mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 16:59:21 +00:00
Dark98
64 lines
2.3 KiB
INI
64 lines
2.3 KiB
INI
[printer:*common*]
|
|
bed_shape = 0x0,300x0,300x300,0x300
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
deretract_speed = 0,0
|
|
end_gcode = T-1 ; desect current tool\nG0 Z305 ; move bed all the way to the bottom\nM104 S0 T0; turn off extruder 0\nM104 S0 T1; turn off extruder 1\nM140 S0 ; turn off bed\nG0 X0 Y0 F30000; return home\nM84 S600; disable motors after ten mins of inactivity\n
|
|
extra_loading_move = -2
|
|
extruder_colour = #FF8000;#0080FF
|
|
extruder_offset = 0x0,0x0
|
|
gcode_flavor = marlin
|
|
high_current_on_filament_swap = 0
|
|
layer_gcode =
|
|
machine_max_acceleration_e = 1500
|
|
machine_max_acceleration_extruding = 1500
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 1000
|
|
machine_max_acceleration_y = 1000
|
|
machine_max_acceleration_z = 20
|
|
machine_max_feedrate_e = 8000
|
|
machine_max_feedrate_x = 13000
|
|
machine_max_feedrate_y = 13000
|
|
machine_max_feedrate_z = 800
|
|
machine_max_jerk_e = 50
|
|
machine_max_jerk_x = 17
|
|
machine_max_jerk_y = 17
|
|
machine_max_jerk_z = 0.1
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
machine_limits_usage = time_estimate_only
|
|
max_layer_height = 0.3,0.3
|
|
max_print_height = 300
|
|
min_layer_height = 0.05,0.05
|
|
nozzle_diameter = 0.4,0.4
|
|
parking_pos_retraction = 92
|
|
printer_model =
|
|
printer_technology = FFF
|
|
remaining_times = 0
|
|
retract_before_travel = 2,2
|
|
retract_before_wipe = 0%,0%
|
|
retract_layer_change = 0,0
|
|
retract_length = 1,1
|
|
retract_length_toolchange = 1,1
|
|
retract_lift = 0.2,0.2
|
|
retract_lift_above = 0,0
|
|
retract_lift_below = 0,0
|
|
retract_restart_extra = 0.05,0.05
|
|
retract_restart_extra_toolchange = 0,0
|
|
retract_speed = 133,133
|
|
silent_mode = 0
|
|
single_extruder_multi_material = 0
|
|
start_gcode = G91 ; relative moves\nG1 Z1 F900 ; raise tool 1mm\nG90 ; absolute moves\nT-1 ; Make sure nothing is parked on the carriage\nG0 X150 Y150 F10000; Move to the center of the print area\nM558 F500 ; Set the probing speed\nG30 ; Do a single probe\nM558 F50 ; Set a slower probing speed\nG30 ; Do a second probe\nT[current_extruder]
|
|
thumbnails =
|
|
toolchange_gcode = T[next_extruder]
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 0
|
|
wipe = 0,0
|
|
z_offset = 0
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0
|
|
default_filament_profile = "Generic PLA @Jubilee; Generic PLA @Jubilee"
|
|
default_print_profile = 0.2mm V6, aesthetic @Jubilee
|
|
|