Profiles/repos/orcaslicer-fff/re3D/02.01.01.00.ini

[vendor]
repo_id = orcaslicer-fff
name = re3D
config_version = 02.01.01.00
description = re3D configurations
force_update = 0

[printer_model:re3D Gigabot 4]
model_id = GB4
nozzle_diameter = 0.4;0.8
machine_tech = FFF
family = re3D
bed_model = 
bed_texture = Gigabot 4_buildplate_texture.png
hotend_model = GB-HOTEND.stl
default_materials = re3D PLA;re3D PETG;re3D PC;

[printer_model:re3D Gigabot 4 XLT]
model_id = GB4XLT
nozzle_diameter = 0.4;0.8
machine_tech = FFF
family = re3D
bed_model = 
bed_texture = Gigabot 4_buildplate_texture.png
hotend_model = GB-HOTEND.stl
default_materials = re3D PLA;re3D PETG;re3D PC;

[printer_model:re3D Terabot 4]
model_id = TB4
nozzle_diameter = 0.4;0.8
machine_tech = FFF
family = re3D
bed_model = 
bed_texture = Gigabot 4_buildplate_texture.png
hotend_model = GB-HOTEND.stl
default_materials = re3D PLA;re3D PETG;re3D PC;

[printer_model:re3D Gigabot X2]
model_id = GBX2
nozzle_diameter = 1.75
machine_tech = FFF
family = re3D
bed_model = 
bed_texture = Gigabot 4_buildplate_texture.png
hotend_model = GBX-HOTEND-NOZZLE.stl
default_materials = re3D rPP;re3D Greengate rPETG;

[printer_model:re3D Gigabot X2 XLT]
model_id = GBX2XLT
nozzle_diameter = 1.75
machine_tech = FFF
family = re3D
bed_model = 
bed_texture = Gigabot 4_buildplate_texture.png
hotend_model = GBX-HOTEND.stl
default_materials = re3D rPP;re3D Greengate rPETG;

[printer_model:re3D Terabot X2]
model_id = TBX2
nozzle_diameter = 1.75
machine_tech = FFF
family = re3D
bed_model = 
bed_texture = Gigabot 4_buildplate_texture.png
hotend_model = GBX-HOTEND.stl
default_materials = re3D rPP;re3D Greengate rPETG;

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = klipper
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 100
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.4
min_layer_height = 0.1
printable_height = 400
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 5
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
z_lift_type = NormalLift
default_print_profile = 0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle
machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end

[printer:fdm_re3D_common]
from = system
instantiation = false
inherits = fdm_machine_common
gcode_flavor = klipper
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 5000,5000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,20000
machine_max_acceleration_x = 5000,5000
machine_max_acceleration_y = 5000,5000
machine_max_acceleration_z = 5000,5000
machine_max_speed_e = 20,20
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_max_speed_z = 20,20
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 0.2,0.2
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.2
extruder_clearance_radius = 125
extruder_clearance_height_to_rod = 25
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1.0
retract_length_toolchange = 12
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = -0.08
retraction_speed = 200
deretraction_speed = 200
z_hop_types = Normal Lift
silent_mode = 0
single_extruder_multi_material = 0
machine_tool_change_time = 30
change_filament_gcode = 
machine_pause_gcode = PAUSE
wipe = 0
default_filament_profile = 
default_print_profile = 
bed_exclude_area = 0x0
machine_start_gcode = M220 S100
M221 S100
G28
G92 E0
G1 Z0.3 F200

machine_end_gcode = M104 S0 T0
M104 S0 T1
M140 S0

G28 X Y
M18
M107

layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

scan_first_layer = 0
auxiliary_fan = 0
extruders_count = 2

[printer:fgf_re3D_common]
from = system
instantiation = false
inherits = fdm_machine_common
gcode_flavor = klipper
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 5000,5000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,5000
machine_max_acceleration_x = 5000,5000
machine_max_acceleration_y = 5000,5000
machine_max_acceleration_z = 2000,2000
machine_max_speed_e = 60,60
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_max_speed_z = 20,20
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 0.2,0.2
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 2.25
min_layer_height = 0.3
extruder_clearance_radius = 70
printer_settings_id = 
printer_technology = FFF
purge_in_prime_tower = 0
enable_filament_ramming = 0
retraction_minimum_travel = 1
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 0
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 40
deretraction_speed = 30
z_hop_types = Normal Lift
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = M600
machine_pause_gcode = PAUSE
wipe = 1
default_filament_profile = re3D Greengate rPETG
default_print_profile = 1.0mm Standard @re3D fgf 1.75
bed_exclude_area = 0x0
machine_start_gcode = M220 S100
M221 S100
G28
G92 E0
G1 Z0.3 F200

