mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-05 16:59:08 +00:00
Dark98
60 lines
2.8 KiB
INI
60 lines
2.8 KiB
INI
[printer:*common*]
|
|
printer_technology = FFF
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n
|
|
between_objects_gcode =
|
|
pause_print_gcode =
|
|
deretract_speed = 40
|
|
extruder_colour = #FCE94F
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 0
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_travel = 500
|
|
machine_max_acceleration_x = 500
|
|
machine_max_acceleration_y = 500
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
machine_limits_usage = emit_to_gcode
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
|
|
max_print_height = 250
|
|
printer_notes =
|
|
printer_settings_id =
|
|
retract_before_travel = 2
|
|
retract_before_wipe = 70%
|
|
retract_layer_change = 1
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 60
|
|
single_extruder_multi_material = 0
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|
|
printer_model =
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 55
|
|
default_filament_profile = "Generic PLA @CREALITY"
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{is_nil(idle_temperature[0]) ? 150 : idle_temperature[0]} ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
|
|
|
|
# Intended for printers that have exclusively shipped with a 32bit mainboard
|