Profiles/repos/orcaslicer-fff/Peopoly/02.03.02.60.ini

[vendor]
repo_id = orcaslicer-fff
name = Peopoly
config_version = 02.03.02.60
description = Peopoly configurations
force_update = 0

[printer_model:Peopoly Magneto X]
model_id = Peopoly-Magneto-X
nozzle_diameter = 0.4;0.6;0.8
machine_tech = FFF
family = Peopoly
bed_model = magnetox_model.stl
bed_texture = magnetox_model_texture.png
hotend_model = 
default_materials = Peopoly Generic PLA

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 100
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 30
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
z_hop_types = Auto Lift
default_print_profile = 0.20mm Standard @MagnetoX
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end

[printer:fdm_klipper_common]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = klipper
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 20000,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,20000
machine_max_acceleration_x = 20000,20000
machine_max_acceleration_y = 20000,20000
machine_max_acceleration_z = 500,200
machine_max_speed_e = 25,25
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 12,12
machine_max_jerk_y = 12,12
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 0.8
retract_length_toolchange = 2
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 30
deretraction_speed = 30
z_hop_types = Auto Lift
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = PAUSE
wipe = 1
default_filament_profile = Peopoly Generic PLA
default_print_profile = fdm_process_peopoly_common_0_2
bed_exclude_area = 0x0
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M109 S[nozzle_temperature_initial_layer]
PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]
; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh
; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}

machine_end_gcode = PRINT_END
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:Peopoly Magneto X 0.4 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM001
instantiation = true
printer_model = Peopoly Magneto X
nozzle_diameter = 0.4
printer_variant = 0.4
printable_area = 0x0,300x0,300x400,0x400
printable_height = 300

[printer:Peopoly Magneto X 0.6 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM002
instantiation = true
printer_model = Peopoly Magneto X
nozzle_diameter = 0.6
printer_variant = 0.6
printable_area = 0x0,300x0,300x400,0x400
printable_height = 300
max_layer_height = 0.42
min_layer_height = 0.12
retract_length_toolchange = 3
retraction_length = 1

[printer:Peopoly Magneto X 0.8 nozzle]
inherits = fdm_klipper_common
from = system
setting_id = GM003
instantiation = true
printer_model = Peopoly Magneto X
nozzle_diameter = 0.8
printer_variant = 0.8
printable_area = 0x0,300x0,300x400,0x400
printable_height = 300
max_layer_height = 0.56
min_layer_height = 0.16
retract_length_toolchange = 3
retraction_length = 3

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
only_one_wall_top = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.42
outer_wall_speed = 120
line_width = 0.45
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 20
gap_infill_speed = 30
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 5%
sparse_infill_speed = 50
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 2
inner_wall_line_width = 0.45
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.45
internal_solid_infill_speed = 40
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.15
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 40
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.42
top_surface_speed = 30
travel_speed = 400
enable_prime_tower = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
compatible_printers =

[print:fdm_process_peopoly_common]
inherits = fdm_process_common
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 25
internal_bridge_speed = 70
brim_width = 5
brim_object_gap = 0.1
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 5000
top_surface_acceleration = 3000
travel_acceleration = 7000
inner_wall_acceleration = 5000
outer_wall_acceleration = 3000
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 500
initial_layer_line_width = 0.5
initial_layer_print_height = 0.2
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 80%
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
inner_wall_line_width = 0.4
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 1
skirt_loops = 0
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = default
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_filament = 0
support_line_width = 0.4
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 45
tree_support_wall_count = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_surface_line_width = 0.4
top_shell_layers = 3
top_shell_thickness = 0.8
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 120
inner_wall_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 100
gap_infill_speed = 100
sparse_infill_speed = 200
travel_speed = 350
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
enable_arc_fitting = 0
accel_to_decel_enable = 1
accel_to_decel_factor = 50%
default_jerk = 9
initial_layer_jerk = 9
outer_wall_jerk = 7
infill_jerk = 12
travel_jerk = 12
inner_wall_jerk = 7
top_surface_jerk = 9
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[print:fdm_process_pply_common]
inherits = fdm_process_common
from = system
instantiation = false
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_speed = 50
brim_object_gap = 0.1
compatible_printers_condition = 
draft_shield = disabled
elefant_foot_compensation = 0
enable_arc_fitting = 0
outer_wall_acceleration = 5000
wall_infill_order = inner wall/outer wall/infill
line_width = 0.42
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 500
initial_layer_line_width = 0.5
initial_layer_speed = 80
gap_infill_speed = 150
sparse_infill_speed = 250
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 0
inner_wall_speed = 150
seam_position = aligned
skirt_height = 1
skirt_loops = 0
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 150
initial_layer_infill_speed = 60
resolution = 0.012
support_type = normal(auto)
support_style = default
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_expansion = 0
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_diameter = 2
tree_support_branch_angle = 45
tree_support_wall_count = 1
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_surface_speed = 200
top_shell_layers = 3
top_shell_thickness = 0.8
travel_speed = 500
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 35
wall_generator = classic
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[print:fdm_process_peopoly_common_0_2]
inherits = fdm_process_peopoly_common
from = system
instantiation = false
outer_wall_line_width = 0.22
line_width = 0.22
sparse_infill_line_width = 0.22
initial_layer_line_width = 0.25
initial_layer_print_height = 0.1
inner_wall_line_width = 0.22
internal_solid_infill_line_width = 0.22
support_line_width = 0.22
top_surface_line_width = 0.22
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[print:fdm_process_pply_0.16]
inherits = fdm_process_pply_common
from = system
instantiation = false
layer_height = 0.16
elefant_foot_compensation = 0.15
bottom_shell_layers = 4
top_shell_layers = 4
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 300
sparse_infill_speed = 330
internal_solid_infill_speed = 350
gap_infill_speed = 320
overhang_1_4_speed = 60
overhang_2_4_speed = 30
overhang_3_4_speed = 10
support_threshold_angle = 25