machine_end_gcode = M104 S0 T0
M104 S0 T1
M104 S0 T2
M140 S0

G28 X Y
M18
M107

layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:re3D Gigabot 4 0.4 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fdm_re3D_common
printer_model = re3D Gigabot 4
nozzle_diameter = 0.4,0.4
printer_variant = 0.4
printable_area = 0x0,590x0,590x600,0x600
printable_height = 590
max_layer_height = 0.32
min_layer_height = 0.2
retraction_length = 0.6
default_print_profile = 0.28mm Standard @re3D fdm 0.4

[printer:re3D Gigabot 4 0.8 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fdm_re3D_common
printer_model = re3D Gigabot 4
nozzle_diameter = 0.8,0.8
printable_area = 0x0,590x0,590x600,0x600
printable_height = 590
max_layer_height = 0.64
min_layer_height = 0.3
retraction_length = 1.0
printer_variant = 0.8
default_print_profile = 0.2mm Standard @re3D fdm 0.8

[printer:re3D Gigabot 4 XLT 0.4 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fdm_re3D_common
printer_model = re3D Gigabot 4 XLT
nozzle_diameter = 0.4,0.4
printable_area = 0x0,590x0,590x760,0x760
printable_height = 900
max_layer_height = 0.32
min_layer_height = 0.2
retraction_length = 0.6
printer_variant = 0.4
default_print_profile = 0.28mm Standard @re3D fdm 0.4

[printer:re3D Gigabot 4 XLT 0.8 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fdm_re3D_common
printer_model = re3D Gigabot 4 XLT
nozzle_diameter = 0.8,0.8
printable_area = 0x0,600x0,600x760,0x760
printable_height = 900
max_layer_height = 0.64
min_layer_height = 0.2
retraction_length = 1.0
printer_variant = 0.8
default_print_profile = 0.2mm Standard @re3D fdm 0.8

[printer:re3D Terabot 4 0.4 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fgf_re3D_common
printer_model = re3D Terabot 4
nozzle_diameter = 0.4,0.4
printable_area = 0x0,915x0,915x915,0x915
printable_height = 1000
max_layer_height = 0.32
min_layer_height = 0.2
retraction_length = 0.6
printer_variant = 0.4
default_print_profile = 0.28mm Standard @re3D fdm 0.4

[printer:re3D Terabot 4 0.8 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fgf_re3D_common
printer_model = re3D Terabot 4
nozzle_diameter = 0.8,0.8
printable_area = 0x0,915x0,915x915,0x915
printable_height = 1000
max_layer_height = 0.64
min_layer_height = 0.2
retraction_length = 1.0
printer_variant = 0.8
default_print_profile = 0.2mm Standard @re3D fdm 0.8

[printer:re3D Gigabot X2 1.75 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fgf_re3D_common
printer_model = re3D Gigabot X2
nozzle_diameter = 1.75
printable_area = 0x0,552x0,552x593,0x593
printable_height = 470
extruder_clearance_height_to_rod = 220
extruder_clearance_height_to_lid = 630
max_layer_height = 1.4
min_layer_height = 0.4
printer_variant = 1.75

[printer:re3D Gigabot X2 XLT 1.75 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fgf_re3D_common
printer_model = re3D Gigabot X2 XLT
nozzle_diameter = 1.75
printable_area = 0x0,552x0,552x740,0x740
printable_height = 765
extruder_clearance_height_to_rod = 220
extruder_clearance_height_to_lid = 630
max_layer_height = 1.4
min_layer_height = 0.6
printer_variant = 1.75

[printer:re3D Terabot X2 1.75 nozzle]
setting_id = GM001
from = system
instantiation = true
inherits = fgf_re3D_common
printer_model = re3D Terabot X2
nozzle_diameter = 1.75
printable_area = 0x0,879x0,879x908,0x908
printable_height = 830
extruder_clearance_height_to_rod = 220
extruder_clearance_height_to_lid = 630
max_layer_height = 1.4
min_layer_height = 0.4
printer_variant = 1.75

