[vendor]
repo_id = orcaslicer-fff
name = Custom Printer
config_version = 02.03.02.60
description = My configurations
force_update = 0

[printer_model:Generic Klipper Printer]
model_id = my_klipper_01
nozzle_diameter = 0.4;0.2;0.6;0.8
machine_tech = FFF
family = MyPrinter
bed_model = 
bed_texture = orcaslicer_bed_texture.svg
hotend_model = 
default_materials = Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System

[printer_model:Generic Marlin Printer]
model_id = my_marlin_01
nozzle_diameter = 0.4
machine_tech = FFF
family = MyPrinter
bed_model = 
bed_texture = orcaslicer_bed_texture.svg
hotend_model = 
default_materials = Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System

[printer_model:Generic RRF Printer]
model_id = my_rrf_01
nozzle_diameter = 0.4
machine_tech = FFF
family = MyPrinter
bed_model = 
bed_texture = orcaslicer_bed_texture.svg
hotend_model = 
default_materials = Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System

[printer_model:Generic ToolChanger Printer]
model_id = my_toolchanger_01
nozzle_diameter = 0.4;0.2;0.6;0.8
machine_tech = FFF
family = MyPrinter
bed_model = Custom_350_bed.stl
bed_texture = orcaslicer_bed_texture.svg
hotend_model = 
default_materials = Generic PLA @MyToolChanger;Generic ABS @MyToolChanger;Generic PLA-CF @MyToolChanger;Generic PETG @MyToolChanger;Generic TPU @MyToolChanger;Generic ASA @MyToolChanger;Generic PC @MyToolChanger;Generic PVA @MyToolChanger;Generic PA @MyToolChanger;Generic PA-CF @MyToolChanger

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 500
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
default_print_profile = 
machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_pause_gcode = M601

[printer:MyMarlin 0.4 nozzle]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Generic Marlin Printer
gcode_flavor = marlin
machine_end_gcode = G1 E-1.0 F2100 ; retract
G92 E0.0
G1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament
G4 ; wait
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 X0 Y105 F3000 ; park print head
M84 ; disable motors
machine_start_gcode = G90 ; use absolute coordinates
M83 ; extruder relative mode
M204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]
M104 S[first_layer_temperature] ; set extruder temp
M140 S[first_layer_bed_temperature] ; set bed temp
G28 ; home all
G1 Y1.0 Z0.3 F1000 ; move print head up
M190 S[first_layer_bed_temperature] ; wait for bed temp
M109 S[first_layer_temperature] ; wait for extruder temp
G92 E0.0
; initial load
G1 X205.0 E19 F1000
G1 Y1.6
G1 X5.0 E19 F1000
G92 E0.0
; intro line
G1 Y2.0 Z0.2 F1000
G1 X65.0 E9.0 F1000
G1 X105.0 E12.5 F1000
G92 E0.0
max_layer_height = 0.32
retraction_length = 0.9
retraction_minimum_travel = 1
retraction_speed = 45
deretraction_speed = 35
wipe = 0
z_hop = 0.4
nozzle_diameter = 0.4
printable_area = 0x0,250x0,250x250,0x250
printable_height = 250

[printer:fdm_klipper_common]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = klipper
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 20000,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,20000
machine_max_acceleration_x = 20000,20000
machine_max_acceleration_y = 20000,20000
machine_max_acceleration_z = 500,200
machine_max_speed_e = 25,25
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 0.8
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 30
deretraction_speed = 30
z_hop_types = Normal Lift
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
default_filament_profile = Generic PLA @System
default_print_profile = 0.20mm Standard @MyKlipper
bed_exclude_area = 0x0
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M109 S[nozzle_temperature_initial_layer]
PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]

machine_end_gcode = PRINT_END
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_pause_gcode = PAUSE
scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:fdm_rrf_common]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = reprapfirmware
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 20000,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,20000
machine_max_acceleration_x = 20000,20000
machine_max_acceleration_y = 20000,20000
machine_max_acceleration_z = 500,200
machine_max_speed_e = 25,25
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 0.8
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 30
deretraction_speed = 30
z_hop_types = Normal Lift
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
default_filament_profile = Generic PLA @System
default_print_profile = 0.20mm Standard @MyRRF
bed_exclude_area = 0x0
scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0
machine_start_gcode = ; Prime Filament Sensor for Runout
M581 P1 T2 S-1 R0
M950 J1 C"nil" ; Input 1 e0 Filament Sensor 
M591 D0 P2 C"e0stop" S1 ; Filament Runout Sensor

