Profiles/profile_sources/non-prusa-fff/E2D/print/0.16mm SPEED @E2D 0.30 nozzle i311.ini

[print:0.16mm SPEED @E2D 0.30 nozzle i311]
inherits = *0.16mm*; *0.3nozzle*; *i311*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
first_layer_height = 0.2
top_solid_layers = 6
bottom_solid_layers = 5
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
extra_perimeters = 0
detect_thin_walls = 0
thick_bridges = 0
overhangs = 1
fill_density = 20%
infill_anchor = 1.5
raft_contact_distance = 0.15
raft_first_layer_density = 80%
support_material_threshold = 45
raft_first_layer_expansion = 3
support_material_contact_distance = 0.15
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_xy_spacing = 60%
perimeter_speed = 50
small_perimeter_speed = 25
external_perimeter_speed = 25
infill_speed = 90
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed = 45
support_material_interface_speed = 80%
bridge_speed = 25
gap_fill_speed = 40
ironing_speed = 15
enable_dynamic_overhang_speeds = 1
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
first_layer_speed = 20
external_perimeter_acceleration = 600
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1250
infill_acceleration = 2000
bridge_acceleration = 800
first_layer_acceleration = 600
first_layer_acceleration_over_raft = 0
wipe_tower_acceleration = 0
travel_acceleration = 0
default_acceleration = 1000
extrusion_width = 0.33
first_layer_extrusion_width = 0.4
perimeter_extrusion_width = 0.33
external_perimeter_extrusion_width = 0.33
infill_extrusion_width = 0.33
solid_infill_extrusion_width = 0.33
top_infill_extrusion_width = 0.3
support_material_extrusion_width = 0.3
infill_overlap = 10%
elefant_foot_compensation = 0