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
compatible_printers = 
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.4
outer_wall_speed = 120
line_width = 0.45
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 20
gap_infill_speed = 30
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 25%
sparse_infill_speed = 50
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 3
inner_wall_line_width = 0.45
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.45
internal_solid_infill_speed = 40
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.15
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 30
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.4
top_surface_speed = 30
travel_speed = 400
enable_prime_tower = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0

[print:fdm_process_re3D_common]
from = system
instantiation = false
inherits = fdm_process_common
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 1
bridge_speed = 25
brim_width = 8
brim_object_gap = 0.1
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 5500
top_surface_acceleration = 500
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.0
enable_arc_fitting = 0
outer_wall_line_width = 0.44
wall_infill_order = inner wall/outer wall/infill
line_width = 0.44
infill_direction = 45
sparse_infill_density = 10%
sparse_infill_pattern = gyroid
initial_layer_acceleration = 500
travel_acceleration = 5500
inner_wall_acceleration = 5500
initial_layer_line_width = 0.6
initial_layer_print_height = 0.4
infill_combination = 0
sparse_infill_line_width = 0.44
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.1
ironing_speed = 20
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 0
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 45
overhang_2_4_speed = 35
overhang_3_4_speed = 25
overhang_4_4_speed = 15
inner_wall_line_width = 0.44
wall_loops = 2
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 10
skirt_height = 1
skirt_loops = 3
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.44
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 1
resolution = 0.012
support_type = normal(auto)
support_style = snug
support_on_build_plate_only = 0
support_top_z_distance = 0.22
support_bottom_z_distance = 0.22
support_filament = 0
support_line_width = 0.44
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = 1
support_interface_spacing = 0.5
support_interface_speed = 45
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 45
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 45
tree_support_wall_count = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_surface_line_width = 0.44
top_shell_layers = 4
top_shell_thickness = 0.6
initial_layer_speed = 30
initial_layer_infill_speed = 30
outer_wall_speed = 45
inner_wall_speed = 45
internal_solid_infill_speed = 45
top_surface_speed = 45
gap_infill_speed = 45
sparse_infill_speed = 45
travel_speed = 300
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 30
xy_hole_compensation = 0
xy_contour_compensation = 0
precise_outer_wall = 1
outer_wall_acceleration = 2500
bridge_acceleration = 5500
sparse_infill_acceleration = 5500
internal_solid_infill_acceleration = 5500
accel_to_decel_enable = 0
prime_volume = 200
ooze_prevention = 1
preheat_time = 30
initial_layer_travel_speed = 50
slow_down_layers = 2
small_perimeter_speed = 45
small_perimeter_threshold = 45
exclude_object = 1
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle

[print:fgf_process_re3D_common]
from = system
instantiation = false
inherits = fdm_process_common
adaptive_layer_height = 0
reduce_crossing_wall = 1
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 2
bottom_shell_thickness = 0
bridge_speed = 40
brim_type = no_brim
brim_width = 5
brim_object_gap = 0.1
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 500
top_surface_acceleration = 500
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
enable_arc_fitting = 1
outer_wall_line_width = 1.9
wall_infill_order = inner wall/outer wall/infill
line_width = 1.9
infill_direction = 45
sparse_infill_density = 20%
sparse_infill_pattern = gyroid
initial_layer_acceleration = 500
travel_acceleration = 700
inner_wall_acceleration = 500
initial_layer_line_width = 1.9
initial_layer_print_height = 1
infill_combination = 0
sparse_infill_line_width = 1.9
infill_wall_overlap = 50%
wall_generator = classic
interface_shells = 0
ironing_flow = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = no ironing
layer_height = 1
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 1.9
wall_loops = 2
print_settings_id = 
raft_layers = 0
seam_position = aligned
seam_gap = 0
staggered_inner_seams = 1
skirt_distance = 2
skirt_height = 1
skirt_loops = 3
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 1.9
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = default
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_filament = 0
support_line_width = 1.9
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 100
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 45
tree_support_wall_count = 0
detect_thin_wall = 0
top_surface_pattern = monotonic
top_surface_line_width = 1.9
top_shell_layers = 4
top_shell_thickness = 0
initial_layer_speed = 30
initial_layer_infill_speed = 30
outer_wall_speed = 50
inner_wall_speed = 50
internal_solid_infill_speed = 50
top_surface_speed = 50
gap_infill_speed = 60
sparse_infill_speed = 50
travel_speed = 75
enable_prime_tower = 0
wipe_tower_no_sparse_layers = 0
prime_tower_width = 35
xy_hole_compensation = 0
xy_contour_compensation = 0
infill_anchor = 2mm
ensure_vertical_shell_thickness = none
slow_down_layers = 1
default_jerk = 5
outer_wall_jerk = 9
inner_wall_jerk = 9
infill_jerk = 9
top_surface_jerk = 9
first_layer_jerk = 9
travel_jerk = 9
compatible_printers = re3D Gigabot X2 1.75 nozzle,re3D Gigabot X2 XLT 1.75 nozzle,re3D Terabot X2 1.75 nozzle