M83  ; extruder relative mode

M140 S[first_layer_bed_temperature] ; set bed temp
M109 S140 ; Set extruder temp 140C before bed level
M190 S[first_layer_bed_temperature] ; wait for bed temp

;G28 W
G32 ; Levels Z Tilt and probes Z=0
G29 S0 ; mesh bed leveling
G1 X0 Y0 Z2 F2000
M109 S[first_layer_temperature] ; wait for extruder temp

G1 X10 Y-7 Z0.3 F1000.0 ; go outside print area
G92 E0.0
G1 Z0.2 E8 ; Purge Bubble
G1 X60.0 E9.0  F1000.0 ; intro line
G1 X100.0 E12.5  F1000.0 ; intro line
G92 E0.0
machine_end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}
G1 X0 Y200 F3600 ; park
{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}
M221 S100 ; reset flow
M900 K0 ; reset LA
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
M84 ; disable motors
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_pause_gcode = M601

[printer:MyKlipper 0.2 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM002
instantiation = true
printer_model = Generic Klipper Printer
nozzle_diameter = 0.2
max_layer_height = 0.16
min_layer_height = 0.04
printer_variant = 0.2
printable_area = 0x0,250x0,250x250,0x250
printable_height = 250

[printer:MyKlipper 0.4 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM001
instantiation = true
printer_model = Generic Klipper Printer
nozzle_diameter = 0.4
printer_variant = 0.4
printable_area = 0x0,250x0,250x250,0x250
printable_height = 250

[printer:MyKlipper 0.6 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM003
instantiation = true
printer_model = Generic Klipper Printer
nozzle_diameter = 0.6
max_layer_height = 0.4
min_layer_height = 0.12
printer_variant = 0.6
printable_area = 0x0,250x0,250x250,0x250
printable_height = 250

[printer:MyKlipper 0.8 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM004
instantiation = true
printer_model = Generic Klipper Printer
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
printable_area = 0x0,250x0,250x250,0x250
printable_height = 250

[printer:fdm_toolchanger_common]
inherits = fdm_klipper_common
from = system
instantiation = false
gcode_flavor = klipper
single_extruder_multi_material = 0
default_filament_profile = Generic PLA @MyToolChanger
default_print_profile = 0.20mm Standard @MyToolChanger
max_layer_height = 0.32,0.32,0.32,0.32,0.32
min_layer_height = 0.08,0.08,0.08,0.08,0.08
deretraction_speed = 30,30,30,30,30
extruder_colour = #FCE94F,#FCE94F,#FCE94F,#FCE94F,#FCE94F
extruder_offset = 0x0,0x0,0x0,0x0,0x0
long_retractions_when_cut = 0,0,0,0,0
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
retract_before_wipe = 70%,70%,70%,70%,70%
retract_length_toolchange = 2,2,2,2,2
retract_lift_above = 0,0,0,0,0
retract_lift_below = 0,0,0,0,0
retract_lift_enforce = All Surfaces,All Surfaces,All Surfaces,All Surfaces,All Surfaces
retract_restart_extra = 0,0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0,0
retract_when_changing_layer = 1,1,1,1,1
retraction_distances_when_cut = 18,18,18,18,18
retraction_length = 0.8,0.8,0.8,0.8,0.8
retraction_minimum_travel = 1,1,1,1,1
retraction_speed = 30,30,30,30,30
travel_slope = 3,3,3,3,3
wipe = 1,1,1,1,1
wipe_distance = 1,1,1,1,1
z_hop = 0.4,0.4,0.4,0.4,0.4
z_hop_types = Normal Lift,Normal Lift,Normal Lift,Normal Lift,Normal Lift
purge_in_prime_tower = 0
machine_pause_gcode = M601
change_filament_gcode = 
machine_start_gcode = PRINT_START  TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]

