mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Dark98
30 lines
1.7 KiB
INI
30 lines
1.7 KiB
INI
[printer:MakerGear M3 Single Extruder]
|
|
inherits = *default*
|
|
bed_shape = 0x0,200x0,200x251,0x251
|
|
default_filament_profile = "MakerGear PLA @MakerGear"
|
|
default_print_profile = 0.20mm Normal @0.35 nozzle MakerGear
|
|
end_gcode = M104 S0 ; turn off extruder\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG1 Z200 Y0 X215 F10000\nM106 S0\nM84 ; disable motors
|
|
host_type = octoprint
|
|
machine_max_acceleration_e = 2000, 2000
|
|
machine_max_acceleration_extruding = 1000, 1000
|
|
machine_max_acceleration_retracting = 2000, 2000
|
|
machine_max_acceleration_x = 1200, 1200
|
|
machine_max_acceleration_y = 1200, 1200
|
|
machine_max_acceleration_z = 10, 10
|
|
machine_max_feedrate_e = 30, 30
|
|
machine_max_feedrate_x = 300, 300
|
|
machine_max_feedrate_y = 300, 300
|
|
machine_max_feedrate_z = 10, 10
|
|
machine_max_jerk_e = 10, 10
|
|
machine_max_jerk_x = 5, 5
|
|
machine_max_jerk_y = 5, 5
|
|
machine_max_jerk_z = 1, 1
|
|
max_print_height = 200
|
|
nozzle_diameter = 0.35
|
|
printer_model = MAKERGEAR_M3_SE
|
|
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M3_SE\n
|
|
printer_variant = 0.35
|
|
start_gcode = G28 ; home all axes\nG1 X215 Y40 Z0.1 F10000 ; move off the bed and bring the bed up\nM109 S[first_layer_temperature_[current_extruder]]\nG92 E0 ; zero extruder\nG1 X195 Z0.1 F1000; scrape off any ooze\nG1 Z5 ; lift\nG1 X170 Y3 F10000; move to unused front edge\nG1 Z0.30 F1000\nG1 X40 E20 F1000\nG1 X30 Z0.05 F1000 ; wipe off tail\nG1 Z1\nG92 E0\nM211 S0 ;disable software endstops\n; ok now you can start
|
|
# thumbnails = 16x16,220x124
|
|
|