[print:0.2mm Fine @re3D fdm 0.4]
setting_id = GP004
from = system
inherits = fdm_process_re3D_common
instantiation = true
layer_height = 0.2
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle
line_width = 0.42
outer_wall_line_width = 0.42
inner_wall_line_width = 0.42
initial_layer_line_width = 0.5
sparse_infill_line_width = 0.42
internal_solid_infill_line_width = 0.42
top_surface_line_width = 0.42
support_line_width = 0.42

[print:0.26mm Standard @re3D fdm 0.4]
setting_id = GP004
from = system
instantiation = true
inherits = fdm_process_re3D_common
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle
layer_height = 0.26
initial_layer_print_height = 0.4
top_shell_layers = 4
top_shell_thickness = 0.6
bottom_shell_layers = 3
line_width = 0.45
outer_wall_line_width = 0.45
inner_wall_line_width = 0.45
initial_layer_line_width = 0.6
sparse_infill_line_width = 0.45
internal_solid_infill_line_width = 0.45
top_surface_line_width = 0.45
support_line_width = 0.45
overhang_1_4_speed = 45
overhang_2_4_speed = 35
overhang_3_4_speed = 25
overhang_4_4_speed = 15
initial_layer_speed = 30
initial_layer_infill_speed = 30
initial_layer_travel_speed = 50
outer_wall_speed = 80
inner_wall_speed = 80
small_perimeter_speed = 80
small_perimeter_threshold = 80
sparse_infill_speed = 80
internal_solid_infill_speed = 80
top_surface_speed = 80
gap_infill_speed = 80
support_speed = 80
support_interface_speed = 80
travel_speed = 300
standby_temperature_delta = -55
support_top_z_distance = 0.28
support_bottom_z_distance = 0.28

[print:0.32mm Draft @re3D fdm 0.4]
setting_id = GP004
from = system
instantiation = true
inherits = fdm_process_re3D_common
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle
layer_height = 0.32
initial_layer_print_height = 0.4
top_shell_layers = 4
top_shell_thickness = 0.6
bottom_shell_layers = 3
line_width = 0.48
outer_wall_line_width = 0.48
inner_wall_line_width = 0.48
initial_layer_line_width = 0.6
sparse_infill_line_width = 0.48
internal_solid_infill_line_width = 0.48
top_surface_line_width = 0.48
support_line_width = 0.48
overhang_1_4_speed = 45
overhang_2_4_speed = 35
overhang_3_4_speed = 25
overhang_4_4_speed = 15
initial_layer_speed = 30
initial_layer_infill_speed = 30
initial_layer_travel_speed = 50
outer_wall_speed = 80
inner_wall_speed = 80
small_perimeter_speed = 80
small_perimeter_threshold = 80
sparse_infill_speed = 80
internal_solid_infill_speed = 80
top_surface_speed = 80
gap_infill_speed = 80
support_speed = 80
support_interface_speed = 80
travel_speed = 300
standby_temperature_delta = -55
support_top_z_distance = 0.35
support_bottom_z_distance = 0.35

[print:0.2mm Standard @re3D fdm 0.8]
setting_id = GP004
from = system
inherits = fdm_process_re3D_common
instantiation = true
compatible_printers = re3D Gigabot 4 0.8 nozzle,re3D Gigabot 4 XLT 0.8 nozzle,re3D Terabot 4 0.8 nozzle
layer_height = 0.2
initial_layer_print_height = 0.4
top_shell_layers = 4
top_shell_thickness = 0.6
bottom_shell_layers = 3
line_width = 0.8
outer_wall_line_width = 0.8
inner_wall_line_width = 0.8
initial_layer_line_width = 0.8
sparse_infill_line_width = 0.8
internal_solid_infill_line_width = 0.8
top_surface_line_width = 0.8
support_line_width = 0.8
overhang_1_4_speed = 45
overhang_2_4_speed = 35
overhang_3_4_speed = 25
overhang_4_4_speed = 15
initial_layer_speed = 30
initial_layer_infill_speed = 30
initial_layer_travel_speed = 50
outer_wall_speed = 45
inner_wall_speed = 45
small_perimeter_speed = 45
small_perimeter_threshold = 45
sparse_infill_speed = 45
internal_solid_infill_speed = 45
top_surface_speed = 45
gap_infill_speed = 45
support_speed = 45
support_interface_speed = 45
travel_speed = 300
standby_temperature_delta = -55
support_top_z_distance = 0.24
support_bottom_z_distance = 0.24