[print:fdm_process_pply_0.20]
inherits = fdm_process_pply_common
from = system
instantiation = false
elefant_foot_compensation = 0.15
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 100
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 300
sparse_infill_speed = 300
internal_solid_infill_speed = 300
gap_infill_speed = 300

[print:fdm_process_pply_0.24]
inherits = fdm_process_pply_common
from = system
instantiation = false
layer_height = 0.24
elefant_foot_compensation = 0.15
top_surface_line_width = 0.45
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 180
inner_wall_speed = 200
sparse_infill_speed = 230
internal_solid_infill_speed = 230
gap_infill_speed = 230
support_threshold_angle = 35

[print:fdm_process_pply_0.28]
inherits = fdm_process_pply_common
from = system
instantiation = false
layer_height = 0.28
elefant_foot_compensation = 0.15
top_surface_line_width = 0.45
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 150
inner_wall_speed = 180
sparse_infill_speed = 200
internal_solid_infill_speed = 200
gap_infill_speed = 200
support_threshold_angle = 40

[print:fdm_process_pply_0.30_nozzle_0.6]
inherits = fdm_process_pply_common
from = system
instantiation = false
layer_height = 0.30
elefant_foot_compensation = 0.15
top_surface_line_width = 0.45
top_shell_thickness = 0.6
line_width = 0.6
outer_wall_line_width = 0.6
initial_layer_line_width = 0.6
sparse_infill_line_width = 0.6
inner_wall_line_width = 0.6
internal_solid_infill_line_width = 0.6
support_line_width = 0.6
bridge_flow = 1
initial_layer_speed = 100
initial_layer_infill_speed = 105
outer_wall_speed = 120
inner_wall_speed = 180
sparse_infill_speed = 180
internal_solid_infill_speed = 200
gap_infill_speed = 200

[print:fdm_process_pply_0.40_nozzle_0.8]
inherits = fdm_process_pply_common
from = system
instantiation = false
layer_height = 0.4
initial_layer_print_height = 0.4
bridge_flow = 1
line_width = 0.82
outer_wall_line_width = 0.82
initial_layer_line_width = 0.82
sparse_infill_line_width = 0.82
inner_wall_line_width = 0.82
internal_solid_infill_line_width = 0.82
support_line_width = 0.82
top_surface_line_width = 0.82
top_surface_pattern = monotonic
initial_layer_speed = 45
initial_layer_infill_speed = 80
sparse_infill_speed = 150
top_surface_speed = 180
bridge_speed = 30
overhang_3_4_speed = 25
overhang_4_4_speed = 5

