mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 08:50:02 +00:00
Dark98
31 lines
2.7 KiB
INI
31 lines
2.7 KiB
INI
[printer:FLSun Q5]
|
|
inherits = *common_flsunq*
|
|
bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
|
|
end_gcode = M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n
|
|
machine_max_acceleration_e = 3000
|
|
machine_max_acceleration_extruding = 1500
|
|
machine_max_acceleration_retracting = 2000
|
|
machine_max_acceleration_x = 1500
|
|
machine_max_acceleration_y = 1500
|
|
machine_max_acceleration_z = 1500
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 200
|
|
machine_max_feedrate_y = 200
|
|
machine_max_feedrate_z = 200
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 5
|
|
machine_max_jerk_y = 5
|
|
machine_max_jerk_z = 5
|
|
max_print_height = 200
|
|
nozzle_diameter = 0.4
|
|
printer_model = Q5
|
|
printer_variant = 0.4
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n
|
|
retract_length = 3
|
|
retract_lift = 0.3
|
|
start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n
|
|
thumbnails = 16x16,200x200
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
|