[print:0.4mm Draft @re3D fdm 0.8]
setting_id = GP004
from = system
instantiation = true
inherits = fdm_process_re3D_common
compatible_printers = re3D Gigabot 4 0.8 nozzle,re3D Gigabot 4 XLT 0.8 nozzle,re3D Terabot 4 0.8 nozzle
layer_height = 0.4
initial_layer_print_height = 0.6
top_shell_layers = 4
top_shell_thickness = 0.6
bottom_shell_layers = 3
line_width = 1
outer_wall_line_width = 1
inner_wall_line_width = 1
initial_layer_line_width = 1
sparse_infill_line_width = 1
internal_solid_infill_line_width = 1
top_surface_line_width = 1
support_line_width = 1
overhang_1_4_speed = 45
overhang_2_4_speed = 35
overhang_3_4_speed = 25
overhang_4_4_speed = 15
initial_layer_speed = 30
initial_layer_infill_speed = 30
initial_layer_travel_speed = 50
outer_wall_speed = 45
inner_wall_speed = 45
small_perimeter_speed = 45
small_perimeter_threshold = 45
sparse_infill_speed = 45
internal_solid_infill_speed = 45
top_surface_speed = 45
gap_infill_speed = 45
support_speed = 45
support_interface_speed = 45
travel_speed = 300
standby_temperature_delta = -55
support_top_z_distance = 0.42
support_bottom_z_distance = 0.42

[print:1.0mm Standard @re3D fgf 1.75]
setting_id = GP004
from = system
inherits = fgf_process_re3D_common
instantiation = true
layer_height = 1.0
bottom_shell_layers = 2
top_shell_layers = 5
compatible_printers = re3D Gigabot X2 1.75 nozzle,re3D Gigabot X2 XLT 1.75 nozzle,re3D Terabot X2 1.75 nozzle

[filament:fdm_filament_common]
from = system
instantiation = false
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
textured_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
textured_plate_temp_initial_layer = 60
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 60
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 2.85
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming_volume = 15
filament_multitool_ramming_flow = 15
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_z_hop_types = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
bed_type = Cool Plate
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 0
fan_max_speed = 100
fan_min_speed = 35
slow_down_min_speed = 10
slow_down_layer_time = 8
filament_start_gcode = ; Filament gcode

nozzle_temperature = 200
temperature_vitrification = 100
filament_loading_speed_start = 0
filament_loading_speed = 0
filament_unloading_speed_start = 0
filament_unloading_speed = 0
filament_cooling_moves = 0
filament_cooling_initial_speed = 0
filament_cooling_final_speed = 0

[filament:fdm_filament_pet]
from = system
instantiation = false
inherits = fdm_filament_common
filament_density = 1.27
filament_cost = 0
temperature_vitrification = 70
close_fan_the_first_x_layers = 3
enable_overhang_bridge_fan = 1
fan_cooling_layer_time = 30
fan_max_speed = 100
fan_min_speed = 80
filament_diameter = 2.85
filament_flow_ratio = 0.91
filament_max_volumetric_speed = 9.5
filament_minimal_purge_on_wipe_tower = 15
filament_type = PETG
hot_plate_temp = 70
hot_plate_temp_initial_layer = 70
nozzle_temperature = 250
nozzle_temperature_initial_layer = 250
nozzle_temperature_range_low = 230
nozzle_temperature_range_high = 250
overhang_fan_threshold = 95%
pressure_advance = 0.205
reduce_fan_stop_start_freq = 1
slow_down_layer_time = 8
slow_down_min_speed = 10
support_material_interface_fan_speed = 100