[print:0.16mm Optimal @Magneto X]
inherits = fdm_process_pply_0.16
from = system
setting_id = GP003
instantiation = true
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.20mm ABS-GF 0.4 Nozzle Standard @MagnetoX]
inherits = fdm_process_pply_0.20
from = system
setting_id = GP015
instantiation = true
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 100
initial_layer_infill_speed = 140
outer_wall_speed = 160
inner_wall_speed = 200
sparse_infill_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 140
gap_infill_speed = 200
wall_loops = 3
brim_type = no_brim
skirt_distance = 2
skirt_loops = 2
top_shell_layers = 5
bottom_shell_layers = 5
sparse_infill_density = 20
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.20mm PET-CF 0.4 Nozzle Standard @MagnetoX]
inherits = fdm_process_pply_0.20
from = system
setting_id = GP016
instantiation = true
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 100
initial_layer_infill_speed = 140
outer_wall_speed = 160
inner_wall_speed = 200
sparse_infill_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 140
gap_infill_speed = 200
wall_loops = 3
brim_type = no_brim
skirt_distance = 2
skirt_loops = 2
top_shell_layers = 5
bottom_shell_layers = 5
sparse_infill_density = 20
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.20mm Standard @Magneto X]
inherits = fdm_process_pply_0.20
from = system
setting_id = GP004
instantiation = true
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.20mm Strength @Magneto X]
inherits = fdm_process_pply_0.20
from = system
setting_id = GP013
instantiation = true
outer_wall_speed = 120
wall_loops = 6
sparse_infill_density = 25%
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.24mm Draft @Magneto X]
inherits = fdm_process_pply_0.24
from = system
setting_id = GP005
instantiation = true
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.28mm Extra Draft @Magneto X]
inherits = fdm_process_pply_0.28
from = system
setting_id = GP006
instantiation = true
compatible_printers = Peopoly Magneto X 0.4 nozzle

[print:0.30mm Standard @Magneto X 0.6 nozzle]
inherits = fdm_process_pply_0.30_nozzle_0.6
from = system
setting_id = GP008
instantiation = true
outer_wall_speed = 120
compatible_printers = Peopoly Magneto X 0.6 nozzle

[print:0.40mm Standard @Magneto X 0.8 nozzle]
inherits = fdm_process_pply_0.40_nozzle_0.8
from = system
setting_id = GP009
instantiation = true
compatible_printers = Peopoly Magneto X 0.8 nozzle

[filament:fdm_filament_common]
from = system
instantiation = false
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 60
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_z_hop_types = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
bed_type = Cool Plate
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 0
fan_max_speed = 100
fan_min_speed = 35
slow_down_min_speed = 10
slow_down_layer_time = 8
filament_start_gcode = ; Filament gcode

nozzle_temperature = 200
temperature_vitrification = 100

[filament:fdm_filament_abs]
inherits = fdm_filament_common
from = system
instantiation = false
activate_air_filtration = 1
cool_plate_temp = 0
cool_plate_temp_initial_layer = 0
eng_plate_temp = 90
eng_plate_temp_initial_layer = 90
fan_cooling_layer_time = 30
fan_max_speed = 80
fan_min_speed = 10
filament_cost = 20
filament_density = 1.04
filament_max_volumetric_speed = 22
filament_type = ABS
hot_plate_temp = 90
hot_plate_temp_initial_layer = 90
nozzle_temperature = 270
nozzle_temperature_initial_layer = 275
nozzle_temperature_range_high = 280
nozzle_temperature_range_low = 240
overhang_fan_speed = 80
overhang_fan_threshold = 25%
reduce_fan_stop_start_freq = 1
slow_down_layer_time = 3
slow_down_min_speed = 20
textured_plate_temp = 90
textured_plate_temp_initial_layer = 90

[filament:fdm_filament_petg]
inherits = fdm_filament_common
from = system
instantiation = false
eng_plate_temp = 0
eng_plate_temp_initial_layer = 0
fan_cooling_layer_time = 20
fan_min_speed = 20
filament_cost = 30
filament_density = 1.27
filament_max_volumetric_speed = 18
filament_type = PETG
hot_plate_temp = 70
hot_plate_temp_initial_layer = 70
nozzle_temperature = 260
nozzle_temperature_initial_layer = 270
nozzle_temperature_range_high = 280
nozzle_temperature_range_low = 220
reduce_fan_stop_start_freq = 1
temperature_vitrification = 70
textured_plate_temp = 80
textured_plate_temp_initial_layer = 80
filament_start_gcode = ; filament start gcode
{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180
{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255
{endif};Prevent PLA from jamming

{if activate_air_filtration[current_extruder] && support_air_filtration}
M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} 
{endif}

[filament:fdm_filament_pla]
inherits = fdm_filament_common
from = system
instantiation = false
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 15
filament_type = PLA
filament_density = 1.24
filament_cost = 20
cool_plate_temp = 35
eng_plate_temp = 0
hot_plate_temp = 45
cool_plate_temp_initial_layer = 35
eng_plate_temp_initial_layer = 0
hot_plate_temp_initial_layer = 45
nozzle_temperature_initial_layer = 225
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
overhang_fan_threshold = 50%
close_fan_the_first_x_layers = 1
nozzle_temperature = 220
temperature_vitrification = 60
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 230
slow_down_min_speed = 10
slow_down_layer_time = 4
additional_cooling_fan_speed = 70
filament_start_gcode = ; filament start gcode

