mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-03 00:39:46 +00:00
Dark98
25 lines
1.7 KiB
INI
25 lines
1.7 KiB
INI
[printer:*M1_SpeedPrinter*]
|
||
# Presets for M1 printers
|
||
inherits = *common*
|
||
machine_max_feedrate_x = 300
|
||
machine_max_feedrate_y = 300
|
||
machine_max_feedrate_z = 25
|
||
machine_max_feedrate_e = 60
|
||
machine_max_acceleration_x = 3000
|
||
machine_max_acceleration_y = 3000
|
||
machine_max_acceleration_z = 500
|
||
machine_max_acceleration_e = 5000
|
||
machine_max_acceleration_extruding = 3500
|
||
machine_max_acceleration_retracting = 3500
|
||
machine_max_jerk_x = 10
|
||
machine_max_jerk_y = 10
|
||
machine_max_jerk_z = 3
|
||
machine_max_jerk_e = 10
|
||
machine_min_extruding_rate = 0
|
||
machine_min_travel_rate = 5
|
||
extruder_colour = #F5DC1E
|
||
default_filament_profile = Geeetech PLA @Geeetech;
|
||
start_gcode = ;Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder
|
||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_M1
|
||
|