[filament:fdm_filament_pla]
from = system
instantiation = false
inherits = fdm_filament_common
filament_flow_ratio = 0.91
pressure_advance = 0.11
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 12
filament_type = PLA
filament_density = 1.24
filament_cost = 20
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
textured_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
textured_plate_temp_initial_layer = 60
nozzle_temperature_initial_layer = 220
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
overhang_fan_threshold = 0%
close_fan_the_first_x_layers = 1
nozzle_temperature = 220
temperature_vitrification = 45
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 230
slow_down_min_speed = 10
slow_down_layer_time = 4
additional_cooling_fan_speed = 70
filament_start_gcode = ; filament start gcode

[filament:fdm_filament_pc]
from = system
instantiation = false
inherits = fdm_filament_common
pressure_advance = 0.096
cool_plate_temp = 115
eng_plate_temp = 115
hot_plate_temp = 115
textured_plate_temp = 115
cool_plate_temp_initial_layer = 113
eng_plate_temp_initial_layer = 113
hot_plate_temp_initial_layer = 113
textured_plate_temp_initial_layer = 113
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
slow_down_layer_time = 2
filament_max_volumetric_speed = 12
filament_type = PC
filament_density = 1.04
filament_cost = 0
nozzle_temperature_initial_layer = 260
reduce_fan_stop_start_freq = 1
fan_max_speed = 60
fan_min_speed = 10
overhang_fan_speed = 60
overhang_fan_threshold = 25%
support_material_interface_fan_speed = 100
nozzle_temperature = 260
temperature_vitrification = 120
nozzle_temperature_range_low = 260
nozzle_temperature_range_high = 280
filament_start_gcode = ; filament start gcode

[filament:re3D Greengate rPETG]
filament_id = GFG99
setting_id = GFSG99
from = system
instantiation = true
inherits = fdm_filament_pet
nozzle_temperature_initial_layer = 255
nozzle_temperature = 255
nozzle_temperature_range_low = 220
nozzle_temperature_range_high = 260
hot_plate_temp_initial_layer = 80
hot_plate_temp = 80
filament_flow_ratio = 1.02
enable_pressure_advance = 0
slow_down_layer_time = 20
slow_down_min_speed = 25
filament_start_gcode = M190 S75
M104 S220 T0
M104 S210 T1
M104 S200 T2
M109 S220 T0
M109 S210 T1
M109 S200 T2
compatible_printers = re3D Gigabot X2 1.75 nozzle,re3D Gigabot X2 XLT 1.75 nozzle,re3D Terabot X2 1.75 nozzle

[filament:re3D PC]
filament_id = GFG99
setting_id = GFSG99
from = system
instantiation = true
inherits = fdm_filament_pc
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle,re3D Gigabot 4 0.8 nozzle,re3D Gigabot 4 XLT 0.8 nozzle,re3D Terabot 4 0.8 nozzle

[filament:re3D PETG]
filament_id = GFG99
setting_id = GFSG99
from = system
instantiation = true
inherits = fdm_filament_pet
filament_start_gcode = ; Filament gcode
filament_end_gcode = ; filament end gcode
filament_retraction_length = 1
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle,re3D Gigabot 4 0.8 nozzle,re3D Gigabot 4 XLT 0.8 nozzle,re3D Terabot 4 0.8 nozzle

[filament:re3D PLA]
filament_id = GFL99
setting_id = GFSL99
from = system
instantiation = true
inherits = fdm_filament_pla
compatible_printers = re3D Gigabot 4 0.4 nozzle,re3D Gigabot 4 XLT 0.4 nozzle,re3D Terabot 4 0.4 nozzle,re3D Gigabot 4 0.8 nozzle,re3D Gigabot 4 XLT 0.8 nozzle,re3D Terabot 4 0.8 nozzle

[filament:re3D rPP]
filament_id = GFG99
setting_id = GFSG99
from = system
instantiation = true
inherits = fdm_filament_pet
filament_type = PP
nozzle_temperature_initial_layer = 185
nozzle_temperature = 185
nozzle_temperature_range_low = 180
nozzle_temperature_range_high = 200
hot_plate_temp_initial_layer = 110
hot_plate_temp = 110
filament_flow_ratio = 1.18
enable_pressure_advance = 0
slow_down_layer_time = 60
slow_down_min_speed = 10
filament_start_gcode = M190 S110
M104 S185 T0
M104 S185 T1
M104 S185 T2
M109 S185 T0
M109 S185 T1
M109 S185 T2
compatible_printers = re3D Gigabot X2 1.75 nozzle,re3D Gigabot X2 XLT 1.75 nozzle,re3D Terabot X2 1.75 nozzle