M83
; set extruder temp
{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}
{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}
{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}
{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}
{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}
{if (is_extruder_used[0]) and initial_tool != 0}
;
; purge first tool
;
G1 F{travel_speed * 60}
M109 T0 S{first_layer_temperature[0]}
T0; pick the tool
G92 E0 ; reset extruder position

G0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet
G0 X40 E9 F800 ; continue purging and wipe the nozzle
G0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E{- 1.5 * retract_length[0]} F2400 ; retract
{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable
G92 E0 ; reset extruder position

M104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0
{endif}
{if (is_extruder_used[1]) and initial_tool != 1}
;
; purge second tool
;
G1 F{travel_speed * 60}
M109 T1 S{first_layer_temperature[1]}
T1; pick the tool
G92 E0 ; reset extruder position

G0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet
G0 X80 E9 F800 ; continue purging and wipe the nozzle
G0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E{- 1.5 * retract_length[1]} F2400 ; retract
{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable
G92 E0 ; reset extruder position

M104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1
{endif}
{if (is_extruder_used[2]) and initial_tool != 2}
;
; purge third tool
;
G1 F{travel_speed * 60}
M109 T2 S{first_layer_temperature[2]}
T2; pick the tool
G92 E0 ; reset extruder position

G0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet
G0 X220 E9 F800 ; continue purging and wipe the nozzle
G0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E{- 1.5 * retract_length[2]} F2400 ; retract
{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable
G92 E0 ; reset extruder position

M104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2
{endif}
{if (is_extruder_used[3]) and initial_tool != 3}
;
; purge fourth tool
;
G1 F{travel_speed * 60}
M109 T3 S{first_layer_temperature[3]}
T3; pick the tool
G92 E0 ; reset extruder position

G0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet
G0 X260 E9 F800 ; continue purging and wipe the nozzle
G0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E{- 1.5 * retract_length[3]} F2400 ; retract
{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable
G92 E0 ; reset extruder position

M104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3
{endif}
{if (is_extruder_used[4]) and initial_tool != 4}
;
; purge fifth tool
;
G1 F{travel_speed * 60}
M109 T4 S{first_layer_temperature[4]}
T4; pick the tool
G92 E0 ; reset extruder position

G0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet
G0 X260 E9 F800 ; continue purging and wipe the nozzle
G0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E{- 1.5 * retract_length[4]} F2400 ; retract
{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable
G92 E0 ; reset extruder position

M104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4
{endif}
;
; purge initial tool
;
G1 F{travel_speed * 60}
M109 T{initial_tool} S{first_layer_temperature[initial_tool]}
T{initial_tool}; pick the tool
G92 E0 ; reset extruder position

G0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge
G0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet
G0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle
G0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed
G0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed
G1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract
{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}
G92 E0 ; reset extruder position

scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:MyRRF 0.4 nozzle]
inherits = fdm_rrf_common
from = system
setting_id = GM003
instantiation = true
printer_model = Generic RRF Printer
nozzle_diameter = 0.4
printable_area = 0x0,250x0,250x250,0x250
printable_height = 250

[printer:MyToolChanger 0.2 nozzle]
inherits = fdm_toolchanger_common
from = system
setting_id = GM_CUSTOM_001
instantiation = true
printer_model = Generic ToolChanger Printer
nozzle_diameter = 0.2,0.2,0.2,0.2,0.2
max_layer_height = 0.16
min_layer_height = 0.04
printer_variant = 0.2
printable_area = 0x0,350x0,350x350,0x350
printable_height = 300

[printer:MyToolChanger 0.4 nozzle]
inherits = fdm_toolchanger_common
from = system
setting_id = GM_CUSTOM_002
instantiation = true
printer_model = Generic ToolChanger Printer
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
printer_variant = 0.4
printable_area = 0x0,350x0,350x350,0x350
printable_height = 300

