mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 16:59:21 +00:00
Dark98
61 lines
3.4 KiB
INI
61 lines
3.4 KiB
INI
[printer:*common*]
|
|
printer_technology = FFF
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n
|
|
between_objects_gcode =
|
|
pause_print_gcode =
|
|
deretract_speed = 40,40
|
|
extruder_colour = #FCE94F;#FCE94F
|
|
extruder_offset = 0x0,0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 0
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_travel = 500
|
|
machine_max_acceleration_x = 500
|
|
machine_max_acceleration_y = 500
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
machine_limits_usage = time_estimate_only
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
|
|
printer_notes =
|
|
printer_settings_id =
|
|
retract_before_travel = 2,2
|
|
retract_before_wipe = 70%,70%
|
|
retract_layer_change = 1,1
|
|
retract_length = 1,1
|
|
retract_length_toolchange = 1,1
|
|
retract_lift = 0,0
|
|
retract_lift_above = 0,0
|
|
retract_lift_below = 0,0
|
|
retract_restart_extra = 0,0
|
|
retract_restart_extra_toolchange = 0,0
|
|
retract_speed = 60,60
|
|
single_extruder_multi_material = 0
|
|
toolchange_gcode = (if current extruder ==0}\nG1 F1800\n{if current_extruder ==1}\nG1 F1800\n{endif}
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1,1
|
|
z_offset = 0
|
|
printer_model =
|
|
extruder_clearance_height = 5
|
|
extruder_clearance_radius = 36
|
|
default_filament_profile = "Generic PLA @LNL3D"
|
|
start_gcode = G21 ; Metric values\nG90 ; Absolute positioning\nM82 ; Set extruder to absolute mode\nM107 ; Start with the fan off\nG28 ; Move to min endstops\nG92 E0 ; Reset extruder\nG1 Z15.0 F3000 ; Move the header up 15mm\nM117 Final warmup ; LCD message\nM140 S[first_layer_bed_temperature] ; Set bed temp\nM190 S{first_layer_bed_temperature[0] - 5} ; Wait for bed temp-5\nM104 S[first_layer_temperature] ; Heat extruder rest of the way after heatbed\nM109 S[first_layer_temperature] ; Wait for extruder temp\nG1 X40 Y5 Z4 F5000.0 ; Move to position to prevent hitting clamps or bed\nG1 X50 Y5 Z0.3 F5000.0 ; Move to start position\nG1 X110 Y5 Z0.3 F1500.0 E15 ; First purge line\nG1 X70 Y5 Z0.3 F1500.0 E8 ; Second pass\nM117 Printing... ; LCD message\n
|
|
end_gcode = M104 T0 S0 ;left extruder heater off\nM104 T1 S0 ;right extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning
|
|
|
|
|
|
|