move print head up
thumbnails = 48x48,300x300
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
extruder_clearance_height = 36
extruder_clearance_radius = 65