mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 08:50:02 +00:00
Dark98
17 lines
4.7 KiB
INI
17 lines
4.7 KiB
INI
[printer:Ultimaker 2 DXUv2]
|
|
inherits = Ultimaker 2
|
|
printer_model = ULTIMAKER2
|
|
bed_shape = 0x0,224x0,224x225,0x225
|
|
extruder_offset = 0x0,0x0 ; stock DXUv2 offset is X18 Y0 but this should be applied in firmware and PS does not provide option to turn off extruder offset correction so we leave it at 0 in slicer
|
|
printer_variant = 0.4
|
|
nozzle_diameter = 0.4,0.4
|
|
gcode_flavor = marlin2
|
|
default_print_profile = 0.20mm NORMAL @ULTIMAKER
|
|
default_filament_profile = Generic PLA @ULTIMAKER
|
|
toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}
|
|
start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n; DXUv2 improved PS start priming Gcode for dual nozzles for multi-material print\nM355 S1 P25 ; Turn on case light dim\nM190 S[first_layer_bed_temperature]\nG28 ; Home all\n;M420 S1 ; Enable and load bed mesh\nG29 ; Run automatic bed leveling. Comment this line out if auto bed leveling is not desired.\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Preheat T0 to standby temp\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Preheat T1 to standby temp\nG21 ; Metric values\nG90 ; Absolute positioning\nM82 ; Set extruder to absolute mode\nM107 ; Start with the fan off\nM200 D0 T0 ; Reset filament diameter\nM200 D0 T1 ; Reset filament diameter\nG0 X200 F7200 ; Move to safe X and Y location from right side after ending ABL homing. Move X before Y to avoid hitting switching lever.\nG1 Y150 F7200\n; Prime routine for T1 in normally \nT1 ; move to the nozzle 2\nM104 T1 S{temperature[1]} ; Start heating up T1\nG0 Z10 F2400 ; move the platform down to 10mm\nM109 T1 S{temperature[1]} ; Heat up and wait for T1\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X50 Y1 F7200 ; Add HOTEND_OFFSET_Y index 1 to Y0 (or forward-most safe Y location when T1 is active) to get Gcode Y parameter\nG0 X95 Z0.3 F2400 ; lower nozzle\nG92 E0 ; reset E location\nG1 X225 Y1 Z0.3 E{retract_length_toolchange[1]} F1500 ; Add HOTEND_OFFSET_X index 1 to X217 (or right-most safe X location when T1 is active) to get actual Gcode X parameter.\nG3 X235 Y11 I0 J10 F7200\nG0 X235 Y11 Z0.3 F7200\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0\nG1 Y70 E3 F1000 ; intro line\nM104 T1 S{temperature[1] + standby_temperature_delta}\nG92 E0 \nG1 E-{retract_length_toolchange[1]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Prime routine for T0\nT0 ; move to the nozzle 1\nM104 T0 S{temperature[0]} ; Start heating up T0\nG0 Z10 F2400\nM109 T0 S{temperature[0]}\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X32 Y3 F7200\nG0 X77 Z0.3 F2400\nG92 E0 ; reset E location\nG1 X207 Y3 Z0.3 E{retract_length_toolchange[0]} F1500\nG3 X217 Y13 I0 J10 F7200\nG0 X217 Y13 Z0.3 F7200\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0 ; reset E location\nG1 Y72 E3 F1000 ; intro line\nM104 T0 S{temperature[0] + standby_temperature_delta}\nM104 T{initial_extruder} S{temperature[initial_extruder]} ; Start heating initial nozzle. Do not wait.\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Final prime and wipe sequence for initial extruder (usually T0)\nT{initial_extruder} ; move to the initial nozzle used for print\nM400 ;finish all moves\nG0 Z20 F2400\nG0 X212 F7200\nG0 Y70 F7200\nM109 T{initial_extruder} S{temperature[initial_extruder]} ; Wait for initial nozzle to reach temp\nG92 E0\nG1 E{retract_length_toolchange[initial_extruder]} F1200 ; prime by switching length\nG0 X217 Y50 Z0.5 F7200\nG92 E0\nG0 Y9.4 Z0.5 E3 F7200\nG2 X212 Y3.4 Z0.4 I-6 J0 F7200\nM104 T{initial_extruder} S{first_layer_temperature[initial_extruder]} ; Start heating to first layer temp\nG0 X207 Y3.4 Z0.4 F7200\nG2 X205 Y5.4 Z0.3 I0 J2 F7200\nG0 X205 Y5.4 Z0.3 F7200\nG1 Y10 F18000 ; break line\nG92 E0\nG1 Y50 E2 F1000 ; extrude line\nG92 E0\nG1 E-0.5 F1500 ; retract slightly\nG1 Y100 F18000 ; break line\nG92 E0\nM355 S1 P255; Turn on case light brighter\n;end of startup sequence
|
|
end_gcode = ;End G-code\nG91 ;Relative movement\nG0 X-8.0 Y-8.0 Z3.5 E-4.5 F18000 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement\nM400 ;wait for all moves in planner to complete\nG90 ;absolute positioning\nM104 S0 T0 ;extruder heater off\nM104 S0 T1\nM140 S0 ;turn off bed\nT0 ; move to the first head\nG27; park toolhead\nM107 ;fan off\nM355 S0;turn off case light
|
|
max_layer_height = 0.3
|
|
min_layer_height = 0.06
|
|
|