[printer:MyToolChanger 0.6 nozzle]
inherits = fdm_toolchanger_common
from = system
setting_id = GM_CUSTOM_003
instantiation = true
printer_model = Generic ToolChanger Printer
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.4
min_layer_height = 0.12
printer_variant = 0.6
printable_area = 0x0,350x0,350x350,0x350
printable_height = 300

[printer:MyToolChanger 0.8 nozzle]
inherits = fdm_toolchanger_common
from = system
setting_id = GM_CUSTOM_004
instantiation = true
printer_model = Generic ToolChanger Printer
nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
printable_area = 0x0,350x0,350x350,0x350
printable_height = 300

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_thickness = 0
bridge_speed = 50
brim_width = 5
brim_object_gap = 0.1
compatible_printers = 
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 1000
initial_layer_acceleration = 500
top_surface_acceleration = 1000
travel_acceleration = 1000
inner_wall_acceleration = 1000
outer_wall_acceleration = 700
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
enable_arc_fitting = 0
wall_infill_order = inner wall/outer wall/infill
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_print_height = 0.2
infill_combination = 0
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode
detect_overhang_wall = 1
slowdown_for_curled_perimeters = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
line_width = 110%
inner_wall_line_width = 110%
outer_wall_line_width = 100%
top_surface_line_width = 93.75%
sparse_infill_line_width = 110%
initial_layer_line_width = 120%
internal_solid_infill_line_width = 120%
support_line_width = 96%
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 3
min_skirt_length = 4
skirt_loops = 0
minimum_sparse_infill_area = 15
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
support_filament = 0
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 80
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 30
tree_support_wall_count = 0
tree_support_with_infill = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_shell_thickness = 0.8
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
layer_height = 0.2
bottom_shell_layers = 3
top_shell_layers = 4
bridge_flow = 1
initial_layer_speed = 45
initial_layer_infill_speed = 45
outer_wall_speed = 45
inner_wall_speed = 80
sparse_infill_speed = 150
internal_solid_infill_speed = 150
top_surface_speed = 50
gap_infill_speed = 30
travel_speed = 200

[print:fdm_process_klipper_common]
inherits = fdm_process_common
from = system
instantiation = false
default_acceleration = 5000
top_surface_acceleration = 3000
travel_acceleration = 7000
inner_wall_acceleration = 5000
outer_wall_acceleration = 3000
initial_layer_acceleration = 500
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 120
inner_wall_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 100
gap_infill_speed = 100
sparse_infill_speed = 200
travel_speed = 350
exclude_object = 1

[print:fdm_process_marlin_common]
inherits = fdm_process_common
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 50
brim_width = 5
brim_object_gap = 0.1
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 1000
top_surface_acceleration = 1000
travel_acceleration = 1000
inner_wall_acceleration = 1000
outer_wall_acceleration = 1000
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 500
initial_layer_line_width = 0.5
initial_layer_print_height = 0.2
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
inner_wall_line_width = 0.45
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 1
skirt_loops = 0
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = default
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_filament = 0
support_line_width = 0.4
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 40
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 45
tree_support_wall_count = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_surface_line_width = 0.4
top_shell_layers = 3
top_shell_thickness = 0.8
initial_layer_speed = 45
initial_layer_infill_speed = 60
outer_wall_speed = 60
inner_wall_speed = 80
internal_solid_infill_speed = 80
top_surface_speed = 50
gap_infill_speed = 80
sparse_infill_speed = 80
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
enable_arc_fitting = 0
compatible_printers = MyMarlin 0.4 nozzle

[print:fdm_process_rrf_common]
inherits = fdm_process_common
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 50
brim_width = 5
brim_object_gap = 0.1
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 5000
top_surface_acceleration = 3000
travel_acceleration = 7000
inner_wall_acceleration = 5000
outer_wall_acceleration = 3000
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 500
initial_layer_line_width = 0.5
initial_layer_print_height = 0.2
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
inner_wall_line_width = 0.45
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 1
skirt_loops = 0
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = default
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_filament = 0
support_line_width = 0.4
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 45
tree_support_wall_count = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_surface_line_width = 0.4
top_shell_layers = 3
top_shell_thickness = 0.8
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 120
inner_wall_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 100
gap_infill_speed = 100
sparse_infill_speed = 200
travel_speed = 350
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
enable_arc_fitting = 0
compatible_printers = MyRRF 0.4 nozzle
exclude_object = 1

