mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-05 00:39:37 +00:00
Dark98
83 lines
2.8 KiB
INI
83 lines
2.8 KiB
INI
[filament:Generic TPU @Papapiu]
|
|
inherits = Generic PLA @Papapiu
|
|
bed_temperature = 30
|
|
bridge_fan_speed = 100
|
|
bridge_internal_fan_speed = -1
|
|
chamber_temperature = 0
|
|
compatible_printers =
|
|
compatible_printers_condition =
|
|
compatible_prints =
|
|
compatible_prints_condition =
|
|
cooling = 0
|
|
disable_fan_first_layers = 2
|
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
external_perimeter_fan_speed = -1
|
|
extrusion_multiplier = 0.89
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FF00FF
|
|
filament_cooling_final_speed = 3.4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_moves = 4
|
|
filament_cooling_zone_pause = 0
|
|
filament_cost = 20
|
|
filament_custom_variables = ""
|
|
filament_density = 1.24
|
|
filament_deretract_speed = nil
|
|
filament_diameter = 1.75
|
|
filament_dip_extraction_speed = 70
|
|
filament_dip_insertion_speed = 33
|
|
filament_enable_toolchange_part_fan = 0
|
|
filament_enable_toolchange_temp = 0
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_overlap = 100%
|
|
filament_max_speed = 0
|
|
filament_max_volumetric_speed = 5
|
|
filament_max_wipe_tower_speed = 0
|
|
filament_melt_zone_pause = 0
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = "This is a profile for TPU95A. It was tested with Anycubic TPU95A, but most of the economy TPU filaments behave pretty similar.\n\nYou will want to optimize the temperature. Even different colors of the same brand can require 10° more or less.\n\nIf you experience clogs or grinding, reduce the maximum volumetric speed!"
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_before_travel = nil
|
|
filament_retract_before_wipe = nil
|
|
filament_retract_layer_change = nil
|
|
filament_retract_length = 1
|
|
filament_retract_lift = 0.1
|
|
filament_retract_lift_above = nil
|
|
filament_retract_lift_below = nil
|
|
filament_retract_restart_extra = nil
|
|
filament_retract_speed = nil
|
|
filament_seam_gap = nil
|
|
filament_shrink = 100%
|
|
filament_skinnydip_distance = 31
|
|
filament_soluble = 0
|
|
filament_spool_weight = 0
|
|
filament_toolchange_delay = 0
|
|
filament_toolchange_part_fan_speed = 50
|
|
filament_toolchange_temp = 200
|
|
filament_type = FLEX
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_use_fast_skinnydip = 0
|
|
filament_use_skinnydip = 0
|
|
filament_vendor = Generic
|
|
filament_wipe = nil
|
|
filament_wipe_advanced_pigment = 0.5
|
|
filament_wipe_extra_perimeter = nil
|
|
filament_wipe_only_crossing = nil
|
|
filament_wipe_speed = nil
|
|
first_layer_bed_temperature = 30
|
|
first_layer_temperature = 220
|
|
full_fan_speed_layer = 4
|
|
max_fan_speed = 100
|
|
max_speed_reduction = 95%
|
|
min_fan_speed = 100
|
|
min_print_speed = 10
|
|
slowdown_below_layer_time = 8
|
|
start_filament_gcode = ""
|
|
temperature = 220
|
|
top_fan_speed = -1
|