[filament:Peopoly Generic ABS]
inherits = fdm_filament_abs
from = system
filament_id = GFSL99
instantiation = true
filament_flow_ratio = 0.93
filament_type = ABS
enable_pressure_advance = 1
pressure_advance = 0.02
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[filament:Peopoly Lancer ABS-GF]
inherits = fdm_filament_abs
from = system
setting_id = GFSL99
filament_id = GFL99
instantiation = true
filament_flow_ratio = 0.91
nozzle_temperature_initial_layer = 260
nozzle_temperature = 270
hot_plate_temp_initial_layer = 90
hot_plate_temp = 100
filament_max_volumetric_speed = 35
fan_max_speed = 40
slow_down_layer_time = 6
overhang_fan_speed = 30
reduce_fan_stop_start_freq = 0
filament_type = ABS
enable_pressure_advance = 1
filament_retraction_length = 0.8
filament_retraction_speed = 60
filament_deretraction_speed = 60
filament_wipe = 1
filament_wipe_distance = 1
pressure_advance = 0.016
filament_vendor = Peopoly
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[filament:Peopoly Lancer PET-CF]
inherits = fdm_filament_abs
from = system
setting_id = GFSL99
filament_id = GFL99
instantiation = true
filament_flow_ratio = 0.90
filament_density = 1.3
nozzle_temperature_initial_layer = 280
nozzle_temperature = 300
hot_plate_temp_initial_layer = 70
hot_plate_temp = 80
filament_max_volumetric_speed = 35
fan_max_speed = 40
slow_down_layer_time = 8
overhang_fan_speed = 30
reduce_fan_stop_start_freq = 0
filament_type = PET-CF
enable_pressure_advance = 1
filament_retraction_length = 0.8
filament_retraction_speed = 60
filament_deretraction_speed = 60
filament_wipe = 1
filament_wipe_distance = 1
pressure_advance = 0.005
filament_vendor = Peopoly
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[filament:Peopoly Generic PETG]
inherits = fdm_filament_petg
from = system
setting_id = GSPETG-1
filament_id = GFPETG-1
instantiation = true
filament_flow_ratio = 0.92
nozzle_temperature_initial_layer = 245
nozzle_temperature = 235
hot_plate_temp_initial_layer = 70
hot_plate_temp = 70
filament_max_volumetric_speed = 20
fan_max_speed = 40
slow_down_layer_time = 8
filament_type = PETG
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[filament:Peopoly Lancer PETG-C]
inherits = fdm_filament_petg
from = system
setting_id = GFSL99
filament_id = GFL99
instantiation = true
fan_cooling_layer_time = 20
fan_max_speed = 40
fan_min_speed = 5
filament_max_volumetric_speed = 32
nozzle_temperature_initial_layer = 235
nozzle_temperature = 225
filament_flow_ratio = 0.90
enable_pressure_advance = 1
pressure_advance = 0.04
overhang_fan_speed = 100
filament_vendor = Peopoly
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[filament:Peopoly Generic PLA]
inherits = fdm_filament_pla
from = system
setting_id = GFSL99
filament_id = GFL99
instantiation = true
filament_flow_ratio = 0.92
enable_pressure_advance = 1
pressure_advance = 0.02
nozzle_temperature_initial_layer = 225
nozzle_temperature = 220
hot_plate_temp_initial_layer = 60
hot_plate_temp = 60
filament_max_volumetric_speed = 18
fan_max_speed = 60
slow_down_layer_time = 8
filament_type = PLA
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle

[filament:Peopoly Lancer PLA-C]
inherits = fdm_filament_pla
from = system
setting_id = GFSL99
filament_id = GFL99
instantiation = true
filament_flow_ratio = 0.92
nozzle_temperature_initial_layer = 215
nozzle_temperature = 210
hot_plate_temp_initial_layer = 70
hot_plate_temp = 70
filament_max_volumetric_speed = 35
fan_max_speed = 50
slow_down_layer_time = 6
filament_type = PLA
enable_pressure_advance = 1
pressure_advance = 0.03
filament_vendor = Peopoly
compatible_printers = Peopoly Magneto X 0.4 nozzle,Peopoly Magneto X 0.6 nozzle,Peopoly Magneto X 0.8 nozzle