[print:0.08mm Extra Fine @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.08
bottom_shell_layers = 7
top_shell_layers = 9
support_top_z_distance = 0.08
support_bottom_z_distance = 0.08
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.2 nozzle,MyKlipper 0.6 nozzle

[print:0.12mm Fine @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.12
bottom_shell_layers = 5
top_shell_layers = 6
support_top_z_distance = 0.08
support_bottom_z_distance = 0.08
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.2 nozzle,MyKlipper 0.6 nozzle

[print:0.15mm Optimal @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
layer_height = 0.15
support_top_z_distance = 0.15
support_bottom_z_distance = 0.15
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.2 nozzle,MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.16mm Optimal @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
support_top_z_distance = 0.16
support_bottom_z_distance = 0.16
layer_height = 0.16
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.2 nozzle,MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.20mm Standard @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.24mm Draft @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
layer_height = 0.24
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.28mm Extra Draft @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.28
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.32mm Standard @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.32
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.4 nozzle,MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.40mm Standard @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.40
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.6 nozzle,MyKlipper 0.8 nozzle

[print:0.56mm Standard @MyKlipper]
inherits = fdm_process_klipper_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.56
initial_layer_print_height = 0.2
compatible_printers = MyKlipper 0.8 nozzle

[print:fdm_process_mytoolchanger_common]
inherits = fdm_process_klipper_common
from = system
instantiation = false
default_acceleration = 5000
top_surface_acceleration = 3000
travel_acceleration = 7000
inner_wall_acceleration = 5000
outer_wall_acceleration = 3000
initial_layer_acceleration = 500
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 120
inner_wall_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 100
gap_infill_speed = 100
sparse_infill_speed = 200
travel_speed = 350
exclude_object = 1
enable_prime_tower = 1
wipe_tower_cone_angle = 25
wipe_tower_extra_spacing = 150%
wipe_tower_rotation_angle = 90
ooze_prevention = 1
standby_temperature_delta = -40
preheat_time = 30
preheat_steps = 1

[print:0.08mm Extra Fine @MyMarlin]
inherits = fdm_process_marlin_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.08
bottom_shell_layers = 7
top_shell_layers = 9

[print:0.12mm Fine @MyMarlin]
inherits = fdm_process_marlin_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.12
bottom_shell_layers = 5
top_shell_layers = 6

[print:0.15mm Optimal @MyMarlin]
inherits = fdm_process_marlin_common
from = system
setting_id = GP004
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
layer_height = 0.15

[print:0.20mm Standard @MyMarlin]
inherits = fdm_process_marlin_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.2
bottom_shell_layers = 3
top_shell_layers = 4

[print:0.24mm Draft @MyMarlin]
inherits = fdm_process_marlin_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.24
top_surface_line_width = 0.45
bottom_shell_layers = 3
top_shell_layers = 4

[print:0.28mm Extra Draft @MyMarlin]
inherits = fdm_process_marlin_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.28
top_surface_line_width = 0.45
bottom_shell_layers = 3
top_shell_layers = 4

[print:0.08mm Extra Fine @MyRRF]
inherits = fdm_process_rrf_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.08
bottom_shell_layers = 7
top_shell_layers = 9

[print:0.12mm Fine @MyRRF]
inherits = fdm_process_rrf_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.12
bottom_shell_layers = 5
top_shell_layers = 6

[print:0.15mm Optimal @MyRRF]
inherits = fdm_process_rrf_common
from = system
setting_id = GP004
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
layer_height = 0.15

[print:0.20mm Standard @MyRRF]
inherits = fdm_process_rrf_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.2
bottom_shell_layers = 3
top_shell_layers = 4

[print:0.24mm Draft @MyRRF]
inherits = fdm_process_rrf_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.24
top_surface_line_width = 0.45
bottom_shell_layers = 3
top_shell_layers = 4

