mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Dark98
48 lines
2.4 KiB
INI
48 lines
2.4 KiB
INI
[printer:SV01 PRO]
|
|
inherits = *common*
|
|
bed_shape = 0x0,280x0,280x240,0x240
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
deretract_speed = 0
|
|
end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n
|
|
extra_loading_move = -2
|
|
extruder_colour = #0080FF
|
|
gcode_flavor = marlin2
|
|
high_current_on_filament_swap = 0
|
|
machine_max_acceleration_e = 1000,5000
|
|
machine_max_acceleration_extruding = 500,1250
|
|
machine_max_acceleration_retracting = 500,1250
|
|
machine_max_acceleration_x = 500,1000
|
|
machine_max_acceleration_y = 500,1000
|
|
machine_max_acceleration_z = 100,200
|
|
machine_max_feedrate_e = 25,120
|
|
machine_max_feedrate_x = 300,200
|
|
machine_max_feedrate_y = 300,200
|
|
machine_max_feedrate_z = 5,12
|
|
machine_max_jerk_e = 5,2.5
|
|
machine_max_jerk_x = 10,10
|
|
machine_max_jerk_y = 10,10
|
|
machine_max_jerk_z = 0.4,0.4
|
|
machine_min_extruding_rate = 0,0
|
|
machine_min_travel_rate = 0,0
|
|
max_layer_height = 0.32
|
|
max_print_height = 300
|
|
min_layer_height = 0.1
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
printer_settings_id =
|
|
printer_technology = FFF
|
|
remaining_times = 0
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV01 PRO\n
|
|
retract_layer_change = 0
|
|
retract_length = 2
|
|
retract_length_toolchange = 10
|
|
silent_mode = 0
|
|
start_gcode = //M85 S180 ; For use with raspberry only, it kills the printer if it loses the USB connection and remains inactive for 3 minutes. It works in Marlin 1.1.6\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; Home all axes\nG29 ; Auto bed-level (BL-Touch) // Comment if you don't like the automatic level in each print\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z2.0 F3000.0 ; Move to start position\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X5 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
|
|
use_relative_e_distances = 0
|
|
printer_model = SV01 PRO
|
|
default_print_profile = 0.20mm SPEED @SV01
|
|
thumbnails = 160x120
|
|
|