[print:0.28mm Extra Draft @MyRRF]
inherits = fdm_process_rrf_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.28
top_surface_line_width = 0.45
bottom_shell_layers = 3
top_shell_layers = 4

[print:0.08mm Extra Fine @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.08
bottom_shell_layers = 7
top_shell_layers = 9
support_top_z_distance = 0.08
support_bottom_z_distance = 0.08
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle

[print:0.12mm Fine @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.12
bottom_shell_layers = 5
top_shell_layers = 6
support_top_z_distance = 0.08
support_bottom_z_distance = 0.08
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle

[print:0.15mm Optimal @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
layer_height = 0.15
support_top_z_distance = 0.15
support_bottom_z_distance = 0.15
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.16mm Optimal @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
bottom_shell_layers = 4
top_shell_layers = 5
support_top_z_distance = 0.16
support_bottom_z_distance = 0.16
layer_height = 0.16
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.20mm Standard @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.24mm Draft @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
layer_height = 0.24
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.28mm Extra Draft @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
layer_height = 0.28
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.32mm Extra Draft @MyToolChanger]
renamed_from = 0.32mm Standard @MyToolChanger
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.32
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.40mm Standard @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.40
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[print:0.56mm Standard @MyToolChanger]
inherits = fdm_process_mytoolchanger_common
from = system
setting_id = GP004
instantiation = true
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24
layer_height = 0.56
initial_layer_print_height = 0.2
compatible_printers = MyToolChanger 0.8 nozzle

[filament:Generic ABS @MyToolChanger]
renamed_from = My Generic ABS @MyToolChanger
inherits = Generic ABS @System
from = system
setting_id = GFB99_MTC_0
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic ASA @MyToolChanger]
renamed_from = My Generic ASA @MyToolChanger
inherits = Generic ASA @System
from = system
setting_id = GFB98_MTC_0
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PA @MyToolChanger]
renamed_from = My Generic PA @MyToolChanger
inherits = Generic PA @System
from = system
setting_id = GFN99_MTC_0
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PA-CF @MyToolChanger]
renamed_from = My Generic PA-CF @MyToolChanger
inherits = Generic PA-CF @System
from = system
setting_id = GFN98_MTC_0
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PC @MyToolChanger]
renamed_from = My Generic PC @MyToolChanger
inherits = Generic PC @System
from = system
setting_id = GFC99_MTC_0
filament_id = GFC99
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PETG @MyToolChanger]
renamed_from = My Generic PETG @MyToolChanger
inherits = Generic PETG @System
from = system
setting_id = GFG99_MTC_0
filament_id = GFG99
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PLA @MyToolChanger]
renamed_from = My Generic PLA @MyToolChanger
inherits = Generic PLA @System
from = system
setting_id = GFL99_MTC_0
filament_id = GFL99
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PLA-CF @MyToolChanger]
renamed_from = My Generic PLA-CF @MyToolChanger
inherits = Generic PLA-CF @System
from = system
setting_id = GFL98_MTC_0
filament_id = GFL98
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic PVA @MyToolChanger]
renamed_from = My Generic PVA @MyToolChanger
inherits = Generic PVA @System
from = system
setting_id = GFS99_MTC_0
filament_id = GFS99
instantiation = true
filament_cooling_final_speed = 3.5
filament_cooling_initial_speed = 10
filament_cooling_moves = 2
filament_load_time = 10.5
filament_loading_speed = 10
filament_loading_speed_start = 50
filament_multitool_ramming = 1
filament_multitool_ramming_flow = 40
filament_stamping_distance = 45
filament_stamping_loading_speed = 29
filament_unload_time = 8.5
filament_unloading_speed = 100
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle

[filament:Generic TPU @MyToolChanger]
renamed_from = My Generic TPU @MyToolChanger
inherits = Generic TPU @System
from = system
setting_id = GFU99_MTC_0
filament_id = GFU99
instantiation = true
filament_max_volumetric_speed = 3.2
compatible_printers = MyToolChanger 0.4 nozzle,MyToolChanger 0.2 nozzle,MyToolChanger 0.6 nozzle,MyToolChanger 0.8 nozzle